Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
629907-1 | 1 - Source of Control Reference | 2 - Production Item | HONEYWELL ASCA INC | 07217 | |
10CT4DILIS-001 | 3 - Design Control Reference | 2 - Production Item | API HAROWE INC | 06989 | |
629907-1 | 5 - Replaced / Discontinued | 2 - Production Item | MOOG INC. | 1K426 | |
629907-1 | 5 - Replaced / Discontinued | 2 - Production Item | KEARFOTT CORPORATION | 88818 | |
629907-1 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL DYNAMICS GLOBAL IMAGING | 10112 | |
629907-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | MOOG INC. | 99932 |
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 004020564 | A07800 | 15289 | X | 1 | A | N | U | 1 Apr 1970 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DGX1 | DTX1 | 2 | B | TX | 1 Apr 2006 |
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Defense Supply Center Columbus, Columbus, OH 43218
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 1 | 2 | A | TX | D | 629907-1 | 07217 | |||||
3 | 2 | A | TX | 10CT4DILIS-001 | 06989 | |||||||
5 | 2 | 5 | TX | 629907-1 | 10112 | |||||||
5 | 2 | 5 | TX | 629907-1 | 1K426 | |||||||
5 | 2 | 5 | TX | 629907-1 | 88818 | |||||||
5 | 9 | 5 | TX | B | 629907-1 | 99932 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
C | KA | 0 | 18 Jun 1972 |
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
Naval Air Systems Command, Washington, DC 20360
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SG | 658 | Z | 9 | A | H | Z | W | 061700 | Z | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
403 SCMS/GUED, 5215 Thurlow St, Suite 5, Bldg 70C Wright-Patterson AFB OH 45433
Electical Appliances, Small
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 51 | 1 | AAA |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | EA | DA | X | D1 | DO | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
MIL-DTL-17667, neutral wrapping paper
A-A-1051, paperboard cushioning
As required to protect the item or elements of the package
PPP-B-566 or PPP-B-676, folding or setup box.
Any suitable fiber box included in this table may be used (see J.4.9.1).
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -15.0/+15.0 |
AGAV | End Item Identification | 4920-00-400-3818 |
AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 9.00 CENTIMETER-GRAMS MAXIMUM |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 3.00 CENTIMETER-GRAMS MAXIMUM |
CTCW | Alignment Hole Bolt Circle Diameter | 0.6750 INCHES MINIMUM AND 0.6810 INCHES MAXIMUM |
CRSY | Alignment Hole Depth | 0.0700 INCHES MAXIMUM |
AJVW | Alignment Hole Quantity | 3 |
AAFZ | Body Material | STEEL, STAINLESS |
AJSL | Body Size | 10 |
AAQL | Body Style | STANDARD ROUND C |
ABKK | Flange Diameter | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0630 INCHES MAXIMUM |
AFJN | Fragility Factor | MODERATELY RUGGED |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJVG | Maximum Fundamental Null Voltage In Millivolts Per Volt | 25.00 INPUT |
AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 30.00 |
CRYY | Mounting Facility Nominal Screw Thread Diameter | 0.0860 INCHES |
AKEJ | Mounting Facility Screw Thread Series Designator | UNF |
AJWX | Mounting Surface To Terminal End Distance | 1.2400 INCHES MAXIMUM |
AEBZ | Schematic Diagram Designator | 1 Y-ROTOR, 1 STATOR |
CQXQ | Plus J Zro Reactance In Ohms | 2600.00 NOMINAL |
CRKL | Plus J Zrs Reactance In Ohms | 286.00 NOMINAL |
CRGZ | Plus J Zso Reactance In Ohms | 447.00 NOMINAL |
AHYF | Securing Hole Quantity | 3 |
ABWV | Shaft Diameter | 0.1245 INCHES MINIMUM SINGLE SHAFT AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
CWYF | Shaft End Play Determining Weight | 8.0 OUNCES |
AJWH | Shaft End Play | 0.0010 INCHES MAXIMUM |
AJXB | Shaft Maximum Runout | 0.0010 INCHES |
AJWG | Shaft Maximum Radial Play | 0.0005 INCHES |
CWXK | Shaft Radial Play Determining Weight | 4.0 OUNCES |
AJWE | Shaft Radial Play Test Point | 0.125 INCHES MAXIMUM |
CQZS | Shaft Slot Depth | 0.0250 INCHES NOMINAL SINGLE SHAFT |
CRHN | Shaft Slot Width | 0.0200 INCHES NOMINAL SINGLE SHAFT |
CRSJ | Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
ABXF | Shaft Length | 1.1350 INCHES MINIMUM SINGLE SHAFT AND 1.1890 INCHES MAXIMUM SINGLE SHAFT |
AAVH | Shoulder Diameter | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
ABHP | Overall Length | 2.4100 INCHES MINIMUM AND 2.4700 INCHES MAXIMUM |
AJVF | Phase Shift Angle In Deg | 9.000 OUTPUT TO INPUT NOMINAL |
AJWQ | Pilot Length | 0.0350 NOMINAL MILS AND 0.0410 NOMINAL CENTIMETERS |
AAVL | Pilot Diameter | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
CSJY | Transformation Ratio | 2.203 ROTOR TO STATOR NOMINAL |
ABPC | Undercut Width | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
ABPA | Undercut Diameter | 0.8300 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM |
AJSW | Zro Resistance In Ohms | 695.00 NOMINAL |
AJTA | Zrs Resistance In Ohms | 874.00 NOMINAL |
AJSY | Zso Resistance In Ohms | 115.00 NOMINAL |
AJSP | Stator Input Current Rating | 24.0 MILLIAMPERES MAXIMUM |
AJSQ | Stator Input Electrical Power Rating | 34.0 MILLIWATTS NOMINAL |
AJSN | Stator Input Voltage Rating In Volts | 11.8 NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 6 WIRE LEAD |