5985-00-946-3867
WAVEGUIDE ASSEMBLY
5985-00-946-3867 (5985009463867, 009463867)
Part Numbers (4 listings): 110788 | 206820 | TR641489 | 10-20142-508 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 110788 | 3 - Design Control Reference | 2 - Production Item | CONTINENTAL MICROWAVE AND TOOL CO., | 66544 |  |
| 206820 | 3 - Design Control Reference | 2 - Production Item | MICROTECH, INC. | 54647 |  |
| TR641489 | 5 - Replaced / Discontinued | 2 - Production Item | MICROWAVE ENGINEERING CORPORATION | 06351 |  |
| 110788 | 5 - Replaced / Discontinued | 9 - No Longer Used | LITTON SYSTEMS INC | 80006 |  |
| 10-20142-508 | 7 - Vendor Item Drawing Reference | 2 - Production Item | THE BOEING COMPANY | 81205 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5985 | 009463867 | A073A0 | 00305 | X | 1 | D | P | A | 0 | 9 Mar 1966 |
A073A0
Federal Item Identification Guide (FIIG_4065)
00305
Item Naming Code (INC_4080)
9 Mar 1966
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 May 1997 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 2 | 5 | TG | D | 206820 | 54647 | | ||||
| 3 | 2 | 5 | ZZ | 110788 | 66544 | | ||||||
| 5 | 2 | 2 | TG | D | TR641489 | 06351 | | |||||
| 3 | 5 | 9 | 5 | TG | D | 110788 | 80006 | | ||||
| 3 | 7 | 2 | 2 | TG | D | 10-20142-508 | 81205 | | ||||
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
TG
Reference Number Action Activity Code (RNAAC_2900)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 6 Mar 1993 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
6 Mar 1993
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TG | J | 72D | Z | Z | A | H | Z | M | 063520 | B | 49770 | WAVEGUIDE-IN-BOXES-CRATES-SUB |
TG
Originating Activity Code (ORIG_ACTY_CD_4210)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
J
Less Than Carload (LCL_CD_2760)
100.2
72D
Water Commodity Code (WRT_CMDTY_CD_9275)
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
Z
Special Handling Code (SP_HDLG_CD_9240)
No special handling required. Heavy Lift (HL). Five short tons (10,000 lbs) or more. Applies to any piece, package, or palletized, unitized or containerized unit (excluding SEAVAN/MILVAN). Outsized Dimensions. Dimensions of any piece, package, or palletized, unitized or containerized unit (excluding SEAVAN/MILVAN, CONEXs, and POVs) which exceed six (6) feet in any dimension.
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
M
Less Than Truckload (CLAS_RTNG_CD_2770)
85
063520
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
B
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49770
Uniform Freight Classification (UFC_CD_MODF_3040)
WAVEGUIDE-IN-BOXES-CRATES-SUB
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | 33 | XXX | 2.0 lbs | 0.116 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 00 | E | Q | U |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
33
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Greaseproof-waterproof bag, Sealed
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
2.0 lbs
Unit Pack Weight (UP_WT_5153)
0.116 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| STYL | Style Designator | BEND TYPE |
| CSPL | Waveguide Longer Offset Distance | 5.900 INCHES NOMINAL |
| CWBG | Waveguide Offset Distance | 3.410 INCHES NOMINAL |
| AAGR | Cross-Sectional Shape Style | INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| CQHN | Waveguide Outside Width | 1.000 INCHES NOMINAL |
| CRFH | Waveguide Inside Width | 0.900 INCHES NOMINAL |
| CRLB | Waveguide Inside Height | 0.400 INCHES NOMINAL |
| CSFC | Waveguide Outside Height | 0.500 INCHES NOMINAL |
| FLEX | Flexibility | RIGID ALL TUBING SEGMENT |
| AHRV | Tubing Wall Construction Style | STRAIGHT SEAM ALL TUBING SEGMENT |
| ACJL | Bend Angle In Deg | 120.0 SINGLE BEND E-PLANE |
| MATT | Material | ALUMINUM ALL TUBING SEGMENT AND FLANGE |
| SFTT | Surface Treatment | CHROMATE ZINC ALL TUBING SEGMENT AND FLANGE ALL SURFACES |
| AHSF | Flange Quantity | 2 |
| CTCJ | Flange Style | COVER TYPE ALL FLANGES |
| AHSX | Flange Inside Width | 1.000 INCHES NOMINAL ALL FLANGES |
| AHSY | Flange Inside Height | 0.500 INCHES NOMINAL ALL FLANGES |
| AHSZ | Flange Outside Width | 1.625 INCHES NOMINAL ALL FLANGES |
| AHTA | Flange Outside Height | 1.625 INCHES NOMINAL ALL FLANGES |
| AHTD | Flange Depth | 0.438 INCHES NOMINAL ALL FLANGES |
| CSQT | Flange Connecting Facility And Quantity | 4 UNTHREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY |
| AHTN | Flange Connecting Hole Diameter | 0.169 INCHES NOMINAL ALL FLANGES SINGLE CONNECTION FACILITY |
| CQGM | Maximum Operating Pressure | 20.0 POUNDS PER SQUARE INCH GAGE |
| AHTW | Voltage Standing Wave Ratio | 1.08 |
| ZZZV | Fsc Application Data | BEACON,RADIO,NAVIGATION,AIRBORNE |
Back to TopBack to Top
