5990-00-138-2730
SYNCHRO,TRANSMITTER
5990-00-138-2730 (5990001382730, 001382730)
Part Numbers (4 listings): 147-043-0001 | BGC-11-F-2/B633 | 5RS910-7E | CR90910029 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 147-043-0001 | 1 - Source of Control Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 95542 |  |
| BGC-11-F-2/B633 | 3 - Design Control Reference | 2 - Production Item | MOOG INC. | 99932 |  |
| 5RS910-7E | 5 - Replaced / Discontinued | 2 - Production Item | KEARFOTT CORPORATION | 05088 |  |
| CR90910029 | 5 - Replaced / Discontinued | 2 - Production Item | KEARFOTT CORPORATION | 05088 | |
| 5RS910-7E | 5 - Replaced / Discontinued | 9 - No Longer Used | KEARFOTT CORPORATION | 88818 |  |
| 147-043-0001 | 5 - Replaced / Discontinued | 9 - No Longer Used | MOOG INC. | 99932 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5990 | 001382730 | A07800 | 02073 | Y | 4 | 5 | D | N | A | 0 | 24 Jul 1971 |
A07800
Federal Item Identification Guide (FIIG_4065)
02073
Item Naming Code (INC_4080)
24 Jul 1971
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
Y
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
5
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist but lack of technical data and/or the press of time force temporary use of the partial descriptive or reference method.
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
| ZK01 | 1 Jul 2000 | |||||||||||||||||||||||||||||
| FXGX | FXTX | 1 | B | Z | SX | 1 Apr 2006 | ||||||||||||||||||||||||
| N9BN | N9ND | 1 | B | Z | KE | GT | KE | 1 Apr 2006 | ||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 2 | A | TX | D | 147-043-0001 | 95542 | | ||||
| 3 | 2 | E | ZZ | BGC-11-F-2/B633 | 99932 | | ||||||
| 5 | 2 | 6 | ZZ | 5RS910-7E | 05088 | | ||||||
| 5 | 2 | E | ZZ | CR90910029 | 05088 | | ||||||
| 3 | 5 | 9 | 5 | KE | D | 5RS910-7E | 88818 | | ||||
| 5 | 9 | 5 | KE | 147-043-0001 | 99932 | | ||||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KE
Reference Number Action Activity Code (RNAAC_2900)
Naval ICP, Philadelphia, PA 19111
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | KA | 0 | 17 Jan 1972 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
KA
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Naval Air Systems Command, Washington, DC 20360
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
17 Jan 1972
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 593 | Z | 9 | A | K | Z | W | 062820 | Z | 35080 | RADIO-TV-TRANSMIT-RECEIVE-SETS |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
K
Air Commodity Code (AIR_CMTY_HDLG_9215)
Clothing, including clothing equipment (other than arms and chemical supplies) cordage, fabrics and leather, parachutes, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
062820
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
35080
Uniform Freight Classification (UFC_CD_MODF_3040)
RADIO-TV-TRANSMIT-RECEIVE-SETS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
7
Controlled Item Inventory Code (CIIC_2863)
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
Quantity Unit Pack (QUP_6106)
1
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | XXX | 0.3 lbs | 0.027 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 00 | Q | Q | U | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.3 lbs
Unit Pack Weight (UP_WT_5153)
0.027 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGAV | End Item Identification | EA-6B, A6E AND F-111 AIRCRAFT |
| AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 16.00 CENTIMETER-GRAMS NOMINAL |
| AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 4.00 CENTIMETER-GRAMS NOMINAL |
| AAFZ | Body Material | STEEL, STAINLESS |
| AJSL | Body Size | 11 |
| AAQL | Body Style | STANDARD ROUND B |
| CRTL | Criticality Code Justification | FEAT |
| ABKK | Flange Diameter | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | Flange Thickness | 0.0930 INCHES NOMINAL |
| AJSS | Frequency In Hertz | 400.0 NOMINAL |
| AJWX | Mounting Surface To Terminal End Distance | 1.8350 INCHES MAXIMUM |
| AJSR | Rotor Input Voltage Rating In Volts | 26.0 NOMINAL |
| AJTS | Rotor Dc Resistance In Ohms | 19.00 NOMINAL |
| ABWV | Shaft Diameter | 0.1195 INCHES MINIMUM FRONT SHAFT |
| ABWV | Shaft Diameter | 0.1200 INCHES MAXIMUM REAR SHAFT |
| CWYF | Shaft End Play Determining Weight | 8.0 OUNCES |
| AJWH | Shaft End Play | 0.0015 INCHES NOMINAL |
| AJWG | Shaft Maximum Radial Play | 0.0008 INCHES |
| AJXB | Shaft Maximum Runout | 0.0010 INCHES |
| CWXK | Shaft Radial Play Determining Weight | 4.0 OUNCES |
| AJWE | Shaft Radial Play Test Point | 0.125 INCHES NOMINAL |
| CQZS | Shaft Slot Depth | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRHN | Shaft Slot Width | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | Shaft Type | ROUND, FLATTED SINGLE SHAFT |
| ABXF | Shaft Length | 0.5480 INCHES MINIMUM FRONT SHAFT |
| ABXF | Shaft Length | 0.5780 INCHES MAXIMUM REAR SHAFT |
| AAVH | Shoulder Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AJWR | Shoulder Length | 0.0620 INCHES NOMINAL |
| ABHP | Overall Length | 2.4600 INCHES MAXIMUM |
| AJVF | Phase Shift Angle In Deg | 4.700 INPUT TO OUTPUT NOMINAL |
| AJWQ | Pilot Length | 0.0620 INCHES NOMINAL |
| AAVL | Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| FEAT | Special Features | WEAPON SYSTEM ESSENTIAL |
| ABPC | Undercut Width | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| AJSW | Zro Resistance In Ohms | 32.00 NOMINAL |
| AJTA | Zrs Resistance In Ohms | 35.00 NOMINAL |
| AJSY | Zso Resistance In Ohms | 7.00 NOMINAL |
| AJTC | Zss Resistance In Ohms | 40.00 NOMINAL |
| AJTT | Stator Dc Resistance In Ohms | 5.75 NOMINAL |
| CQTM | Terminal Location | FRONT |
| TTQY | Terminal Type And Quantity | 5 TAB, SOLDER LUG |
Back to TopBack to Top
