5950-00-005-8904
TRANSFORMER,POWER
5950-00-005-8904 (5950000058904, 000058904)
Part Numbers (3 listings): 3184670 | E-291 | 42731 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 3184670 | 3 - Design Control Reference | 9 - No Longer Used | ALLIED-SIGNAL INC | 77068 |  |
| E-291 | 5 - Replaced / Discontinued | 2 - Production Item | PAYNE MAGNETICS, INC. | 09798 |  |
| 42731 | 5 - Replaced / Discontinued | 2 - Production Item | COAST/ADVANCED CHIP MAGNETICS, INC. | 22558 |  |
| 3184670 | C - Advisory Reference | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 59364 |  |
| 3184670 | C - Advisory Reference | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 59364 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5950 | 000058904 | A058B0 | 32496 | X | 1 | A | P | U | 16 Jun 1972 |
A058B0
Federal Item Identification Guide (FIIG_4065)
32496
Item Naming Code (INC_4080)
16 Jun 1972
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
| ZU01 | 1 Jul 2005 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| N9BN | N9ND | 1 | C | Z | GH | KE | 1 Jun 2006 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 9 | A | TX | D | 3184670 | 77068 | | ||||
| 5 | 2 | 5 | TX | E-291 | 09798 | | ||||||
| 5 | 2 | 5 | TX | 42731 | 22558 | | ||||||
| C | 1 | 5 | ZZ | 9F | 3184670 | 59364 | | |||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 24 Jun 1972 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
24 Jun 1972
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TX | 595 | Z | 9 | A | H | Z | W | 063420 | Z | 35355 | TRANSFORMERS-NOI-OR-TRANSFORMER-PAR |
TX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43218
595
Water Commodity Code (WRT_CMDTY_CD_9275)
Transformer, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
063420
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
35355
Uniform Freight Classification (UFC_CD_MODF_3040)
TRANSFORMERS-NOI-OR-TRANSFORMER-PAR
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.3 lbs | 0.017 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | X | D3 | DO | 00 | Q | Q | U | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.3 lbs
Unit Pack Weight (UP_WT_5153)
0.017 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ADAU | Body Height | 1.250 INCHES MAXIMUM |
| ADAQ | Body Length | 1.500 INCHES MAXIMUM |
| ADAT | Body Width | 1.250 INCHES MAXIMUM |
| AEJN | Distance Between Mounting Facility Centers | 1.650 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 1.850 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| ACZB | Frequency Rating | 400.0 HERTZ NOMINAL SINGLE COMPONENT |
| AEHZ | Maximum Operating Temp | 130.0 DEG CELSIUS |
| AKPV | Mounting Facility Quantity | 2 SINGLE GROUP |
| ABTB | Mounting Hole Diameter | 0.120 INCHES MINIMUM SINGLE GROUP AND 0.140 INCHES MAXIMUM SINGLE GROUP |
| AXGY | Mounting Method | FLANGE SINGLE GROUP AND UNTHREADED HOLE SINGLE GROUP |
| AKNA | Inclosure Type | FULLY INCLOSED |
| ACZC | Input-Output Phase Relationship | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| AARG | Reliability Indicator | NOT ESTABLISHED |
| BPLC | Winding Function And Quantity | 1 PRIMARY SINGLE COMPONENT AND 4 SECONDARY SINGLE COMPONENT |
| CWJS | Winding Operating Voltage | 158.00 AC VOLTS NOMINAL SINGLE COMPONENT 4TH SECONDARY |
| CWJS | Winding Operating Voltage | 115.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| CWJS | Winding Operating Voltage | 19.20 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY |
| CWJS | Winding Operating Voltage | 32.00 AC VOLTS NOMINAL SINGLE COMPONENT 2ND SECONDARY |
| CWJS | Winding Operating Voltage | 94.00 AC VOLTS NOMINAL SINGLE COMPONENT 3RD SECONDARY |
| CRMJ | Winding Power Rating | 1.3 WATTS SINGLE COMPONENT 3RD SECONDARY |
| CRMJ | Winding Power Rating | 2.8 WATTS SINGLE COMPONENT 1ST SECONDARY |
| CRMJ | Winding Power Rating | 4.4 WATTS SINGLE COMPONENT 2ND SECONDARY |
| CRMJ | Winding Power Rating | 550.0 MILLIWATTS SINGLE COMPONENT 4TH SECONDARY |
| TTQY | Terminal Type And Quantity | 14 WIRE LEAD |
Back to TopBack to Top
