Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
G205613-11 | 3 - Design Control Reference | 2 - Production Item | O. C. KECKLEY COMPANY | 32869 | ![]() |
410 GP 12 | 3 - Design Control Reference | 2 - Production Item | MARATHON SPECIAL PRODUCTS | 26405 | ![]() |
NA-0370-12 | 5 - Replaced / Discontinued | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 56232 | ![]() |
1675105-12 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 | ![]() |
12-172G | 5 - Replaced / Discontinued | 2 - Production Item | CINCH CONNECTORS, INC. | 71785 | ![]() |
12-172GC | 5 - Replaced / Discontinued | 2 - Production Item | CINCH CONNECTORS, INC. | 71785 | ![]() |
G205613-11 | 5 - Replaced / Discontinued | 9 - No Longer Used | CINCH CONNECTORS, INC. | 71785 | ![]() |
410-12 | 5 - Replaced / Discontinued | 9 - No Longer Used | DIALIGHT CORPORATION | 83330 | ![]() |
410-12B | 5 - Replaced / Discontinued | 9 - No Longer Used | DIALIGHT CORPORATION | 83330 | ![]() |
G205613-11 | 5 - Replaced / Discontinued | 9 - No Longer Used | AT AND T CORP | 70408 | ![]() |
G205613-11 | 5 - Replaced / Discontinued | 9 - No Longer Used | LUCENT TECHNOLOGIES INC | 01714 | ![]() |
410-12 | 5 - Replaced / Discontinued | 9 - No Longer Used | MARATHON SPECIAL PRODUCTS | 26405 | ![]() |
410-12B | 5 - Replaced / Discontinued | 9 - No Longer Used | MARATHON SPECIAL PRODUCTS | 26405 | ![]() |
G205613-11 | 5 - Replaced / Discontinued | 9 - No Longer Used | WHEELABRATOR-FRYE INC | 05463 | ![]() |
12-172 | C - Advisory Reference | 1 - Incomplete Part Number | CINCH CONNECTORS, INC. | 71785 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5940 | 002722905 | A011B0 | 00404 | X | 1 | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Oct 2009 | |||||||||||||||||||||||||||||
YA01 | 1 Mar 2010 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | ZZ | 410 GP 12 | 26405 | ![]() | ||||||
3 | 2 | 5 | CX | G205613-11 | 32869 | ![]() | ||||||
5 | 2 | A | CX | NA-0370-12 | 56232 | ![]() | ||||||
5 | 2 | A | CX | 1675105-12 | 80064 | ![]() | ||||||
5 | 9 | 5 | CX | B | 410-12 | 83330 | ![]() | |||||
5 | 9 | 5 | CX | B | 410-12B | 83330 | ![]() | |||||
5 | 9 | 5 | CX | B | G205613-11 | 71785 | ![]() | |||||
3 | 5 | 9 | X | TX | B | G205613-11 | 70408 | ![]() | ||||
5 | 9 | 5 | CX | 410-12 | 26405 | ![]() | ||||||
5 | 9 | 5 | CX | B | 410-12B | 26405 | ![]() | |||||
3 | 5 | 9 | 5 | CX | B | G205613-11 | 01714 | ![]() | ||||
5 | 9 | 5 | TX | B | G205613-11 | 05463 | ![]() | |||||
C | 1 | 4 | TU | AB | 12-172 | 71785 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Defense Supply Center Richmond, Richmond, VA 23297-5000
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
DAC not known. Found on U.S. NSNs that were assigned before 1975. Cannot be used for new item assignment, or any maintenance action on older NSNs.
Defense Supply Center Columbus, Columbus, OH 43218
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
Air Force
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | CX | 1 | 1 | CX | 0 | 28 Dec 1975 | 5940009493133 | 18 Feb 1989 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
72D | Z | 9 | A | H | Z | W | 061045 | Z | 34580 | BOARDS-PRINTED-CIRCUIT-ELEC |
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Navy
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
MATT | Material | PLASTIC BOARD |
MATT | Material | COPPER ALLOY TERMINALS |
SFTT | Surface Treatment | TIN TERMINALS |
AAQL | Body Style | BARRIER TYPE |
ABGN | Board Overall Length | 3.500 INCHES |
ABGP | Board Overall Width | 0.625 INCHES |
ABGQ | Board Overall Height | 0.312 INCHES |
ABGR | Board Height Excluding Terminals | 0.312 INCHES |
ABGS | Base Thickness | 0.219 INCHES |
CWLG | Terminal Pattern Arrangement | MULTI-ROW |
ABCS | Terminal Row Quantity | 2 |
ABCU | Distance Between Terminal Row Centers | 0.250 INCHES |
ABCT | Center To Center Distance Between Terminals | 0.250 INCHES |
CWLN | Terminal Design | LINKED NONFEEDTHRU |
CRNL | Nonfeedthru Terminal Type | 857 SINGLE |
CSCS | Nonfeedthru Terminal Quantity | 12 SINGLE |
CSCR | Terminal Connecting Link Type | 1 SINGLE |
CQCZ | Terminal Connecting Link Quantity | 12 SINGLE |
ABCX | Board Construction | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
ABDU | Center To Center Distance Between Mounting Facilities Parallel To Length | 3.250 INCHES |
ABDV | Center To Center Distance Between Mounting Facilities Parallel To Width | 0.250 INCHES |
ABDW | Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole | 0.188 INCHES |
ABDX | Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility | 0.125 INCHES |
AAMA | Mounting Hole Diameter | 0.125 INCHES |
AMPS | Current Rating In Amps | 5.0 |
AAPB | Dielectric Withstanding Voltage In Volts | 3.0 |