Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
17343-8-350 | 3 - Design Control Reference | 2 - Production Item | KIDDE TECHNOLOGIES INC | 73168 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5930 | 002630730 | A048B0 | 00451 | X | 1 | A | P | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Dec 2007 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 1 | TX | D | 17343-8-350 | 73168 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | TX | 0 | 15 Dec 1974 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P | 658 | Z | 9 | A | H | Z | P | 061300 | X | 34410 | CIRCUIT-BREAKER-SWITCH-NOI |
77.5
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ABPM | Body Diameter | 0.618 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
ADAQ | Body Length | 3.594 INCHES NOMINAL |
CQGB | Contact Action Stimulus | INCREASE |
CTYC | Contact Adjustability | DEACTUATION POINT ADJUSTABLE, PRESET AND ACTUATION POINT ADJUSTABLE, PRESET |
CTYS | Contact Adjustment Type | EXTERNAL DEACTUATION POINT SCREW AND EXTERNAL ACTUATION POINT SCREW |
CTYM | Contact Adjustment Range | +200.00/+450.00 ACTUATION POINT DEGREES FAHRENHEIT AND +200.00/+450.00 DEACTUATION POINT DEGREES FAHRENHEIT |
CTHF | Contact Load Current Rating | 5.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE |
CTHF | Contact Load Current Rating | 6.0 AMPERES RESISTIVE LOAD SECOND VOLTAGE |
CTYX | Contact Stimulus Rating | 10.00 DIFFERENTIAL POINT NOMINAL DEGREES FAHRENHEIT AND 350.00 ACTUATION POINT NOMINAL DEGREES FAHRENHEIT AND 340.00 DEACTUATION POINT NOMINAL DEGREES FAHRENHEIT |
CTZB | Contact Voltage Rating In Volts | 230.0 AC AT SEA LEVEL FIRST VOLTAGE |
MEDA | Media For Which Designed | GAS OR LIQUID |
CQYJ | Mounting Facility Pattern | ISOSCELES TRIANGLE |
AXGY | Mounting Method | FLANGE AND UNTHREADED HOLE |
CRLD | Nonpile-Up Contact Arrangement | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
AWTN | Operating Temp Rating | -459.4 DEG FAHRENHEIT MINIMUM AND 1500.0 DEG FAHRENHEIT MAXIMUM |
ABHP | Overall Length | 4.906 INCHES NOMINAL |
STYL | Style Designator | CYLINDRICAL W/FLANGE |
AFDS | Longest Horizontal Distance Between Mounting Centers | 1.079 INCHES MINIMUM AND 1.085 INCHES MAXIMUM |
AFDV | Longest Vertical Distance Between Mounting Centers | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
AFDT | Shortest Horizontal Distance Between Mounting Centers | 0.536 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
ADAV | Overall Diameter | 1.750 INCHES NOMINAL |
AEBV | Unthreaded Mounting Hole Diameter | 0.192 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
AKBY | Temp Sensing Element Type | INTERNAL SENSOR |
CSCF | Terminal Type | WIRE LEAD |