5985-00-765-1239
WAVEGUIDE ASSEMBLY
5985-00-765-1239 (5985007651239, 007651239)
Part Numbers (3 listings): M3970/5-012 | MIL-W-3970/5 | UG-739/U |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| M3970/5-012 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY SPECIFICATIONS | 81349 |  |
| MIL-W-3970/5 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | |
| UG-739/U | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | JOINT ELECTRONICS TYPE DESIGNATION | 80058 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5985 | 007651239 | A073A0 | 00305 | X | 1 | B | P | U | 14 Apr 1972 |
A073A0
Federal Item Identification Guide (FIIG_4065)
00305
Item Naming Code (INC_4080)
14 Apr 1972
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZZ | ||||||||||||||||||||||||||||||
| N9BN | 1 | G | Z | KE | KE | 1 Apr 2006 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2 | E | TX | M3970/5-012 | 81349 | | ||||||
| 4 | 1 | E | TX | MIL-W-3970/5 | 81349 | | ||||||
| 5 | 1 | E | TX | UG-739/U | 80058 | | ||||||
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
4
Reference Number Category Code (RNCC_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 723 | Z | 9 | A | H | Z | W | 063520 | Z | 49770 | WAVEGUIDE-IN-BOXES-CRATES |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
723
Water Commodity Code (WRT_CMDTY_CD_9275)
Radio Parts, Batteries and Equipment, excluding Tubes Packed separately
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
063520
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49770
Uniform Freight Classification (UFC_CD_MODF_3040)
WAVEGUIDE-IN-BOXES-CRATES
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
X
Acquisition Advice Code (AAC_2507)
SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ACJL | Bend Angle In Deg | 45.0 SINGLE BEND H-PLANE |
| AAGR | Cross-Sectional Shape Style | INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| CSQT | Flange Connecting Facility And Quantity | 8 THREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY |
| CSQT | Flange Connecting Facility And Quantity | 8 UNTHREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY |
| AHTN | Flange Connecting Hole Diameter | 0.199 INCHES NOMINAL FIRST FLANGE SINGLE CONNECTION FACILITY |
| AHSY | Flange Inside Height | 0.872 INCHES NOMINAL FIRST FLANGE |
| AHSY | Flange Inside Height | 1.002 INCHES NOMINAL SECOND FLANGE |
| AHTD | Flange Depth | 0.375 INCHES NOMINAL SECOND FLANGE |
| AHTD | Flange Depth | 0.938 INCHES NOMINAL FIRST FLANGE |
| AHSX | Flange Inside Width | 1.875 INCHES NOMINAL FIRST FLANGE |
| AHSX | Flange Inside Width | 2.002 INCHES NOMINAL SECOND FLANGE |
| AHSF | Flange Quantity | 2 |
| CTCJ | Flange Style | CHOKE TYPE FIRST FLANGE |
| CTCJ | Flange Style | COVER TYPE SECOND FLANGE |
| AHTC | Flange Outside Diameter | 3.625 INCHES NOMINAL FIRST FLANGE |
| AHTC | Flange Outside Diameter | 3.625 INCHES NOMINAL SECOND FLANGE |
| FLEX | Flexibility | RIGID SINGLE TUBING SEGMENT |
| MATT | Material | ALUMINUM ALLOY SINGLE TUBING SEGMENT AND FLANGE |
| MATT | Material | ANY ACCEPTABLE SINGLE TUBING JACKET |
| CQJX | Nominal Thread Size | 0.190 INCHES SECOND FLANGE SINGLE CONNECTION FACILITY |
| STYL | Style Designator | BEND TYPE |
| AHRV | Tubing Wall Construction Style | SEAMLESS SINGLE TUBING SEGMENT |
| CRLB | Waveguide Inside Height | 0.867 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| CRFH | Waveguide Inside Width | 1.867 INCHES MINIMUM AND 1.877 INCHES MAXIMUM |
| CSPL | Waveguide Longer Offset Distance | 5.919 INCHES MINIMUM AND 5.979 INCHES MAXIMUM |
| CWBG | Waveguide Offset Distance | 5.919 INCHES MINIMUM AND 5.979 INCHES MAXIMUM |
| CSFC | Waveguide Outside Height | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CQHN | Waveguide Outside Width | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 81349-MIL-W-3970/5 GOVERNMENT SPECIFICATION |
| SFTT | Surface Treatment | ANY ACCEPTABLE SINGLE TUBING SEGMENT AND FLANGE ALL SURFACES |
| AAJD | Thread Class | 2B SECOND FLANGE SINGLE CONNECTION FACILITY |
| AAJF | Thread Direction | RIGHT-HAND SECOND FLANGE SINGLE CONNECTION FACILITY |
| THSD | Thread Series Designator | UNF SECOND FLANGE SINGLE CONNECTION FACILITY |
| CMLP | Thread Quantity Per Inch | 32 SECOND FLANGE SINGLE CONNECTION FACILITY |
Back to TopBack to Top
