Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS3102A28-12P | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | ![]() |
357-3000-00 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | ROCKWELL COLLINS, INC. | 13499 | ![]() |
357-3000-000 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | ROCKWELL COLLINS, INC. | 95105 | ![]() |
AN3102A28-12P | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | CURTISS-WRIGHT CONTROLS, INC | 0AHP5 | ![]() |
12Z7105-548 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5935 | 001492671 | A039B0 | 15093 | X | 1 | A | P | S | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Item contains silver.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZA01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
YF01 | 1 Nov 2015 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 1 | 5 | TX | 357-3000-000 | 95105 | ![]() | ||||||
3 | 5 | 2 | 5 | ZF | D | 12Z7105-548 | 10001 | ![]() |
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
France
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | TX | 1 | B | TX | 0 | 13 Jul 1991 | 5935012052911 | 8 Oct 1965 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Columbus, Columbus, OH 43218
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
A new item authorized for procurement, contained in a new or revised superseding specification or standard, that replaces prior items.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
723 | Z | 9 | A | H | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
Radio Parts, Batteries and Equipment, excluding Tubes Packed separately
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Defense Logistics Agency
Department of the Navy
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AFQK | Distance From Mounting Shoulder To Front Face | 0.750 INCHES NOMINAL |
CXCJ | Bushing Accommodation Hole Shape | ROUND |
AEBW | Center To Center Distance Between Mounting Facilities Parallel To Height | 1.562 INCHES NOMINAL |
AFRV | Connector Locking Method | EXTERNALLY THREADED SHELL |
CQTZ | Contact Material | COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
AFRD | Contact Maximum Ac Voltage Rating In Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
AFRC | Contact Maximum Current Rating In Amps | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
AFQZ | Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
AFRE | Contact Maximum Dc Voltage Rating In Volts | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
AFQX | Contact Position Arrangement Style | 28-12 SINGLE MATING END |
CQYH | Contact Surface Treatment | SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 1.562 INCHES NOMINAL |
AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
AFQW | Mating End Quantity | 1 |
AKMG | Nominal Thread Length | 0.625 INCHES |
CQJX | Nominal Thread Size | 1.750 INCHES |
CXCG | Included Contact Quantity | 26 SINGLE MATING END SINGLE CONTACT GROUPING |
CXCL | Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
AFRP | Insert Position In Deg | 0.0 |
AFRN | Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
PMLC | Precious Material And Location | CONTACT SURFACES SILVER |
PMWT | Precious Material And Weight | 0.026 SILVER GRAINS, TROY |
PRMT | Precious Material | SILVER |
CSPT | Shell Material | ALUMINUM ALLOY |
CSWM | Shell Surface Treatment | ANODIZE |
AFRT | Shell Type | SOLID |
ABKW | Overall Height | 2.000 INCHES NOMINAL |
ABHP | Overall Length | 1.875 INCHES NOMINAL |
ABMK | Overall Width | 2.000 INCHES NOMINAL |
AEBV | Unthreaded Mounting Hole Diameter | 0.147 INCHES NOMINAL |
CQTM | Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
CSCF | Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
AAJD | Thread Class | 2A |
AAJF | Thread Direction | RIGHT-HAND |
THSD | Thread Series Designator | UNS |
CMLP | Thread Quantity Per Inch | 18 |
AFQR | Threaded Device Type | HUB |