5935-01-038-2617
CONNECTOR,RECEPTACLE,ELECTRICAL
5935-01-038-2617 (5935010382617, 010382617)
Part Numbers (2 listings): MS3100F24-28P | MILC5015 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS3100F24-28P | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| MILC5015 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5935 | 010382617 | A039B0 | 15093 | X | 1 | A | P | G | 2 Apr 1977 |
A039B0
Federal Item Identification Guide (FIIG_4065)
15093
Item Naming Code (INC_4080)
2 Apr 1977
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
G
Precious Metals Indicator Code (PMIC_0802)
Item contains gold.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 2 | 2 | 3 | TX | D | MS3100F24-28P | 96906 | | ||||
| 1 | 4 | 1 | 3 | TX | D | MILC5015 | 81349 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
4
Reference Number Category Code (RNCC_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| E | TX | 1 | B | TX | 0 | 1 May 1985 | 5935010961302 | 27 Apr 1985 |
E
Item Standardization Code (ISC_2650)
An item no longer authorized for procurement which has been replaced by an item contained in a new or revised superseding specification or standard.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
1
NIIN Status Code (NIIN_STAT_CD_2670)
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
B
Replaced / Replacement Item Standardization Code (ISC_2650)
A new item authorized for procurement, contained in a new or revised superseding specification or standard, that replaces prior items.
0
Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 May 1985
Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)
5935-01-096-1302
Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)
27 Apr 1985
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TX |
TX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43218
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFQK | Distance From Mounting Shoulder To Front Face | 0.812 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| AEBW | Center To Center Distance Between Mounting Facilities Parallel To Height | 1.375 INCHES NOMINAL |
| AFRW | Connector Cable Strain Relief Method | CABLE CLAMP |
| AFRV | Connector Locking Method | EXTERNALLY THREADED SHELL |
| AFRD | Contact Maximum Ac Voltage Rating In Volts | 200.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX | Contact Position Arrangement Style | 24-28 SINGLE MATING END |
| AFQZ | Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC | Contact Maximum Current Rating In Amps | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRE | Contact Maximum Dc Voltage Rating In Volts | 250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | Contact Surface Treatment | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 1.375 INCHES NOMINAL |
| ADZC | Environmental Protection | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT |
| AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| AFQW | Mating End Quantity | 1 |
| AKMG | Nominal Thread Length | 0.625 INCHES |
| CQJX | Nominal Thread Size | 1.500 INCHES |
| CXCG | Included Contact Quantity | 24 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | Insert Material | RUBBER SINGLE MATING END |
| AFRP | Insert Position In Deg | 0.0 |
| AFRN | Polarization Method | KEY, MULTIPLE KEY GROOVE |
| PMLC | Precious Material And Location | CONTACT SURFACES GOLD |
| PMWT | Precious Material And Weight | 0.024 GOLD GRAINS, TROY |
| PRMT | Precious Material | GOLD |
| CSPT | Shell Material | ALUMINUM ALLOY |
| CSWM | Shell Surface Treatment | CADMIUM |
| AFRT | Shell Type | SOLID |
| CTBC | Shell Surface Treatment Document And Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| ABKW | Overall Height | 1.750 INCHES NOMINAL |
| ABHP | Overall Length | 2.969 INCHES MAXIMUM |
| ABMK | Overall Width | 1.750 INCHES NOMINAL |
| AEBV | Unthreaded Mounting Hole Diameter | 0.142 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION |
| CQTM | Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST | Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| AAJD | Thread Class | 2A |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNEF |
| AFQR | Threaded Device Type | COUPLING FACILITY |
Back to TopBack to Top
