5915-01-385-1866
FILTER,RADIO FREQUENCY INTERFERENCE
5915-01-385-1866 (5915013851866, 013851866)
Part Numbers (3 listings): 05A079W403A46 | TBKB42226-1000 | 842839-3 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 05A079W403A46 | 3 - Design Control Reference | 2 - Production Item | ITT CORPORATION | 71468 |  |
| TBKB42226-1000 | 5 - Replaced / Discontinued | 9 - No Longer Used | ITT CANNON ELECTRIC | 08718 |  |
| 842839-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | TYCO ELECTRONICS CORPORATION | 00779 |  |
| 05A079W403A46 | 7 - Vendor Item Drawing Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 1W025 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5915 | 013851866 | A047B0 | 00765 | X | 4 | 3 | A | P | A | 6 Jan 1994 |
A047B0
Federal Item Identification Guide (FIIG_4065)
00765
Item Naming Code (INC_4080)
6 Jan 1994
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FXX5 | FNN5 | 1 | C | B | TN | 27 Jun 2007 | ||||||||||||||||||||||||
| FNN5 | 1 | C | B | 1 Jun 2014 | ||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
B
Item Management Code (IMC_2744)
Performance Based Logistics or Contractor Logistics Support: Consumable items that are unique to a weapon system which have been included in a Performance Based Logistics (PBL) or Contractor Logistics Support (CLS) contract. (PICA LOA must be 06 or 23).
TN Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Northrop Grumman Corporation, Los Angeles, CA 90067-2199
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 05A079W403A46 | 71468 | | ||||||
| 5 | 9 | 5 | ZZ | B | 842839-3 | 00779 | | |||||
| 5 | 9 | 5 | ZZ | B | TBKB42226-1000 | 08718 | | |||||
| 7 | 2 | A | ZZ | 05A079W403A46 | 1W025 | | ||||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 8 Jan 1994 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
8 Jan 1994
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TH | Z | 72D | Z | 9 | A | H | Z | P | 061990 | X | 58500 | ELECTRICAL-EQUIP-FILTERS | 1 |
TH
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43215
Z
Less Than Carload (LCL_CD_2760)
No Rating
72D
Water Commodity Code (WRT_CMDTY_CD_9275)
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
061990
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58500
Uniform Freight Classification (UFC_CD_MODF_3040)
ELECTRICAL-EQUIP-FILTERS
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
F59
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Northrop Grumman IS ACS, FOR DEPOT STORAGE ONLY, 6401 S. Air Depot Blvd., Oklahoma City, OK 73135-5911
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
0
Quantity Unit Pack (QUP_6106)
No QUP
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | GX | 1 | 000 | 1.5 lbs | 6.3in x 5.3in x 4in | 0.077 cu ft | 1.0 lbs | 4in x 2in x 2in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | K3 | NB | A | NS | 00 | B | 39 | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
GX
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preserve by Method 41 as follows: Items subject to damage by electromagnetic and electrostatic field forces shall be initially wrapped in material conforming to MIL-PRF-81705, Type III, or bags conforming to MIL-DTL-117, Type II, Class H, Style 2, or cushioned in material conforming to A-A-3129, Type I, Grade B or PPP-C-795, Class 2 or PPP-C-1797, Type II, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to MIL-DTL-117, Type I, Class F, Style 1. Reclosable cushioned pouches conforming to MIL-DTL-81997, Type I or II, may be used in lieu of initial wrap or cushioning. Lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. Materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. Electrostatic discharge (ESD) sensitive caution labels shall be applied in accordance with MIL-STD-129.
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
1.5 lbs
Unit Pack Weight (UP_WT_5153)
6.3in x 5.3in x 4in
Unit Pack Size (UP_SZ_5154)
0.077 cu ft
Unit Pack Cube (UP_CU_5155)
1.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
4in x 2in x 2in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
K3
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-81705, Type III, Class 1, transparent, electrostatic protective, static shielding, barrier material or MIL-DTL-117, Type II, Class H, Style 2 bag
NB
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
A-A-3129, Type I, Grade B, anti-static open cell plastic cushioning; or PPP-C1797, Type II, polypropylene foam cushioning. Other electrostatic free cushioning is acceptable provided it meets the static decay rate test requirement of A-A-3129.
A
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
1/4 inch thick
NS
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-1672, Type II, folding convoluted cushioning in reusable box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
39
Special Marking Code (SP_MKG_CD_5169)
ESD sensitive electronic device requirements of MIL-STD-129 apply
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CQRG | Body Material | METAL |
| CQDW | Functional Terminal Type And Quantity | 514 FRICTION W/GROUNDING STRAP AND PIN INPUT-OUTPUT/GROUND |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 1ST RADIO INTERFERENCE |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 2ND RADIO INTERFERENCE |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 3RD RADIO INTERFERENCE |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 4TH RADIO INTERFERENCE |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 5TH RADIO INTERFERENCE |
| AHBC | Operating Current Rating Per Function In Amps | 5.0 6TH RADIO INTERFERENCE |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION AND 250.0 VOLTS DC 1ST RADIO INTERFERENCE 1ST FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION AND 250.0 VOLTS DC 2ND RADIO INTERFERENCE 2ND FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 4TH RADIO INTERFERENCE 4TH FUNCTION AND 250.0 VOLTS DC 4TH RADIO INTERFERENCE 4TH FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 5TH RADIO INTERFERENCE 5TH FUNCTION AND 250.0 VOLTS DC 5TH RADIO INTERFERENCE 5TH FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION AND 250.0 VOLTS DC 3RD RADIO INTERFERENCE 3RD FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 125.0 VOLTS AC 6TH RADIO INTERFERENCE 6TH FUNCTION AND 250.0 VOLTS DC 6TH RADIO INTERFERENCE 6TH FUNCTION |
| AKNA | Inclosure Type | HERMETICALLY SEALED |
| AHAS | Load Impedance Per Function | 50.0 OHMS 1ST RADIO INTERFERENCE |
| AHAS | Load Impedance Per Function | 50.0 OHMS 3RD RADIO INTERFERENCE |
| AHAS | Load Impedance Per Function | 50.0 OHMS 4TH RADIO INTERFERENCE |
| AHAS | Load Impedance Per Function | 50.0 OHMS 2ND RADIO INTERFERENCE |
| AHAS | Load Impedance Per Function | 50.0 OHMS 5TH RADIO INTERFERENCE |
| AHAS | Load Impedance Per Function | 50.0 OHMS 6TH RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 1ST RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 4TH RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 2ND RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 3RD RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 5TH RADIO INTERFERENCE |
| AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 6TH RADIO INTERFERENCE |
Back to TopBack to Top
