Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
8198758 | 3 - Design Control Reference | 2 - Production Item | U S ARMY AVIATION AND MISSILE | 18876 | ![]() |
2536-0001 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
50MS584 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
30379-1 | 5 - Replaced / Discontinued | 2 - Production Item | MICROWAVE DEVICES INC | 60674 | ![]() |
5126 | 5 - Replaced / Discontinued | 2 - Production Item | ITT CORPORATION | 71468 | ![]() |
5126-1 | 5 - Replaced / Discontinued | 2 - Production Item | ITT CORPORATION | 71468 | ![]() |
7694 | 5 - Replaced / Discontinued | 2 - Production Item | ITT CORPORATION | 71468 | ![]() |
28JR124-4 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPECIALTY CONNECTOR CO INC | 24931 | ![]() |
28JR127-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPECIALTY CONNECTOR CO INC | 24931 | ![]() |
2536-0001 | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 | ![]() |
50MS584 | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 | ![]() |
125-9 | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 | ![]() |
1250-0001 | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 | ![]() |
1250-0001MS | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 | ![]() |
31-221-1021 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMPHENOL CORPORATION | 74868 | ![]() |
KC79-32 | 5 - Replaced / Discontinued | 9 - No Longer Used | WINCHESTER ELECTRONICS CORPORATION | 91836 | ![]() |
E1316 | 5 - Replaced / Discontinued | 9 - No Longer Used | WINCHESTER ELECTRONICS CORPORATION | 91836 | ![]() |
125-9 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
125-9 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
125-9 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001 | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001MS | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001MS | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
1250-0001MS | C - Advisory Reference | 1 - Incomplete Part Number | AGILENT TECHNOLOGIES, INC. | 1LQK8 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5935 | 000276759 | A039B0 | 15093 | Y | 4 | 9 | A | P | A | C | 0 | 1 Jan 1963 |
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
Item contains combination of two or more precious metals (silver, gold, platinum).
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Dec 1995 | |||||||||||||||||||||||||||||
ZP01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
WB01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
A918 | A196 | 1 | C | Z | CD | CL | 1 Nov 2005 | |||||||||||||||||||||||
FXGX | FXTX | 1 | C | Z | SX | 1 Nov 2005 | ||||||||||||||||||||||||
N9BN | NIND | 1 | C | Z | GH | HD | KE | 1 Nov 2005 | ||||||||||||||||||||||
S911 | S007 | 1 | C | Z | XN | 1 Nov 2005 | ||||||||||||||||||||||||
YK01 | 1 Jan 2015 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
National Security Agency, ATTN: L111, Fort George G. Meade, MD 20755-6000
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval ICP, Philadelphia, PA 19111
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 5 | TX | D | 8198758 | 18876 | ![]() | ||||
5 | 1 | 5 | ZZ | 2536-0001 | 1LQK8 | ![]() | ||||||
5 | 1 | 5 | ZZ | 50MS584 | 1LQK8 | ![]() | ||||||
5 | 2 | 5 | TX | 30379-1 | 60674 | ![]() | ||||||
5 | 2 | 5 | TX | 5126 | 71468 | ![]() | ||||||
5 | 2 | 5 | TX | 5126-1 | 71468 | ![]() | ||||||
5 | 2 | 5 | TX | 7694 | 71468 | ![]() | ||||||
3 | 5 | 9 | 6 | TU | B | 31-221-1021 | 74868 | ![]() | ||||
3 | 5 | 9 | 3 | TX | D | E1316 | 91836 | ![]() | ||||
3 | 5 | 9 | 3 | TX | D | KC79-32 | 91836 | ![]() | ||||
5 | 9 | A | TX | B | 28JR124-4 | 24931 | ![]() | |||||
3 | 5 | 9 | 5 | TX | B | 28JR127-1 | 24931 | ![]() | ||||
3 | 5 | 9 | 6 | TA | B | 1250-0001MS | 28480 | ![]() | ||||
3 | 5 | 9 | 5 | TX | B | 2536-0001 | 28480 | ![]() | ||||
3 | 5 | 9 | 5 | TX | B | 50MS584 | 28480 | ![]() | ||||
C | 1 | 5 | ZZ | 9X | 125-9 | 1LQK8 | ![]() | |||||
C | 1 | 5 | ZZ | 9X | 1250-0001 | 1LQK8 | ![]() | |||||
C | 1 | 5 | ZZ | 9X | 1250-0001MS | 1LQK8 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
USA
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Sacramento Air Logistics Center, McClellan AFB, CA 95652-5609
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
GIRDER
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | TX | 0 | 22 May 1968 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
658 | Z | 9 | A | H | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions. MARINE CORPS: Item requires special handling/or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. NAVY: Field Activity Control Items
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 41 | 1 | AAA | 0.1 lbs | 0.004 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | FA | 00 | 0 | D1 | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
MIL-P-130, laminated and creped wrapping paper
No requirement
Not Applicable
PPP-B-566 or PPP-B-676, folding or setup box.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AFQK | Distance From Mounting Shoulder To Front Face | 0.428 INCHES NOMINAL |
AGAV | End Item Identification | COLIVER PERRY CLASS FFG; NIMITZ CLASS CVN; KIDD CLASS DDG; FORRESTAL CLASS CV; STURGEON CLASS SSN (637); TICONDEROGA CLASS CG (47); VIRGINIA CLASS CGN (41); SPRUANCE CLASS DD (963); WASP CLASS LHD |
CXCJ | Bushing Accommodation Hole Shape | ROUND W/FLAT |
AFRV | Connector Locking Method | BAYONET PIN |
CQTZ | Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
AFQX | Contact Position Arrangement Style | BNC SINGLE MATING END |
AFQZ | Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CQYH | Contact Surface Treatment | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
CRTL | Criticality Code Justification | FEAT |
AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
AFQW | Mating End Quantity | 1 |
CQJX | Nominal Thread Size | 0.375 INCHES |
ADAV | Overall Diameter | 0.500 INCHES NOMINAL |
PMLC | Precious Material And Location | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
PRMT | Precious Material | GOLD AND SILVER |
CXCL | Included Contact Type | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
CXCG | Included Contact Quantity | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
CQZG | Insert Material | PLASTIC SINGLE MATING END |
PMWT | Precious Material And Weight | 0.005 GOLD GRAINS, TROY AND 0.005 SILVER GRAINS, TROY |
AFRY | Radio Frequency Type Contact Characteristic Impedance In Ohms | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CSPT | Shell Material | COPPER ALLOY |
CSWM | Shell Surface Treatment | NICKEL |
AFRT | Shell Type | SOLID |
ABHP | Overall Length | 0.916 INCHES NOMINAL |
FEAT | Special Features | WEAPON SYSTEM ESSENTIAL |
CQTM | Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
CSCF | Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
AAJD | Thread Class | 2A |
AAJF | Thread Direction | RIGHT-HAND |
CMLP | Thread Quantity Per Inch | 32 |
THSD | Thread Series Designator | UNEF |
AFQR | Threaded Device Type | MOUNTING BUSHING |