Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
788C548H22 | 3 - Design Control Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 97942 | |
SMA-024-8002 | 5 - Replaced / Discontinued | 2 - Production Item | EMERSON NETWORK POWER CONNECTIVITY | 34078 | |
908344-4 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 82577 | |
189006-1 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 37695 | |
2991-6002 | 5 - Replaced / Discontinued | 2 - Production Item | SV MICROWAVE, INC | 95077 | |
50-675-7000-31 | 5 - Replaced / Discontinued | 2 - Production Item | ITT CANNON RF PRODUCTS | 98291 | |
1326-000-G678 | 5 - Replaced / Discontinued | 2 - Production Item | SEMIC RF ELECTRONIC GMBH | DG438 | |
TRU-7172 | 5 - Replaced / Discontinued | 2 - Production Item | TRU CORPORATION | 92180 | |
G350325-1 | 5 - Replaced / Discontinued | 2 - Production Item | EXELIS INC. | 24930 | |
247AS-C0138-001 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL AIR SYSTEMS COMMAND | 30003 | |
2604795-1 | 5 - Replaced / Discontinued | 2 - Production Item | ALLIANT TECHSYSTEMS OPERATIONS LLC | 06424 | |
508/4/25613/200 | 5 - Replaced / Discontinued | 2 - Production Item | BAE SYSTEMS DEFENCE SYSTEMS LTD | U2982 | |
99055723 | 5 - Replaced / Discontinued | 2 - Production Item | THALES | F6481 | |
154777-4 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON TECHNICAL SERVICES COMPANY | 3B150 | |
MDC-91001-1 | 5 - Replaced / Discontinued | 2 - Production Item | DAL-TECH DEVICES, INC. | 52335 | |
33-71000-000 | 5 - Replaced / Discontinued | 2 - Production Item | AUTOMATIC CONNECTOR | 94375 | |
7431 | 5 - Replaced / Discontinued | 2 - Production Item | AUTOMATIC CONNECTOR | 94375 | |
1326000G678-000 | 5 - Replaced / Discontinued | 2 - Production Item | DELTA ELECTRONICS MFG CORP | 00795 | |
154777-4 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 54X10 | |
253976-001 | 5 - Replaced / Discontinued | 9 - No Longer Used | WATKINS-JOHNSON CO | 14482 | |
E-3361-000-000 | 5 - Replaced / Discontinued | 9 - No Longer Used | AUTOMATIC CONNECTOR | 94375 | |
154777-4 | 5 - Replaced / Discontinued | 9 - No Longer Used | RAYTHEON COMPANY | 49956 | |
1326-000-G678 | 5 - Replaced / Discontinued | 9 - No Longer Used | DELTA ELECTRONICS MFG CORP | 00795 | |
M420413 | 5 - Replaced / Discontinued | 9 - No Longer Used | CONDOR SYSTEMS INC | 8J967 | |
879-12-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | WINCHESTER ELECTRONICS CORPORATION | 91836 | |
73-1235853-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL DYNAMICS ADVANCED | 07397 | |
688C548H22 | 5 - Replaced / Discontinued | 9 - No Longer Used | NORTHROP GRUMMAN SYSTEMS CORPORATION | 97942 | |
0SM208 | 5 - Replaced / Discontinued | 9 - No Longer Used | TYCO ELECTRONICS CORP | 26805 | |
208A | 5 - Replaced / Discontinued | 9 - No Longer Used | TYCO ELECTRONICS CORP | 26805 | |
2084-1100-31 | 5 - Replaced / Discontinued | 9 - No Longer Used | TYCO ELECTRONICS CORP | 26805 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5935 | 004456401 | A039B0 | 15091 | X | 1 | A | P | A | G | 30 Dec 1970 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
Item contains gold.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
FXGX | FXTX | 1 | C | Z | SX | 1 Nov 2005 | ||||||||||||||||||||||||
MC49 | MC13 | 1 | C | Z | PA | 1 Nov 2005 | ||||||||||||||||||||||||
BGX1 | 1 | C | 1 Jan 2008 | |||||||||||||||||||||||||||
A918 | 1 | C | Z | CL | CL | 1 Mar 2013 | ||||||||||||||||||||||||
N9BN | 1 | C | Z | GH | GG | GT | 1 Dec 2013 | |||||||||||||||||||||||
YF01 | 1 May 2015 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Marine Corps Logistics Base, Albany, GA 31704-1128
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Philadelphia, PA 19111û5098
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | TX | 788C548H22 | 97942 | |||||||
4 | 5 | 2 | 5 | TX | D | 50-675-7000-31 | 98291 | |||||
4 | 5 | 2 | 3 | ZG | A | 1326-000-G678 | DG438 | |||||
4 | 5 | 2 | 4 | ZF | B | 99055723 | F6481 | |||||
1 | 5 | 2 | 4 | ZK | D | 508/4/25613/200 | U2982 | |||||
5 | 2 | 5 | ZZ | 154777-4 | 54X10 | |||||||
5 | 2 | A | TX | TRU-7172 | 92180 | |||||||
5 | 2 | 5 | TX | 33-71000-000 | 94375 | |||||||
1 | 5 | 2 | 6 | TX | D | 7431 | 94375 | |||||
5 | 2 | 5 | TX | 2991-6002 | 95077 | |||||||
5 | 2 | 5 | ZZ | 1326000G678-000 | 00795 | |||||||
3 | 5 | 2 | 1 | TX | D | 2604795-1 | 06424 | |||||
4 | 5 | 2 | 5 | TX | D | G350325-1 | 24930 | |||||
1 | 5 | 2 | A | TX | D | 247AS-C0138-001 | 30003 | |||||
5 | 2 | A | TX | SMA-024-8002 | 34078 | |||||||
3 | 5 | 2 | 5 | TX | D | 189006-1 | 37695 | |||||
5 | 2 | 1 | TX | 154777-4 | 3B150 | |||||||
5 | 2 | 5 | TX | MDC-91001-1 | 52335 | |||||||
5 | 2 | 5 | TX | 908344-4 | 82577 | |||||||
5 | 9 | 1 | TX | B | M420413 | 8J967 | ||||||
5 | 9 | 1 | TX | 879-12-1 | 91836 | |||||||
1 | 5 | 9 | 1 | TX | B | 154777-4 | 49956 | |||||
1 | 5 | 9 | A | TX | B | 0SM208 | 26805 | |||||
4 | 5 | 9 | 6 | 9Z | B | 2084-1100-31 | 26805 | |||||
1 | 5 | 9 | 6 | TX | B | 208A | 26805 | |||||
5 | 9 | 1 | TX | 73-1235853-2 | 07397 | |||||||
4 | 5 | 9 | 5 | TX | B | 253976-001 | 14482 | |||||
3 | 5 | 9 | 5 | TX | B | 688C548H22 | 97942 | |||||
5 | 9 | 1 | TX | B | 1326-000-G678 | 00795 | ||||||
4 | 5 | 9 | 3 | KE | B | E-3361-000-000 | 94375 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Germany
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
France
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
United Kingdom
USA
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
DLIS-K, Battle Creek, MI 49037-3084
Naval ICP, Philadelphia, PA 19111
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | TX | 0 | 4 Feb 2005 |
An item authorized for procurement that has not yet been subject to item standardization.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 658 | Z | 9 | A | H | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
Defense Supply Center Columbus, Columbus, OH 43218
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | Z | U | 1 | A | EA | 0 | |
DF | SMS | Z | U | 1 | N | EA | 0 | |
DM | SMS | Z | U | 1 | Z | EA | 0 | |
DN | SMS | Z | U | 1 | EA | 0 | ||
DS | SMS | Z | U | 1 | N | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions. MARINE CORPS: Item requires special handling/or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. NAVY: Field Activity Control Items
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 41 | 1 | AAA | 0.2 lbs | 0.002 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | NA | X | D3 | 00 | Q | Q | U | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
No requirement
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
As required to protect the item or elements of the package
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AFQK | Distance From Mounting Shoulder To Front Face | 0.555 INCHES NOMINAL |
AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
CXCJ | Bushing Accommodation Hole Shape | ROUND W/FLAT |
AFRV | Connector Locking Method | EXTERNALLY THREADED SHELL |
CQTZ | Contact Material | COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
AFRD | Contact Maximum Ac Voltage Rating In Volts | 500.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
AFQX | Contact Position Arrangement Style | NONSTD ALL MATING ENDS |
AFQZ | Contact Removability | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
AFRF | Contact Maximum Frequency Rating | 18000.0 MEGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING |
CRBJ | Contact Surface Treatment Document And Classification | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
CQYH | Contact Surface Treatment | GOLD ALL MATING ENDS SINGLE CONTACT GROUPING |
ADZC | Environmental Protection | PRESSURE PROOF AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
AFQW | Mating End Quantity | 2 |
AFQQ | Mounting Facility Thickness | 0.190 INCHES MAXIMUM |
CQJX | Nominal Thread Size | 0.250 INCHES AND 0.312 INCHES |
CXCL | Included Contact Type | COAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING |
CXCG | Included Contact Quantity | 1 ALL MATING ENDS SINGLE CONTACT GROUPING |
CQZG | Insert Material | PLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS |
PMLC | Precious Material And Location | CONTACT SURFACE AND SHELL SURFACE GOLD |
PRMT | Precious Material | GOLD |
PMWT | Precious Material And Weight | 0.110 GOLD GRAINS, TROY |
AFRY | Radio Frequency Type Contact Characteristic Impedance In Ohms | 50.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
CTBC | Shell Surface Treatment Document And Classification | MIL-G-45204,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
CTHH | Shell Material Document And Classification | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
CSPT | Shell Material | STEEL COMP 303 |
CSWM | Shell Surface Treatment | GOLD |
AFRT | Shell Type | SOLID |
ADAV | Overall Diameter | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
ABHP | Overall Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
AAJD | Thread Class | 2A AND 2A |
AAJF | Thread Direction | RIGHT-HAND AND RIGHT-HAND |
CMLP | Thread Quantity Per Inch | 36 |
THSD | Thread Series Designator | UNS AND UNEF |
AFQR | Threaded Device Type | COUPLING FACILITY AND MOUNTING BUSHING |