Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
4N25 | 3 - Design Control Reference | 2 - Production Item | ELECTRONIC INDUSTRIES ASSOCIATION | 80131 | ![]() |
RELEASE6446 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | ELECTRONIC INDUSTRIES ASSOCIATION | 80131 | ![]() |
45.240.000 | 5 - Replaced / Discontinued | 2 - Production Item | SCHURICHT DISTRELEC GMBH | D5272 | ![]() |
420-500556-000 | 5 - Replaced / Discontinued | 2 - Production Item | IMPATH NETWORKS INC | 36658 | ![]() |
597-289 | 5 - Replaced / Discontinued | 2 - Production Item | RS COMPONENTS LIMITED | K2504 | ![]() |
025-00250 | 5 - Replaced / Discontinued | 2 - Production Item | DIGITECH INDUSTRIES INC | 14031 | ![]() |
19-14194-00 | 5 - Replaced / Discontinued | 2 - Production Item | COMPAQ FEDERAL LLC | 15476 | ![]() |
91381847 | 5 - Replaced / Discontinued | 2 - Production Item | THALES | F6481 | ![]() |
ES5238-01 | 5 - Replaced / Discontinued | 9 - No Longer Used | DRS SUSTAINMENT SYSTEMS, INC. | 20418 | ![]() |
4N25 | 5 - Replaced / Discontinued | 9 - No Longer Used | FREESCALE SEMICONDUCTOR, INC. | 04713 | ![]() |
4N25 | 5 - Replaced / Discontinued | 9 - No Longer Used | ISOCOM INC | 47379 | ![]() |
4N25 | 5 - Replaced / Discontinued | 9 - No Longer Used | OPTEK TECHNOLOGY INC | 32694 | ![]() |
4N25 | C - Advisory Reference | 1 - Incomplete Part Number | STATE HEALTH SERVICES, TEXAS | 01537 | ![]() |
1003070-01 | C - Advisory Reference | 1 - Incomplete Part Number | L-3 COMMUNICATIONS CORPORATION | 1PQF4 | ![]() |
4N25 | C - Advisory Reference | 1 - Incomplete Part Number | MONSANTO INDUSTRIAL CHEMICALS CO | 50522 | ![]() |
4N25 | C - Advisory Reference | 1 - Incomplete Part Number | TEXAS INSTRUMENTS INCORPORATED | 01295 | ![]() |
4N25 | C - Advisory Reference | 1 - Incomplete Part Number | TEXAS INSTRUMENTS INCORPORATED | 01295 | ![]() |
4N25A | C - Advisory Reference | 1 - Incomplete Part Number | TEXAS INSTRUMENTS INCORPORATED | 01295 | ![]() |
4N25A | C - Advisory Reference | 1 - Incomplete Part Number | FREESCALE SEMICONDUCTOR, INC. | 04713 | ![]() |
4N25A-730A-02 | C - Advisory Reference | 1 - Incomplete Part Number | FREESCALE SEMICONDUCTOR, INC. | 04713 | ![]() |
4261-4025 | C - Advisory Reference | 1 - Incomplete Part Number | GENRAD INC | 24655 | ![]() |
19-112F00M00R00 | C - Advisory Reference | 1 - Incomplete Part Number | CONCURRENT COMPUTER CORPORATION | 30331 | ![]() |
403-0001 | E - Replace Reference Number | 8 - Replacement NSN | DDC PERTEC PERIPHERALS CORP | 32097 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
Replaced Reference Number. A manufacturerÆs part number, government specification/standard or other design control reference number that is superseded, discontinued or replaced resulting from a cancel-use action on a NSN which was recorded with ISC 3 or E. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5980 | 010262437 | A23900 | 62335 | X | 4 | 2 | Q | N | B | A | 19 Aug 1976 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
The approved item name applied to this item exists for use exclusively with the partial descriptive method of item identification - Miscellaneous Items Federal Item Identification Guide A239.
CCLI — Commerce Control List Item Demilitarization not required. CCLI are dual-use (military, commercial, and other strategic uses) items under the jurisdiction of the Bureau of Export Administration, U.S. Department of Commerce, through the Export Administration Regulations. The types of items under the Commerce Control List (CCL) are commodities (i.e., equipment, materials, electronics, propulsion systems, etc.), software, and technology. The CCL does not include those items exclusively controlled by another department or agency of the U.S. Government.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Represents items with ESD sensitivity.
Item does not contain Precious Metal.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZB01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZC01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZF01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
YJ01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZN01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZT01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZX01 | 1 Jan 1993 | |||||||||||||||||||||||||||||
ZK01 | 1 Dec 1994 | |||||||||||||||||||||||||||||
ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
YB01 | 1 Oct 1996 | |||||||||||||||||||||||||||||
ZG01 | 1 Dec 1996 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
YA01 | 1 Dec 2001 | |||||||||||||||||||||||||||||
ZU01 | 1 Aug 2005 | |||||||||||||||||||||||||||||
A918 | A196 | 3 | R | Z | CD | BS | 1 Aug 2006 | |||||||||||||||||||||||
C911 | C007 | 3 | R | 1 Aug 2006 | ||||||||||||||||||||||||||
MC49 | MC13 | 3 | R | Z | PA | 1 Aug 2006 | ||||||||||||||||||||||||
N9BN | N9ND | 3 | R | Z | HD | GT | JB | HD | 1 Aug 2006 | |||||||||||||||||||||
S911 | S007 | 3 | R | Z | XN | 1 Aug 2006 | ||||||||||||||||||||||||
WB01 | 1 Aug 2006 | |||||||||||||||||||||||||||||
BGX1 | 3 | R | 1 Jan 2008 | |||||||||||||||||||||||||||
WP01 | 1 Jun 2011 | |||||||||||||||||||||||||||||
YS01 | 1 Feb 2015 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
National Security Agency, ATTN: L111, Fort George G. Meade, MD 20755-6000
Naval ICP, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
USAMC Data Management Center, Redstone Arsenal, AL 35898-5239
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 3 | ZZ | 4N25 | 80131 | ![]() | ||||||
5 | 1 | 3 | ZZ | RELEASE6446 | 80131 | ![]() | ||||||
4 | 5 | 2 | 3 | ZG | A | 45.240.000 | D5272 | ![]() | ||||
5 | 2 | 4 | ZZ | 91381847 | F6481 | ![]() | ||||||
1 | 5 | 2 | 3 | YB | A | 597-289 | K2504 | ![]() | ||||
1 | 5 | 2 | 5 | 48 | A | 025-00250 | 14031 | ![]() | ||||
5 | 2 | 4 | ZZ | 19-14194-00 | 15476 | ![]() | ||||||
5 | 2 | 5 | ZZ | 420-500556-000 | 36658 | ![]() | ||||||
5 | 9 | E | ZZ | 4N25 | 47379 | ![]() | ||||||
5 | 9 | 3 | ZZ | 4N25 | 04713 | ![]() | ||||||
5 | 9 | 2 | ZZ | ES5238-01 | 20418 | ![]() | ||||||
1 | 5 | 9 | 5 | 48 | B | 4N25 | 32694 | ![]() | ||||
C | 1 | 6 | ZZ | AC | 4261-4025 | 24655 | ![]() | |||||
C | 1 | 2 | ZZ | AB | 19-112F00M00R00 | 30331 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 4N25A | 04713 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 4N25A-730A-02 | 04713 | ![]() | |||||
C | 1 | 6 | ZZ | AW | 4N25 | 01295 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 4N25A | 01295 | ![]() | |||||
1 | C | 1 | 5 | 48 | B | 4N25 | 01537 | ![]() | ||||
C | 1 | 9 | ZZ | AB | 4N25 | 50522 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 1003070-01 | 1PQF4 | ![]() | |||||
4 | E | 8 | 5 | 9Z | D | 403-0001 | 32097 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
USA
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Germany
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Spain
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Federal Aviation Administration, Oklahoma City, OK 73125
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Navy
Air Force
Air Force / Defense Logistics Agency
The reference number is of the type for which an indication of document availability is not required.
Replaced Reference Number. A manufacturerÆs part number, government specification/standard or other design control reference number that is superseded, discontinued or replaced resulting from a cancel-use action on a NSN which was recorded with ISC 3 or E. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
DLIS-K, Battle Creek, MI 49037-3084
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
1 | TX | 0 | 3 | TX | 1 | 15 Sep 1998 | 5980010244377 | 15 Sep 1998 |
1 | TX | 0 | 3 | TX | 1 | 15 Sep 1998 | 5980010305268 | 15 Sep 1998 |
1 | TX | 0 | 3 | TX | 1 | 15 Sep 1998 | 5980010316845 | 15 Sep 1998 |
1 | TX | 0 | 3 | TX | 1 | 15 Sep 1998 | 5980012229279 | 15 Sep 1998 |
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
48 | 72D | 3 | 9 | A | H | Z | W | 061680 | Z | 34570 | ELEC-WIRING-PLUGS-ETC |
Federal Aviation Administration, Oklahoma City, OK 73125
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | Z | U | 1 | Z | EA | 0 | |
DM | SMS | Z | U | 1 | Z | EA | 0 | |
DN | SMS | Z | U | 1 | EA | 0 | ||
DS | SMS | Z | U | 1 | N | EA | 0 | |
GP | SMS | Z | U | 1 | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
U.S. Coast Guard
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | GX | 1 | AAA | 0.1 lbs | 0.005 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | X | D3 | DO | 39 | Q | Q | U | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Preserve by Method 41 as follows: Items subject to damage by electromagnetic and electrostatic field forces shall be initially wrapped in material conforming to MIL-PRF-81705, Type III, or bags conforming to MIL-DTL-117, Type II, Class H, Style 2, or cushioned in material conforming to A-A-3129, Type I, Grade B or PPP-C-795, Class 2 or PPP-C-1797, Type II, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to MIL-DTL-117, Type I, Class F, Style 1. Reclosable cushioned pouches conforming to MIL-DTL-81997, Type I or II, may be used in lieu of initial wrap or cushioning. Lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. Materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. Electrostatic discharge (ESD) sensitive caution labels shall be applied in accordance with MIL-STD-129.
Any suitable process that is not injurious to the item.
No requirement
As required to protect the item or elements of the package
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
Any suitable fiber box included in this table may be used (see J.4.9.1).
ESD sensitive electronic device requirements of MIL-STD-129 apply
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
TEXT | General Characteristics Item Description | PLASTIC CASE,0.350 IN. L,0.250 IN. W,0.180 IN. H,6 PIN DUAL IN-LINE PKG,CURRENT TRANSFER RATIO 20 PERCENT MIN.,2500 VDC ISOLATION VOLTAGE,SATURATION VOLTAGE 0.5 VDC MAX,RESPONSE TIME 2.0 USEC |