Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
9976329-3 | 3 - Design Control Reference | 2 - Production Item | U S ARMY AVIATION AND MISSILE | 18876 | |
GSP2-20-27PSFX1 | 5 - Replaced / Discontinued | 2 - Production Item | GLASSEAL PRODUCTS INC | 10025 | |
GS17049-392 | 5 - Replaced / Discontinued | 2 - Production Item | ITT CORPORATION | 71468 | |
172-320-27P4X | 5 - Replaced / Discontinued | 9 - No Longer Used | AMPHENOL CORP | 02660 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5935 | 000517998 | A039B0 | 15093 | X | K | A | P | A | U | 18 May 1967 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Dec 1995 | |||||||||||||||||||||||||||||
DGX1 | DTX1 | 3 | C | TX | 1 Nov 2005 | |||||||||||||||||||||||||
ZR01 | 1 Dec 2007 | |||||||||||||||||||||||||||||
ZU01 | 1 Mar 2008 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Defense Supply Center Columbus, Columbus, OH 43218
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 1 | TX | D | 9976329-3 | 18876 | |||||
4 | 5 | 2 | 5 | TX | D | GS17049-392 | 71468 | |||||
5 | 2 | 5 | TX | GSP2-20-27PSFX1 | 10025 | |||||||
3 | 5 | 9 | 6 | TX | B | 172-320-27P4X | 02660 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | TX | 0 | 28 Nov 1967 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 658 | Z | 9 | A | H | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
Defense Supply Center Columbus, Columbus, OH 43218
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 41 | 1 | AAA | 0.3 lbs | 0.039 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | FA | 00 | 0 | D1 | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
MIL-P-130, laminated and creped wrapping paper
No requirement
Not Applicable
PPP-B-566 or PPP-B-676, folding or setup box.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AFQK | Distance From Mounting Shoulder To Front Face | 0.824 INCHES NOMINAL |
AEBW | Center To Center Distance Between Mounting Facilities Parallel To Height | 1.156 INCHES NOMINAL |
AFRV | Connector Locking Method | EXTERNALLY THREADED SHELL |
CQTZ | Contact Material | NICKEL ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
AFRD | Contact Maximum Ac Voltage Rating In Volts | 200.0 SINGLE MATING END 1ST CONTACT GROUPING |
AFRD | Contact Maximum Ac Voltage Rating In Volts | 500.0 SINGLE MATING END 2ND CONTACT GROUPING |
AFRC | Contact Maximum Current Rating In Amps | 22.0 SINGLE MATING END ALL CONTACT GROUPINGS |
AFQZ | Contact Removability | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
AFRE | Contact Maximum Dc Voltage Rating In Volts | 250.0 SINGLE MATING END 1ST CONTACT GROUPING |
AFRE | Contact Maximum Dc Voltage Rating In Volts | 700.0 SINGLE MATING END 2ND CONTACT GROUPING |
AFQX | Contact Position Arrangement Style | 20-27 SINGLE MATING END |
CRBJ | Contact Surface Treatment Document And Classification | MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
CQYH | Contact Surface Treatment | TIN SINGLE MATING END ALL CONTACT GROUPINGS |
AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 1.156 INCHES NOMINAL |
ADZC | Environmental Protection | SALT WATER RESISTANT AND VIBRATION RESISTANT |
AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
AFQW | Mating End Quantity | 1 |
CQJX | Nominal Thread Size | 1.250 INCHES |
CXCG | Included Contact Quantity | 6 SINGLE MATING END 2ND CONTACT GROUPING |
CXCG | Included Contact Quantity | 8 SINGLE MATING END 1ST CONTACT GROUPING |
CXCL | Included Contact Type | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
CQZG | Insert Material | CERAMIC SINGLE MATING END |
AFRP | Insert Position In Deg | 110.0 |
AFRN | Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
CTBC | Shell Surface Treatment Document And Classification | MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
CSPT | Shell Material | STEEL |
CSWM | Shell Surface Treatment | TIN |
AFRT | Shell Type | SOLID |
ABKW | Overall Height | 1.500 INCHES NOMINAL |
ABHP | Overall Length | 0.906 INCHES NOMINAL |
ABMK | Overall Width | 1.500 INCHES NOMINAL |
FEAT | Special Features | HERMETIC SEALED |
AEBV | Unthreaded Mounting Hole Diameter | 0.120 INCHES NOMINAL |
ZZZK | Specification/Standard Data | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION |
CQTM | Terminal Location | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
CSCF | Terminal Type | TAB, SOLDER LUG SINGLE MATING END ALL CONTACT GROUPINGS |
TEST | Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
AAJD | Thread Class | 2A |
AAJF | Thread Direction | RIGHT-HAND |
THSD | Thread Series Designator | UNEF |
AFQR | Threaded Device Type | COUPLING FACILITY |