Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
118212-001 | 3 - Design Control Reference | 2 - Production Item | HARRIS CORPORATION | 91417 | |
239008P1 | 5 - Replaced / Discontinued | 2 - Production Item | BAE SYSTEMS INFORMATION AND | 94117 | |
146C70600 | 5 - Replaced / Discontinued | 2 - Production Item | K&L MICROWAVE, INC. | 50140 | |
GS839FJ2 | 5 - Replaced / Discontinued | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
S-4075 | 5 - Replaced / Discontinued | 2 - Production Item | R L C ELECTRONICS, INC. | 12598 | |
3505-1009 | 5 - Replaced / Discontinued | 2 - Production Item | SELEX ES LTD | K0662 | |
5220-1004 | 5 - Replaced / Discontinued | 2 - Production Item | SELEX ES LTD | K0662 | |
3505-1009 | 5 - Replaced / Discontinued | 9 - No Longer Used | MARCONI AVIONICS LTD | U3755 | |
5220-1004 | 5 - Replaced / Discontinued | 9 - No Longer Used | MARCONI AVIONICS LTD | U3755 | |
118212-001 | 5 - Replaced / Discontinued | 9 - No Longer Used | R L C ELECTRONICS, INC. | 12598 | |
146C70600 | 5 - Replaced / Discontinued | 9 - No Longer Used | L-3 COMMUNICATIONS CORPORATION | 82152 | |
146C70600-8 | C - Advisory Reference | 1 - Incomplete Part Number | L-3 COMMUNICATIONS CORPORATION | 82152 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5985 | 000052503 | A158A0 | 05298 | X | 1 | B | P | U | 14 Jun 1972 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
ZF01 | 1 Mar 2000 | |||||||||||||||||||||||||||||
ZX01 | 1 Nov 2003 | |||||||||||||||||||||||||||||
A918 | A196 | 1 | G | Z | CD | CL | CT | 1 Apr 2006 | ||||||||||||||||||||||
FXGX | FXTX | 1 | G | Z | SX | 1 Apr 2006 | ||||||||||||||||||||||||
N9BN | N9ND | 1 | G | Z | GH | GT | KE | HD | 1 Apr 2006 | |||||||||||||||||||||
S911 | S007 | 1 | G | Z | XN | 1 Apr 2006 | ||||||||||||||||||||||||
ZU01 | 1 May 2006 | |||||||||||||||||||||||||||||
ZD01 | 1 Jul 2011 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
National Security Agency, ATTN: L111, Fort George G. Meade, MD 20755-6000
Naval ICP, Philadelphia, PA 19111
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | A | TX | D | 118212-001 | 91417 | |||||
1 | 5 | 2 | A | TX | D | 239008P1 | 94117 | |||||
5 | 2 | 2 | ZK | D | 3505-1009 | K0662 | ||||||
5 | 2 | 2 | ZK | D | 5220-1004 | K0662 | ||||||
5 | 2 | 5 | ZZ | S-4075 | 12598 | |||||||
5 | 2 | A | TX | GS839FJ2 | 26512 | |||||||
5 | 2 | 6 | TX | 146C70600 | 50140 | |||||||
3 | 5 | 9 | 6 | TX | B | 146C70600 | 82152 | |||||
1 | 5 | 9 | 2 | ZK | D | 3505-1009 | U3755 | |||||
1 | 5 | 9 | 2 | ZK | D | 5220-1004 | U3755 | |||||
5 | 9 | 5 | TX | B | 118212-001 | 12598 | ||||||
C | 1 | 6 | ZZ | AC | 146C70600-8 | 82152 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
United Kingdom
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Navy
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | TX | 0 | 18 Jun 1972 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 723 | Z | 9 | A | H | Z | P | 061300 | X | 34410 | CIRCUIT-BREAKER-SWITCH-NOI |
Defense Supply Center Columbus, Columbus, OH 43218
Radio Parts, Batteries and Equipment, excluding Tubes Packed separately
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XF3: Stock Fund (Except Munitions); NAVY: Perishable Subsistence Items
ARMY: When repair is beyond lower level maintenance capability, evacuate the item to depot. Disposal is not authorized below wholesale level; MARINE CORPS: Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level; NAVY: Field Level Reparables
ARMY: If condemned or uneconomically repairable, then dispose at direct support (ds) level; DLA: This item has been reviewed and a determination made that the item can be restored to a serviceable condition from an unserviceable condition at the organizational/field level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at the third echelon level; NAVY: (1) Fast-Moving 1I Cog Forms (2) Non-Perishable Provisions
Department of the Army
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 42 | 1 | AAA | 0.5 lbs | 0.022 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | EA | DA | X | DO | 00 | Q | Q | U | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Container, watervaporproof bag, sealed, container
Any suitable process that is not injurious to the item.
No requirement
MIL-DTL-17667, neutral wrapping paper
A-A-1051, paperboard cushioning
As required to protect the item or elements of the package
Any suitable fiber box included in this table may be used (see J.4.9.1).
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AKPE | Actuator Current Type And Rating In Amps | 0.17 DC MAXIMUM |
AKPC | Actuator Operating Method | RELAY |
AKPJ | Actuator Voltage In Volts | 20.0 MINIMUM AND 30.0 MAXIMUM |
AAQL | Body Style | RECTANGULAR |
AHUC | Coaxial Connector Series Designation | SMA |
AHUD | Connector End Design | FEMALE |
AKRC | Coupling Position Quantity | 7 |
MDCL | Material Document And Classification | QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE COVER |
MDCL | Material Document And Classification | QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE BODY |
MDCL | Material Document And Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE CONNECTOR(S) |
MATT | Material | ALUMINUM BODY |
MATT | Material | ALUMINUM COVER |
MATT | Material | STEEL CONNECTOR(S) |
AKNV | Minimum Crosstalk Rating In Decibels | 65.0 SINGLE |
AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
CQYJ | Mounting Facility Pattern | FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY PATTERN |
ACZB | Frequency Rating | 0.0 GIGAHERTZ MINIMUM AND 8.0 GIGAHERTZ MAXIMUM 1ST FREQUENCY VOLTAGE STANDING WAVE RATIO0.0 GIGAHERTZ MINIMUM AND 8.0 GIGAHERTZ MAXIMUM 1ST FREQUENCY INSERTION LOSS REFERENCE8.0 GIGAHERTZ MINIMUM AND 13.0 GIGAHERTZ MAXIMUM 2ND FREQUENCY VOLTAGE STANDING WAVE RATIO8.0 GIGAHERTZ MINIMUM AND 13.0 GIGAHERTZ MAXIMUM 2ND FREQUENCY INSERTION LOSS REFERENCE13.0 GIGAHERTZ MINIMUM AND 18.0 GIGAHERTZ MAXIMUM 3RD FREQUENCY VOLTAGE STANDING WAVE RATIO13.0 GIGAHERTZ MINIMUM AND 18.0 GIGAHERTZ MAXIMUM 3RD FREQUENCY INSERTION LOSS REFERENCE0.0 GIGAHERTZ MINIMUM AND 18.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY OPERATING0.0 GIGAHERTZ MINIMUM AND 18.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY CROSSTALK REFERENCE |
AFGA | Operating Temp Range | -54.0 TO 85.0 DEG CELSIUS |
AHTX | Insertion Loss In Decibels | 0.30 1ST |
AHTX | Insertion Loss In Decibels | 0.50 3RD |
AHTX | Insertion Loss In Decibels | 0.40 2ND |
AFDS | Longest Horizontal Distance Between Mounting Centers | 1.370 INCHES MINIMUM SINGLE MOUNTING FACILITY PATTERN AND 1.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY PATTERN |
AFDV | Longest Vertical Distance Between Mounting Centers | 1.370 INCHES MINIMUM SINGLE MOUNTING FACILITY PATTERN AND 1.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY PATTERN |
ABKW | Overall Height | 1.750 INCHES NOMINAL |
ABHP | Overall Length | 2.040 INCHES NOMINAL |
ABMK | Overall Width | 1.750 INCHES NOMINAL |
AKPX | Pole Quantity | 1 |
AEBV | Unthreaded Mounting Hole Diameter | 0.139 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
AHTW | Voltage Standing Wave Ratio | 1.40 2ND |
AHTW | Voltage Standing Wave Ratio | 1.35 1ST |
AHTW | Voltage Standing Wave Ratio | 1.50 3RD |
STDC | Surface Treatment Document And Classification | MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE BODY OUTSIDE SURFACES |
STDC | Surface Treatment Document And Classification | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE CONNECTOR(S) OUTSIDE SURFACES |
STDC | Surface Treatment Document And Classification | TT-L-20 FED STD SINGLE TREATMENT RESPONSE COVER OUTSIDE SURFACES |
SFTT | Surface Treatment | LACQUER COVER OUTSIDE SURFACES |
SFTT | Surface Treatment | NICKEL BODY OUTSIDE SURFACES |
SFTT | Surface Treatment | PASSIVATE CONNECTOR(S) OUTSIDE SURFACES |
AKPN | Switch Operation Sequence | MAKES BEFORE BREAKS |
AEEA | Switch Type | NONTRANSFER |
AKPP | Switching Time | 20.0 MILLISECONDS |
TTQY | Terminal Type And Quantity | 7 RECEPTACLE, COAXIAL AND 7 TURRET |
AKPY | Throw Quantity | 6 |