Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
362032-1 | 3 - Design Control Reference | 2 - Production Item | RAYTHEON TECHNICAL SERVICES COMPANY | 3B150 | |
362032-1 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 54X10 | |
362032-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | RAYTHEON COMPANY | 49956 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 004827927 | A07800 | 02073 | X | K | D | N | U | 1 Feb 1971 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZZ | ||||||||||||||||||||||||||||||
N9BN | 3 | C | Z | GH | HD | 1 Nov 2005 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 1 | TX | 362032-1 | 3B150 | |||||||
5 | 2 | 5 | ZZ | 362032-1 | 54X10 | |||||||
3 | 5 | 9 | 1 | TX | B | 362032-1 | 49956 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 593 | Z | 9 | A | K | Z | W | 062820 | Z | 35080 | RADIO-TV-TRANSMIT-RECEIVE-SETS |
Defense Supply Center Columbus, Columbus, OH 43218
Motors and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Clothing, including clothing equipment (other than arms and chemical supplies) cordage, fabrics and leather, parachutes, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -6.0/+6.0 |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 0.10 INCH-OUNCES MAXIMUM |
CTCW | Alignment Hole Bolt Circle Diameter | 1.2500 INCHES NOMINAL |
CRSY | Alignment Hole Depth | 0.1250 INCHES NOMINAL |
AJVW | Alignment Hole Quantity | 4 |
AAFZ | Body Material | STEEL, CORROSION RESISTING |
AJSL | Body Size | 18 |
AAQL | Body Style | STANDARD ROUND C |
ABKK | Flange Diameter | 1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0930 INCHES NOMINAL |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJVG | Maximum Fundamental Null Voltage In Millivolts Per Volt | 40.00 OUTPUT |
AHCG | Maximum Temp Rise | 20.0 DEG CELSIUS |
AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 60.00 |
AJWX | Mounting Surface To Terminal End Distance | 2.5200 INCHES NOMINAL |
AJST | Rotor Input Current Rating | 110.0 MILLIAMPERES MAXIMUM |
AJSV | Rotor Input Electrical Power Rating | 900.0 MILLIWATTS NOMINAL |
AJSR | Rotor Input Voltage Rating In Volts | 115.0 NOMINAL |
ABWV | Shaft Diameter | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
CWBH | Shaft Nominal Thread Size | 0.190 INCHES SINGLE SHAFT |
ABXF | Shaft Length | 0.5400 INCHES NOMINAL SINGLE SHAFT |
AKAN | Shaft Thread Class | 2A SINGLE SHAFT |
AKAF | Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
CQWQ | Shaft Thread Length | 0.2000 INCHES NOMINAL SINGLE SHAFT |
AJYY | Shaft Thread Series Designator | UNF SINGLE SHAFT |
CRSJ | Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
AAVH | Shoulder Diameter | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.1320 INCHES NOMINAL |
ABHP | Overall Length | 3.0600 INCHES NOMINAL |
AJVF | Phase Shift Angle In Deg | 1.500 INPUT TO OUTPUT NOMINAL |
AAVL | Pilot Diameter | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
AJWQ | Pilot Length | 0.0400 INCHES NOMINAL |
CSJY | Transformation Ratio | 0.783 ROTOR TO STATOR NOMINAL |
ABPA | Undercut Diameter | 1.6250 INCHES NOMINAL |
ABPC | Undercut Width | 0.0780 INCHES NOMINAL |
AJTH | Zro Impedance Angle In Deg | 84.00 MINIMUM AND 87.50 MAXIMUM |
AJTG | Zro Impedance Magnitude In Ohms | 1045.00 MINIMUM AND 1400.00 MAXIMUM |
AJTP | Zss Impedance Angle In Deg | 34.00 MINIMUM AND 48.00 MAXIMUM |
AJTN | Zss Impedance Magnitude In Ohms | 40.00 MINIMUM AND 57.00 MAXIMUM |
AJXA | Spline Tooth Diametral Pitch | 120 SINGLE SHAFT |
AJVM | Spline Tooth Quantity | 21 SINGLE SHAFT |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 5 SCREW |
TEST | Test Data Document | 49956-C362032 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |