Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
556-3500-09-00-00 | 3 - Design Control Reference | 9 - No Longer Used | INTERCONNECTION PRODUCTS INC | 71279 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5950 | 011082595 | A058B0 | 06338 | X | 4 | 9 | A | P | U | 24 Feb 1981 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZA01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4 | 3 | 9 | 4 | 9Z | D | 556-3500-09-00-00 | 71279 | ![]() |
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
DLIS-K, Battle Creek, MI 49037-3084
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 24 Feb 1981 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZA | P | 595 | Z | 9 | A | H | Z | W | 063420 | Z | 35355 | TRANSFORMERS-NOI-OR-TRANSFORMER-PAR |
Australia
77.5
Transformer, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ACZP | Coil Form Type | SOLID SINGLE COMPONENT |
ACZR | Core Construction | POWDERED SINGLE COMPONENT |
CRGS | Dc Resistance Rating In Ohms | 0.090 SINGLE COMPONENT SINGLE WINDING |
AXGY | Mounting Method | THREADED BUSHING SINGLE GROUP |
CQJX | Nominal Thread Size | 0.112 INCHES SINGLE GROUP |
AKNA | Inclosure Type | FULLY INCLOSED |
ACYV | Inductance Rating | 0.417 MICROHENRIES MINIMUM SINGLE COMPONENT SINGLE WINDING AND 0.504 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING |
CRHJ | Quality Factor | 50 MINIMUM SINGLE COMPONENT SINGLE WINDING AND 60 MAXIMUM SINGLE COMPONENT SINGLE WINDING |
AARG | Reliability Indicator | NOT ESTABLISHED |
ADAV | Overall Diameter | 0.156 INCHES NOMINAL |
ABHP | Overall Length | 1.227 INCHES MAXIMUM |
ABHY | Turn Quantity | 15 SINGLE COMPONENT SINGLE WINDING |
CQPZ | Winding Conductor Size | 0.00893 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING |
CRBZ | Winding Operating Current | 317.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING |
TTQY | Terminal Type And Quantity | 2 TAB, SOLDER LUG |
THSD | Thread Series Designator | UNC SINGLE GROUP |
CMLP | Thread Quantity Per Inch | 40 SINGLE GROUP |