5990-00-717-5116
RESOLVER,ELECTRICAL,LINEAR
5990-00-717-5116 (5990007175116, 007175116)
Part Numbers (4 listings): CV21-010148-1 | LTH-11-H-3/A420 | LTH-11-H-3 | 1047255 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| CV21-010148-1 | 1 - Source of Control Reference | 2 - Production Item | TRIUMPH AEROSTRUCTURES, LLC | 80378 |  |
| LTH-11-H-3/A420 | 3 - Design Control Reference | 2 - Production Item | MOOG INC. | 99932 |  |
| LTH-11-H-3 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | MOOG INC. | 99932 | |
| 1047255 | 5 - Replaced / Discontinued | 9 - No Longer Used | ALLIED-SIGNAL INC | 77068 |  |
| 1047255 | C - Advisory Reference | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 59364 |  |
| 1047255 | C - Advisory Reference | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 59364 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5990 | 007175116 | A07800 | 31780 | X | 1 | A | N | U | 1 Jan 1963 |
A07800
Federal Item Identification Guide (FIIG_4065)
31780
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BN | N9ND | 3 | C | Z | KE | KE | 1 Jul 2005 | |||||||||||||||||||||||
| ZF01 | 1 May 2015 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 2 | 5 | KE | D | CV21-010148-1 | 80378 | | ||||
| 3 | 2 | E | TX | LTH-11-H-3/A420 | 99932 | | ||||||
| 5 | 1 | A | TX | LTH-11-H-3 | 99932 | | ||||||
| 3 | 5 | 9 | 5 | TX | B | 1047255 | 77068 | | ||||
| C | 1 | 5 | ZZ | 9F | 1047255 | 59364 | | |||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KE
Reference Number Action Activity Code (RNAAC_2900)
Naval ICP, Philadelphia, PA 19111
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | KA | 0 | 21 Aug 1970 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
KA
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Naval Air Systems Command, Washington, DC 20360
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
21 Aug 1970
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
062120
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34760
Uniform Freight Classification (UFC_CD_MODF_3040)
GENERATORS-MOTORS-PARTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 51 | 1 | AAA | 0.5 lbs | 0.013 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | NA | X | D3 | DO | 03 | E | Q | U |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
51
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.5 lbs
Unit Pack Weight (UP_WT_5153)
0.013 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AJVS | Actuator Friction Torque At Minus 55 Deg Celsius | 9.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | Actuator Friction Torque At Plus 25 Deg Celsius | 3.0 CENTIMETER-GRAMS MAXIMUM |
| AAFZ | Body Material | STEEL, CORROSION RESISTING |
| AJSL | Body Size | 11 |
| AAQL | Body Style | STANDARD ROUND C |
| ABKK | Flange Diameter | 1.0620 INCHES MAXIMUM |
| ABKU | Flange Thickness | 0.0620 INCHES NOMINAL |
| AFJN | Fragility Factor | MODERATELY RUGGED |
| AJSS | Frequency In Hertz | 400.0 NOMINAL |
| AJVP | Maximum Linear Range In Deg | -50.0/+50.0 |
| AJVH | Maximum Total Null Voltage Output In Millivolts Per Volt | 15.00 |
| AJWX | Mounting Surface To Terminal End Distance | 1.6000 INCHES MAXIMUM |
| AJVR | Output Voltage Change Per Deg In Volts | 0.332 |
| AJVQ | Linearity In Percent | 0.50 |
| CQXQ | Plus J Zro Reactance In Ohms | 16300.00 NOMINAL |
| CRGZ | Plus J Zso Reactance In Ohms | 127.00 NOMINAL |
| AJTS | Rotor Dc Resistance In Ohms | 820.00 NOMINAL |
| AJST | Rotor Input Current Rating | 7.0 MILLIAMPERES NOMINAL |
| AJSV | Rotor Input Electrical Power Rating | 101.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJSR | Rotor Input Voltage Rating In Volts | 115.0 NOMINAL |
| AEBZ | Schematic Diagram Designator | ERR-090 |
| ABWV | Shaft Diameter | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | Shaft Length | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| CWYF | Shaft End Play Determining Weight | 8.0 OUNCES |
| AJWH | Shaft End Play | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWE | Shaft Radial Play Test Point | 0.125 INCHES MAXIMUM |
| CWXK | Shaft Radial Play Determining Weight | 4.0 OUNCES |
| CQZS | Shaft Slot Depth | 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRHN | Shaft Slot Width | 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
| AJXB | Shaft Maximum Runout | 0.0010 INCHES |
| AJWG | Shaft Maximum Radial Play | 0.0005 INCHES |
| AAVH | Shoulder Diameter | 1.0000 INCHES MAXIMUM |
| AJWR | Shoulder Length | 0.0620 NOMINAL INCHES |
| ABHP | Overall Length | 2.1930 INCHES MAXIMUM |
| AJVF | Phase Shift Angle In Deg | 2.800 INPUT TO OUTPUT NOMINAL |
| AJWQ | Pilot Length | 0.0620 NOMINAL INCHES |
| AAVL | Pilot Diameter | 0.5000 INCHES MAXIMUM |
| CSJY | Transformation Ratio | 0.685 ROTOR TO STATOR NOMINAL |
| ABPA | Undercut Diameter | 0.9750 INCHES NOMINAL |
| ABPC | Undercut Width | 0.0810 INCHES NOMINAL |
| AJSY | Zso Resistance In Ohms | 68.00 NOMINAL |
| AJSW | Zro Resistance In Ohms | 2060.00 NOMINAL |
| AJTT | Stator Dc Resistance In Ohms | 62.00 NOMINAL |
| CQTM | Terminal Location | REAR |
| TTQY | Terminal Type And Quantity | 4 WIRE LEAD |
Back to TopBack to Top
