Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
50-06 | 3 - Design Control Reference | 9 - No Longer Used | TRIMM INTERNATIONAL, INC. | 81812 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5965 | 001392809 | A06800 | 00737 | X | 4 | 6 | A | P | U | 25 Aug 1971 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZC01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4 | 3 | 9 | 3 | TX | D | 50-06 | 81812 | ![]() |
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | D3 | 0 | 10 Feb 1972 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
U.S. Army Communications Electronics, Fort Monmouth, NJ 07703-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | M | 658 | Z | 9 | A | H | Z | M | 063300 | H | 35290 | TELEPHONE-TELEPHONE-PART-VIZ--SUB-8 |
Defense Supply Center Columbus, Columbus, OH 43218
85
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHEJ | Headband Type | ADJUSTABLE DOUBLE BAND |
AFAH | Headband Material | RUBBER, CHLOROPRENE |
AHEK | Headband Covering Material | NYLON |
AHEL | Headband Padding Material | ANY ACCEPTABLE |
ABFF | Furnished Items | NONE |
AHEQ | Earphone Element Type | MAGNETIC |
AHES | Earphone Quantity | 2 |
AHEU | Earphone Cap Material | PLASTIC |
AHEV | Earphone Shell Material | PLASTIC |
AHEW | Earphone Cushion Material | ANY ACCEPTABLE |
AHEX | Earphone Interconnection Arrangement | SINGLE |
AARB | Terminal Type | WIRE LEAD |
AARA | Terminal Quantity | 2 |
AEEG | Terminal Location | EXTERNAL |
AHEY | Earphone Mounting Method | DIAMETRICALLY OPPOSED HOLES IN OUTSIDE PERIPHERY OF CASE |
AAQL | Body Style | HEADSET, MOLDED |
ACYW | Impedance Rating In Ohms | 600.0 NOMINAL |
AHFS | Acoustic Sensitivity Reference Rating | NOT RATED |
AHFT | Magnetic Shielding | NOT INCLUDED |
AHFU | Headset Connecting Cord Termination Location | AT CENTER CONNECTION |
AHFZ | Signal Input Terminal Type | PLUG |
AEEE | Connector Manufacturer Code | 81812 |
AEEF | Connector Manufacturer Part Number | 501 |