Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
23CT6C | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY SPECIFICATIONS | 81349 | |
MIL-S-20708/53 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | |
23CT6C | 5 - Replaced / Discontinued | 2 - Production Item | EADS DEUTSCHLAND GMBH | D1901 | |
23CT6C | 5 - Replaced / Discontinued | 2 - Production Item | SAFT AB | S0514 | |
23CT6C | 5 - Replaced / Discontinued | 9 - No Longer Used | VERNITRON CORP | 10651 |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5990 | 006776496 | A07800 | 15289 | X | 4 | 6 | A | N | U | 21 Jan 1978 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
YA01 | 1 Jan 2002 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 2 | 4 | 9Z | D | 23CT6C | 81349 | |||||
1 | 4 | 1 | 4 | 9Z | D | MIL-S-20708/53 | 81349 | |||||
1 | 5 | 2 | 6 | 9Z | D | 23CT6C | D1901 | |||||
1 | 5 | 2 | 6 | 9Z | D | 23CT6C | S0514 | |||||
1 | 5 | 9 | 4 | 9Z | B | 23CT6C | 10651 |
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
DLIS-K, Battle Creek, MI 49037-3084
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | TX | 0 | 1 | TX | 0 | 22 Jun 1967 | 5990000602321 | 20 Sep 1986 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
98 | Q | 590 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI | 1 |
DLIS-LFF, Battle Creek, MI 49037-3084
70
Generators and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AJVL | Electrical Error Angular Range In Minutes | -6.0/+6.0 |
AAFZ | Body Material | ANY ACCEPTABLE |
AJSL | Body Size | 23 |
AAQL | Body Style | STANDARD ROUND D |
ABKK | Flange Diameter | 2.2500 INCHES NOMINAL |
ABKU | Flange Thickness | 2.5000 INCHES NOMINAL |
AJSS | Frequency In Hertz | 60.0 NOMINAL |
AHCG | Maximum Temp Rise | 10.0 DEG CELSIUS |
AAZW | Second Shoulder Diameter | 1.9995 INCHES NOMINAL |
AAZX | Second Shoulder Length | 0.1700 INCHES NOMINAL |
ABWV | Shaft Diameter | 2.2500 INCHES NOMINAL SINGLE SHAFT |
CWBH | Shaft Nominal Thread Size | 0.250 INCHES SINGLE SHAFT |
AKAN | Shaft Thread Class | 2A |
AKAF | Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
CQWQ | Shaft Thread Length | 0.3100 INCHES NOMINAL SINGLE SHAFT |
AJYY | Shaft Thread Series Designator | UNF SINGLE SHAFT |
CRSJ | Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
ABXF | Shaft Length | 0.6760 INCHES NOMINAL SINGLE SHAFT |
AAVH | Shoulder Diameter | 1.9900 INCHES NOMINAL |
AJWR | Shoulder Length | 0.2500 INCHES NOMINAL |
ABHP | Overall Length | 4.2990 INCHES NOMINAL |
AJVF | Phase Shift Angle In Deg | 14.000 INPUT TO OUTPUT NOMINAL |
AJWQ | Pilot Length | 0.0430 INCHES NOMINAL |
AAVL | Pilot Diameter | 0.6000 INCHES NOMINAL |
AJVV | Torque Gradient Per Angular Deg | 0.2 MILLIMETER-MILLIGRAMS NOMINAL |
CSJY | Transformation Ratio | 0.735 ROTOR TO STATOR NOMINAL |
AJTM | Zrs Impedance Angle In Deg | 14.00 MINIMUM AND 20.00 MAXIMUM |
AJTL | Zrs Impedance Magnitude In Ohms | 1350.00 MINIMUM AND 1650.00 MAXIMUM |
AJTK | Zso Impedance Angle In Deg | 70.00 MINIMUM AND 76.00 MAXIMUM |
AJTJ | Zso Impedance Magnitude In Ohms | 4200.00 MINIMUM AND 5100.00 MAXIMUM |
AJVM | Spline Tooth Quantity | 21 SINGLE SHAFT |
AJXA | Spline Tooth Diametral Pitch | 96 SINGLE SHAFT |
AJSP | Stator Input Current Rating | 20.0 MILLIAMPERES NOMINAL |
AJSQ | Stator Input Electrical Power Rating | 450.0 MILLIWATTS NOMINAL |
AJSN | Stator Input Voltage Rating In Volts | 90.0 NOMINAL |
CQTM | Terminal Location | REAR |
TTQY | Terminal Type And Quantity | 5 SCREW |