Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
R910-001 | 3 - Design Control Reference | 2 - Production Item | KEARFOTT CORPORATION | 05088 | |
RS910-001 | 5 - Replaced / Discontinued | 2 - Production Item | KEARFOTT CORPORATION | 05088 | |
VCX11-4A1-10 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL DYNAMICS GLOBAL IMAGING | 10112 | |
KGH11ERS40 | 5 - Replaced / Discontinued | 2 - Production Item | MOOG INC. | 99932 | |
RS910-001 | 5 - Replaced / Discontinued | 9 - No Longer Used | KEARFOTT CORPORATION | 88818 | |
R910-001 | 5 - Replaced / Discontinued | 9 - No Longer Used | KEARFOTT CORPORATION | 88818 | |
229-0096-00 | C - Advisory Reference | 1 - Incomplete Part Number | HERLEY CHICAGO | 98738 | |
229-0096-00 | C - Advisory Reference | 1 - Incomplete Part Number | ROCKWELL COLLINS, INC. | 13499 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 006525449 | A07800 | 02073 | X | K | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
N9BN | N9ND | 1 | G | Z | GH | KE | 1 Apr 2006 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval ICP, Philadelphia, PA 19111
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | TX | R910-001 | 05088 | |||||||
5 | 2 | 5 | TX | RS910-001 | 05088 | |||||||
3 | 5 | 2 | 5 | TX | D | VCX11-4A1-10 | 10112 | |||||
5 | 2 | 5 | TX | KGH11ERS40 | 99932 | |||||||
5 | 9 | A | TX | B | R910-001 | 88818 | ||||||
3 | 5 | 9 | 5 | TX | B | RS910-001 | 88818 | |||||
C | 1 | 5 | ZZ | AC | 229-0096-00 | 98738 | ||||||
C | 1 | 1 | ZZ | AC | 229-0096-00 | 13499 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
USA
Navy
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KA | 0 | 10 Nov 1971 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Naval Air Systems Command, Washington, DC 20360
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
593 | Z | 9 | A | K | Z | W | 062820 | Z | 35080 | RADIO-TV-TRANSMIT-RECEIVE-SETS |
Motors and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Clothing, including clothing equipment (other than arms and chemical supplies) cordage, fabrics and leather, parachutes, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 41 | 1 | AAA | 0.5 lbs | 0.029 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | NA | X | D3 | DO | 00 | E | Q | U |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
No requirement
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
As required to protect the item or elements of the package
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
Any suitable fiber box included in this table may be used (see J.4.9.1).
No special marking
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -10.0/+10.0 |
AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 16.0 CENTIMETER-GRAMS MAXIMUM |
AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 4.0 CENTIMETER-GRAMS MAXIMUM |
CTCW | Alignment Hole Bolt Circle Diameter | 0.8120 INCHES NOMINAL |
CRSY | Alignment Hole Depth | 0.0620 INCHES NOMINAL |
AJVW | Alignment Hole Quantity | 4 |
AAFZ | Body Material | STEEL, CORROSION RESISTING |
AJSL | Body Size | 11 |
AAQL | Body Style | STANDARD ROUND C |
ABKK | Flange Diameter | 1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
ABKU | Flange Thickness | 0.0930 INCHES NOMINAL |
AFJN | Fragility Factor | MODERATELY RUGGED |
AJSS | Frequency In Hertz | 400.0 NOMINAL |
AJVG | Maximum Fundamental Null Voltage In Millivolts Per Volt | 17.00 OUTPUT |
AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 26.00 |
AJWX | Mounting Surface To Terminal End Distance | 1.7960 INCHES NOMINAL |
CQXQ | Plus J Zro Reactance In Ohms | 106.00 NOMINAL |
CRKL | Plus J Zrs Reactance In Ohms | 9.30 NOMINAL |
CRGZ | Plus J Zso Reactance In Ohms | 17.80 NOMINAL |
AJSV | Rotor Input Electrical Power Rating | 950.0 MILLIWATTS NOMINAL |
AJSR | Rotor Input Voltage Rating In Volts | 26.0 NOMINAL |
AJTS | Rotor Dc Resistance In Ohms | 9.00 NOMINAL |
AJST | Rotor Input Current Rating | 280.0 MILLIAMPERES MAXIMUM |
ABWV | Shaft Diameter | 0.1867 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
CWBH | Shaft Nominal Thread Size | 0.190 INCHES SINGLE SHAFT |
AKAN | Shaft Thread Class | 2A SINGLE SHAFT |
AKAF | Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
CQWQ | Shaft Thread Length | 0.2460 INCHES MAXIMUM SINGLE SHAFT |
AJYY | Shaft Thread Series Designator | UNF SINGLE SHAFT |
CRSJ | Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
ABXF | Shaft Length | 0.6170 INCHES NOMINAL SINGLE SHAFT |
AAVH | Shoulder Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
AJWR | Shoulder Length | 0.0620 INCHES NOMINAL |
ABHP | Overall Length | 2.3510 INCHES NOMINAL |
AJVF | Phase Shift Angle In Deg | 5.000 INPUT TO OUTPUT NOMINAL |
AJWQ | Pilot Length | 0.0620 INCHES NOMINAL |
AAVL | Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
CSJY | Transformation Ratio | 0.454 ROTOR TO STATOR NOMINAL |
ABPA | Undercut Diameter | 0.9750 INCHES NOMINAL |
ABPC | Undercut Width | 0.0620 INCHES NOMINAL |
AJSW | Zro Resistance In Ohms | 15.50 NOMINAL |
AJTA | Zrs Resistance In Ohms | 21.00 NOMINAL |
AJSY | Zso Resistance In Ohms | 3.30 NOMINAL |
AJVM | Spline Tooth Quantity | 21 SINGLE SHAFT |
AJXA | Spline Tooth Diametral Pitch | 120 SINGLE SHAFT |
AJTT | Stator Dc Resistance In Ohms | 3.00 NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 5 SCREW |