Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
7R545-1D | 3 - Design Control Reference | 2 - Production Item | KEARFOTT CORPORATION | 88818 | |
417636 | 3 - Design Control Reference | 2 - Production Item | KEARFOTT CORPORATION | 88818 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 003321735 | A07800 | 02071 | X | 4 | 9 | D | N | A | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FXGX | FXTX | 3 | P | Z | SX | 1 Apr 2006 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
The rights to use the data needed to purchase this part from additional sources are not owned by the Government and cannot be purchased. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | X | SB | D | 417636 | 88818 | |||||
3 | 3 | 2 | 5 | SB | D | 7R545-1D | 88818 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
DAC not known. Found on U.S. NSNs that were assigned before 1975. Cannot be used for new item assignment, or any maintenance action on older NSNs.
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
C | KA | 0 | 6 Sep 1971 |
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
Naval Air Systems Command, Washington, DC 20360
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
593 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI |
Motors and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Air Force
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | ZZ | XXX | 1.0 lbs | 0.125 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
X | 00 | Q | Q | 6 | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
See J.4.1.b
As required to protect the item or elements of the package
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 3.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -7.0/+7.0 |
AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 16.00 CENTIMETER-GRAMS NOMINAL |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 8.00 CENTIMETER-GRAMS NOMINAL |
AJSL | Body Size | 11 |
AAQL | Body Style | STANDARD ROUND B |
ABKK | Flange Diameter | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0900 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AKEJ | Mounting Facility Screw Thread Series Designator | UNC |
AJWX | Mounting Surface To Terminal End Distance | 1.8000 INCHES NOMINAL |
AHYF | Securing Hole Quantity | 4 |
ABWV | Shaft Diameter | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
CQZS | Shaft Slot Depth | 0.0300 INCHES NOMINAL SINGLE SHAFT |
CRHN | Shaft Slot Width | 0.2500 INCHES NOMINAL SINGLE SHAFT |
CTBP | Shaft Tip Length | 0.2660 INCHES NOMINAL SINGLE SHAFT |
CRSJ | Shaft Type | ROUND, SLOTTED, UNDERCUT SINGLE SHAFT |
CWJD | Shaft Undercut Diameter | 0.1130 INCHES MINIMUM SINGLE SHAFT AND 0.1170 INCHES MAXIMUM SINGLE SHAFT |
AEDC | Shaft Undercut Width | 0.1710 INCHES NOMINAL SINGLE SHAFT |
ABXF | Shaft Length | 0.5620 INCHES NOMINAL SINGLE SHAFT |
AAVH | Shoulder Diameter | 1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
ABHP | Overall Length | 2.4140 INCHES MINIMUM AND 2.4260 INCHES MAXIMUM |
AJVF | Phase Shift Angle In Deg | 8.700 INPUT TO OUTPUT NOMINAL |
AJWQ | Pilot Length | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
AAVL | Pilot Diameter | 0.6250 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM |
CSJY | Transformation Ratio | 1.270 ROTOR TO STATOR NOMINAL |
ABPC | Undercut Width | 0.0500 INCHES NOMINAL |
AJTH | Zro Impedance Angle In Deg | 70.00 NOMINAL |
AJTG | Zro Impedance Magnitude In Ohms | 72.30 NOMINAL |
AJTK | Zso Impedance Angle In Deg | 75.50 NOMINAL |
AJTJ | Zso Impedance Magnitude In Ohms | 35.70 NOMINAL |
AJSP | Stator Input Current Rating | 230.0 MILLIAMPERES MINIMUM AND 270.0 MILLIAMPERES MAXIMUM |
AJSQ | Stator Input Electrical Power Rating | 800.0 MILLIWATTS NOMINAL |
AJSN | Stator Input Voltage Rating In Volts | 11.8 NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 6 SCREW |