Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
7753719P1 | 3 - Design Control Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 03538 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 005423775 | A07800 | 22966 | X | 1 | A | N | U | 1 Jan 1961 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YA | ||||||||||||||||||||||||||||||
ZZ | ||||||||||||||||||||||||||||||
YA01 | 1 Jan 2002 | |||||||||||||||||||||||||||||
N9BN | 5 | L | Z | HD | HD | 1 Jul 2005 |
Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The DoD activity assigning this code shall furnish the name and CAGE Code of the prime contractor to the activity responsible for acquiring the part.
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 3 | 2 | 5 | HD | A | 7753719P1 | 03538 |
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
72D | Z | 9 | A | H | Z | W | 061700 | Z | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -7.0/+7.0 |
AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 5.00 INCH-OUNCES NOMINAL |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 1.00 INCH-OUNCES NOMINAL |
ABPM | Body Diameter | 1.9060 INCHES NOMINAL |
AAFZ | Body Material | STEEL, CORROSION RESISTING |
AJSL | Body Size | 23 |
AAQL | Body Style | STANDARD ROUND, ROTATABLE HOUSING |
ABKK | Flange Diameter | 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.2470 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJVG | Maximum Fundamental Null Voltage In Millivolts Per Volt | 30.00 INPUT |
AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 70.00 |
AJWX | Mounting Surface To Terminal End Distance | 3.4630 INCHES MAXIMUM |
AEBZ | Schematic Diagram Designator | 2 ROTOR, 2 STATOR |
CQXQ | Plus J Zro Reactance In Ohms | 520.00 NOMINAL |
CRKL | Plus J Zrs Reactance In Ohms | 53.00 NOMINAL |
CRGZ | Plus J Zso Reactance In Ohms | 123.00 NOMINAL |
AJTS | Rotor Dc Resistance In Ohms | 120.00 NOMINAL |
AJSR | Rotor Input Voltage Rating In Volts | 20.0 MAXIMUM |
ABWV | Shaft Diameter | 0.2470 INCHES NOMINAL SINGLE SHAFT |
ABXF | Shaft Length | 0.7190 INCHES NOMINAL SINGLE SHAFT |
CWBH | Shaft Nominal Thread Size | 0.190 INCHES SINGLE SHAFT |
AKAN | Shaft Thread Class | 2A SINGLE SHAFT |
AKAF | Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
CQWQ | Shaft Thread Length | 0.3250 INCHES NOMINAL SINGLE SHAFT |
AJYY | Shaft Thread Series Designator | UNF SINGLE SHAFT |
CRSJ | Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
AAVH | Shoulder Diameter | 1.9900 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.4100 INCHES NOMINAL |
ABHP | Overall Length | 4.9010 INCHES MAXIMUM |
AJVF | Phase Shift Angle In Deg | 0.800 INPUT TO OUTPUT MINIMUM AND 1.600 INPUT TO OUTPUT MAXIMUM |
CSJY | Transformation Ratio | 1.000 ROTOR TO STATOR NOMINAL |
AJSW | Zro Resistance In Ohms | 110.00 NOMINAL |
AJTA | Zrs Resistance In Ohms | 123.00 NOMINAL |
AJSY | Zso Resistance In Ohms | 22.00 NOMINAL |
AJXA | Spline Tooth Diametral Pitch | 48 SINGLE SHAFT |
AJVM | Spline Tooth Quantity | 106 SINGLE SHAFT |
AJTT | Stator Dc Resistance In Ohms | 130.00 NOMINAL |
AJSN | Stator Input Voltage Rating In Volts | 20.0 MAXIMUM |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 8 SCREW |
TEST | Test Data Document | 03538-7753719+1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |