Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
TYPE15TR4MK16M0D0 | 3 - Design Control Reference | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
942R360-160 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
674779 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
674795 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
LD266486 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
TYPE15TR4A | 5 - Replaced / Discontinued | 9 - No Longer Used | L-3 COMMUNICATIONS CORPORATION | 28199 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 005569667 | A07800 | 02072 | X | 4 | 9 | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 5 | 2 | 1 | TX | D | 674779 | 10001 | |||||
3 | 5 | 2 | 1 | TX | D | 674795 | 10001 | |||||
3 | 5 | 2 | 1 | TX | D | LD266486 | 10001 | |||||
1 | 5 | 9 | 6 | HD | B | TYPE15TR4A | 28199 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KA | 0 | 8 Sep 1971 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Naval Air Systems Command, Washington, DC 20360
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Q | 590 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI | 1 |
70
Generators and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJSL | Body Size | 15 |
AAQL | Body Style | STANDARD ROUND B |
ABKK | Flange Diameter | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJWX | Mounting Surface To Terminal End Distance | 1.5950 INCHES MINIMUM AND 1.6010 INCHES MAXIMUM |
AJST | Rotor Input Current Rating | 180.0 MILLIAMPERES NOMINAL |
AJSV | Rotor Input Electrical Power Rating | 4.0 WATTS NOMINAL |
AJSR | Rotor Input Voltage Rating In Volts | 115.0 NOMINAL |
CWYF | Shaft End Play Determining Weight | 48.0 OUNCES |
AJWH | Shaft End Play | 0.0020 INCHES NOMINAL |
ABWV | Shaft Diameter | 0.1245 INCHES MINIMUM FRONT SHAFT AND 0.1247 INCHES MAXIMUM FRONT SHAFT |
AJXB | Shaft Maximum Runout | 0.0010 INCHES |
CWBH | Shaft Nominal Thread Size | 0.1246 INCHES FRONT SHAFT |
ABXF | Shaft Length | 0.5300 INCHES MINIMUM FRONT SHAFT AND 0.5500 INCHES MAXIMUM FRONT SHAFT |
AKAN | Shaft Thread Class | 2A FRONT SHAFT |
AKAF | Shaft Thread Direction | RIGHT-HAND FRONT SHAFT |
CQWQ | Shaft Thread Length | 0.4900 INCHES MINIMUM FRONT SHAFT AND 0.5100 INCHES MAXIMUM FRONT SHAFT |
AJYY | Shaft Thread Series Designator | UNF FRONT SHAFT |
CRSJ | Shaft Type | SPLINE W/THREADS FRONT SHAFT |
AAVH | Shoulder Diameter | 1.3015 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
ABHP | Overall Length | 2.2600 INCHES MINIMUM AND 2.2800 INCHES MAXIMUM |
AAVL | Pilot Diameter | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
AJWQ | Pilot Length | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
AJVV | Torque Gradient Per Angular Deg | 0.011 INCH-OUNCES NOMINAL |
CSJY | Transformation Ratio | 0.783 STATOR TO ROTOR NOMINAL |
ABPC | Undercut Width | 0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
AJXA | Spline Tooth Diametral Pitch | 120 FRONT SHAFT |
AJVM | Spline Tooth Quantity | 13 FRONT SHAFT |
AJTT | Stator Dc Resistance In Ohms | 640.00 NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 5 SCREW |