5935-00-879-8000
CONNECTOR,PLUG,ELECTRICAL
5935-00-879-8000 (5935008798000, 008798000)
Part Numbers (4 listings): MS3108E24-21S | MIL-C-5015 | MS3108R24-21S | MS3108R24-21SC |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS3108E24-21S | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| MIL-C-5015 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 |  |
| MS3108R24-21S | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY STANDARDS | 96906 | |
| MS3108R24-21SC | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY STANDARDS | 96906 | |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5935 | 008798000 | A039B0 | 01938 | X | 1 | A | P | A | G | 1 Jan 1962 |
A039B0
Federal Item Identification Guide (FIIG_4065)
01938
Item Naming Code (INC_4080)
1 Jan 1962
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Electrostatic Discharge Code (ESD_EMI_CD_2043)
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
G
Precious Metals Indicator Code (PMIC_0802)
Item contains gold.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YA | ||||||||||||||||||||||||||||||
| ZZ | ||||||||||||||||||||||||||||||
| YA01 | 1 Oct 2000 | |||||||||||||||||||||||||||||
| N9BN | 1 | T | Z | GH | HD | 1 Nov 2005 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
T
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2 | E | TX | MS3108E24-21S | 96906 | | ||||||
| 4 | 1 | E | TX | MIL-C-5015 | 81349 | | ||||||
| 3 | 5 | 9 | E | TX | B | MS3108R24-21S | 96906 | | ||||
| 3 | 5 | 9 | E | TX | B | MS3108R24-21SC | 96906 | | ||||
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
4
Reference Number Category Code (RNCC_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 671 | Z | 9 | A | A | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
671
Water Commodity Code (WRT_CMDTY_CD_9275)
Aircraft Parts, To include Test/Tool Sets and Equipment (other than armament systems)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
A
Air Commodity Code (AIR_CMTY_HDLG_9215)
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
061680
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34570
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-WIRING-PLUGS-ETC
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKEZ | Distance From Centerline To Connector End | 2.634 INCHES NOMINAL |
| AKFA | Distance From Centerline To Cable End | 2.125 INCHES MAXIMUM |
| ADMW | Body Angle In Deg | 90.0 |
| AFRV | Connector Locking Method | INTERNALLY THREADED COUPLING RING |
| CQTZ | Contact Material | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| AFRD | Contact Maximum Ac Voltage Rating In Volts | 900.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| AFQX | Contact Position Arrangement Style | 24-21 SINGLE MATING END |
| AFQZ | Contact Removability | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| AFRC | Contact Maximum Current Rating In Amps | 22.0 SINGLE MATING END 2ND CONTACT GROUPING |
| AFRC | Contact Maximum Current Rating In Amps | 73.0 SINGLE MATING END 1ST CONTACT GROUPING |
| AFRE | Contact Maximum Dc Voltage Rating In Volts | 1250.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CRBJ | Contact Surface Treatment Document And Classification | MIL-G-45204,TY 1,GRADE B MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END 2ND CONTACT GROUPING AND QQ-N-290,CL 1,GRADE B FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END 2ND CONTACT GROUPING |
| CRBJ | Contact Surface Treatment Document And Classification | QQS-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END 1ST CONTACT GROUPING |
| CQYH | Contact Surface Treatment | GOLD SINGLE MATING END 2ND CONTACT GROUPING AND NICKEL SINGLE MATING END 2ND CONTACT GROUPING |
| CQYH | Contact Surface Treatment | SILVER SINGLE MATING END 1ST CONTACT GROUPING |
| ADZC | Environmental Protection | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| CBBL | Features Provided | PRE-TINNED TERMINAL |
| AAQL | Body Style | ANGLE SHAPE, W/O CABLE CLAMP |
| AFQW | Mating End Quantity | 1 |
| CQJX | Nominal Thread Size | 1.438 INCHES AND 1.500 INCHES |
| AKMG | Nominal Thread Length | 0.290 INCHES AND 0.664 INCHES |
| AWTN | Operating Temp Rating | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CXCG | Included Contact Quantity | 9 SINGLE MATING END 2ND CONTACT GROUPING |
| CXCL | Included Contact Type | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG | Included Contact Quantity | 1 SINGLE MATING END 1ST CONTACT GROUPING |
| CQZG | Insert Material | RUBBER SINGLE MATING END |
| AFRP | Insert Position In Deg | 0.0 |
| AFRN | Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
| PMLC | Precious Material And Location | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| PMWT | Precious Material And Weight | 0.009 GOLD GRAINS, TROY AND 0.005 SILVER GRAINS, TROY |
| PRMT | Precious Material | GOLD AND SILVER |
| CTBC | Shell Surface Treatment Document And Classification | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| CSPT | Shell Material | ALUMINUM ALLOY |
| CSWM | Shell Surface Treatment | CADMIUM AND CHROMATE |
| AFRT | Shell Type | SOLID |
| ADAV | Overall Diameter | 2.170 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 96906-MS3108 GOVERNMENT STANDARD |
| CQTM | Terminal Location | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| CSCF | Terminal Type | SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| TEST | Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| AAJD | Thread Class | 2A AND 2B |
| AAJF | Thread Direction | RIGHT-HAND AND RIGHT-HAND |
| THSD | Thread Series Designator | UNEF AND UNEF |
| CMLP | Thread Quantity Per Inch | 18 AND 18 |
| AFQR | Threaded Device Type | BACK SHELL AND COUPLING FACILITY |
Back to TopBack to Top
