Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
VCT11-18-4D | 3 - Design Control Reference | 2 - Production Item | GENERAL DYNAMICS GLOBAL IMAGING | 10112 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 002631289 | A07800 | 15289 | N | K | A | N | A | 0 | 15 Jul 1973 |
The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
N1H5 | 2 | T | V | HD | GG | 15 Jun 2009 | ||||||||||||||||||||||||
ZF01 | 1 May 2015 |
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.
Non-procured: Stand alone consumable items which are not procured and will not be transferred to DLA for management. (PICA AAC must be V, X, or Y, PICA LOA must be 06 or 23, ISC may not be 1, 3, B, or E, and there must be no I&S phrase codes.)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Philadelphia, PA 19111û5098
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 3 | HH | D | VCT11-18-4D | 10112 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Navy ICP, Mechanicsburg, PA 17055-0788
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 98 | 0 | 1 Feb 1975 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HH | Q | 590 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI | 1 |
Navy ICP, Mechanicsburg, PA 17055-0788
70
Generators and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
NAVY: Medium Demand Velocity Items (Consumables)
Department of the Navy
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -7.0/+7.0 |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 0.07 INCH-OUNCES NOMINAL |
AAFZ | Body Material | STEEL, CORROSION RESISTING |
AJSL | Body Size | 10 |
AAQL | Body Style | STANDARD ROUND B |
ABKK | Flange Diameter | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0930 INCHES NOMINAL |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJVG | Maximum Fundamental Null Voltage In Millivolts Per Volt | 30.00 OUTPUT |
AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 60.00 |
CRYY | Mounting Facility Nominal Screw Thread Diameter | 0.112 INCHES |
AKEJ | Mounting Facility Screw Thread Series Designator | UNC |
AJWX | Mounting Surface To Terminal End Distance | 1.7320 INCHES NOMINAL |
AJTS | Rotor Dc Resistance In Ohms | 385.00 NOMINAL |
AHYF | Securing Hole Quantity | 4 |
ABWV | Shaft Diameter | 0.1870 INCHES MINIMUM FRONT SHAFT AND 0.1872 INCHES MAXIMUM FRONT SHAFT |
ABXF | Shaft Length | 0.5500 INCHES NOMINAL FRONT SHAFT |
AKAN | Shaft Thread Class | 2A |
AKAF | Shaft Thread Direction | RIGHT-HAND FRONT SHAFT |
CQWQ | Shaft Thread Length | 0.1900 INCHES NOMINAL FRONT SHAFT |
AJYY | Shaft Thread Series Designator | UNF FRONT SHAFT |
CRSJ | Shaft Type | ROUND, THREADED FRONT SHAFT |
CWBH | Shaft Nominal Thread Size | 0.1849 INCHES FRONT SHAFT |
AAVH | Shoulder Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.0620 INCHES NOMINAL |
ABHP | Overall Length | 1.2928 INCHES MINIMUM AND 1.2951 INCHES MAXIMUM |
AJVF | Phase Shift Angle In Deg | 5.000 INPUT TO OUTPUT NOMINAL |
AAVL | Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
AJWQ | Pilot Length | 0.0620 INCHES NOMINAL |
CSJY | Transformation Ratio | 0.735 ROTOR TO STATOR NOMINAL |
ABPC | Undercut Width | 0.0500 INCHES NOMINAL |
AJTH | Zro Impedance Angle In Deg | 79.00 NOMINAL |
AJTG | Zro Impedance Magnitude In Ohms | 5400.00 NOMINAL |
AJTM | Zrs Impedance Angle In Deg | 79.00 NOMINAL |
AJTL | Zrs Impedance Magnitude In Ohms | 5400.00 NOMINAL |
AJSQ | Stator Input Electrical Power Rating | 250.0 MILLIWATTS NOMINAL |
AJSN | Stator Input Voltage Rating In Volts | 90.0 NOMINAL |
AJTT | Stator Dc Resistance In Ohms | 555.00 NOMINAL |
AJSP | Stator Input Current Rating | 20.0 MILLIAMPERES NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 6 SCREW |