Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
SCD19833-9IN | 3 - Design Control Reference | 2 - Production Item | US ARMY COMMUNICATIONS & | 80063 | ![]() |
CX2151U9IN | 5 - Replaced / Discontinued | 2 - Production Item | JOINT ELECTRONICS TYPE DESIGNATION | 80058 | ![]() |
SMD208024 | 5 - Replaced / Discontinued | 2 - Production Item | US ARMY COMMUNICATIONS & | 80063 | ![]() |
SCDL19832 | 5 - Replaced / Discontinued | 9 - No Longer Used | US ARMY COMMUNICATIONS & | 80063 | ![]() |
GA51822 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMERICAN TELEPHONE AND TELEGRAPH CO | 64959 | ![]() |
GA51822 | 5 - Replaced / Discontinued | 9 - No Longer Used | AT AND T CORP | 70408 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5995 | 006657390 | A077A0 | 00856 | X | 4 | 3 | A | N | U | 1 Jan 1963 |
Cable, Cord, and Wire Assemblies: Communication Equipment
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
WB01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
A918 | A178 | 1 | G | Z | CD | BD | 1 May 2006 | |||||||||||||||||||||||
FXGG | FXCX | 1 | G | Z | SX | 1 May 2006 | ||||||||||||||||||||||||
MC41 | MC04 | 1 | G | Z | PA | 1 May 2006 | ||||||||||||||||||||||||
N9BG | N9GD | 1 | G | Z | GH | HD | 1 May 2006 | |||||||||||||||||||||||
ZX01 | 1 Jan 2010 | |||||||||||||||||||||||||||||
ZP01 | 1 Feb 2013 | |||||||||||||||||||||||||||||
BGX1 | 1 | G | 1 Jun 2014 | |||||||||||||||||||||||||||
ZM01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
ZF01 | 1 May 2015 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 1 | CX | D | SCD19833-9IN | 80063 | ![]() | ||||
3 | 5 | 2 | 4 | CX | D | CX2151U9IN | 80058 | ![]() | ||||
3 | 5 | 2 | 1 | CX | D | SMD208024 | 80063 | ![]() | ||||
3 | 5 | 9 | 1 | CX | B | SCDL19832 | 80063 | ![]() | ||||
3 | 5 | 9 | 5 | CX | D | GA51822 | 64959 | ![]() | ||||
3 | 5 | 9 | 5 | CX | B | GA51822 | 70408 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | CX | 0 | 15 Dec 1974 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
743 | Z | 9 | A | H | Z | P | 061130 | X | 34350 | CABLE-ASSEMBLY |
Electrical Cable
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | Z | U | 1 | Z | EA | 0 | |
DF | SMS | Z | U | 1 | N | EA | 0 | |
DM | SMS | Z | U | 1 | Z | EA | 0 | |
DN | SMS | Z | U | 1 | EA | 0 | ||
DS | SMS | Z | U | 1 | N | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | ZZ | XXX | 0.3 lbs | 9in x 0in x 0in | 0.032 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
X | ZZ | E | Q | M |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
See J.4.1.b
As required to protect the item or elements of the package
Special requirements
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AMQN | Conductor Quantity | 7 |
CXCW | Conductor Form | TINSEL ALL CONDUCTORS |
MATT | Material | COPPER ALLOY 162 CORE CONDUCTOR ALL CONDUCTORS |
MATT | Material | RUBBER SYNTHETIC 1ST POSITION JACKET CORD |
MATT | Material | COTTON 1ST POSITION SERVING ALL CONDUCTORS |
MATT | Material | RUBBER NATURAL 2ND POSITION PRIMARY INSULATION ALL CONDUCTORS |
MDCL | Material Document And Classification | MIL-I-3930,TYPE IS MIL SPEC SINGLE MATERIAL RESPONSE 2ND POSITION PRIMARY INSULATION ALL CONDUCTORS |
CXDQ | Conductor Arrangement And Quantity | 7 SINGLES |
HUES | Color | WHITE 1ST POSITION COVER FIRST CONDUCTOR |
HUES | Color | BLACK 2ND POSITION COVER SECOND CONDUCTOR |
HUES | Color | RED 3RD POSITION COVER THIRD CONDUCTOR |
HUES | Color | GREEN 4TH POSITION COVER FOURTH CONDUCTOR |
HUES | Color | BLUE 5TH POSITION COVER FIFTH CONDUCTOR |
HUES | Color | YELLOW 6TH POSITION COVER SIXTH CONDUCTOR |
HUES | Color | ORANGE 7TH POSITION COVER SEVENTH CONDUCTOR |
STYL | Style Designator | EXTERNAL CONNECTORS |
ACUE | Extended Length | 9.000 INCHES |
AWYJ | Retracted Length | 3.750 INCHES |
AAGR | Cross-Sectional Shape Style | ROUND |
ADVL | Cross Section Outside Diameter | 0.265 INCHES NOMINAL |
AKRZ | Termination Type | LUG TERMINAL W/MOUNTING SLOT BOTH ENDS ALL CONDUCTORS |
CXFM | Terminal Lug Aperture Size | 0.133 INCHES 1ST END ALL CONDUCTORS |
CXFM | Terminal Lug Aperture Size | 0.133 INCHES 2ND END FIRST CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.133 INCHES 2ND END SECOND CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.115 INCHES 2ND END THIRD CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.115 INCHES 2ND END FOURTH CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.133 INCHES 2ND END FIFTH CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.133 INCHES 2ND END SIXTH CONDUCTOR |
CXFM | Terminal Lug Aperture Size | 0.115 INCHES 2ND END SEVENTH CONDUCTOR |
CXGG | Terminal Manufacturer Identifying Reference Number | 41933 BOTH ENDS ALL CONDUCTORS |
CXGN | Terminal Commercial And Government Entity Code | 00779 1ST END ALL CONDUCTORS |
CXGN | Terminal Commercial And Government Entity Code | 00779 2ND END ALL CONDUCTORS |
CXGR | Strain Relief Style | LONG SHANK STAYHOOK 1ST END |
CXGR | Strain Relief Style | LONG SHANK STAYHOOK 2ND END |
ZZZV | Fsc Application Data | COMMUNICATIONS |