5999-00-454-5325
DELAY LINE
5999-00-454-5325 (5999004545325, 004545325)
Part Numbers (4 listings): 0300D0145 | FS4545-325 | 10549172 | D1634 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 0300D0145 | 3 - Design Control Reference | 2 - Production Item | BAE SYSTEMS INFORMATION AND | 94117 |  |
| FS4545-325 | 5 - Replaced / Discontinued | 2 - Production Item | FREQUENCY SELECTIVE NETWORKS INC | 56662 |  |
| 10549172 | 5 - Replaced / Discontinued | 2 - Production Item | SHILOH INDUSTRIES, INC. | 55097 | |
| D1634 | 5 - Replaced / Discontinued | 9 - No Longer Used | COMPUTER DEVICES CORP | 14948 | |
| 0300D0145 | 5 - Replaced / Discontinued | 9 - No Longer Used | LOCKHEED CORP | 87557 |  |
| 10549172 | 7 - Vendor Item Drawing Reference | 2 - Production Item | US ARMY ARDEC RDECOM | 19200 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5999 | 004545325 | A32100 | 06373 | X | 1 | D | P | A | 0 | 14 Apr 1969 |
5999
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Miscellaneous Electrical and Electronic Components
A32100
Federal Item Identification Guide (FIIG_4065)
06373
Item Naming Code (INC_4080)
14 Apr 1969
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
| A918 | A196 | 1 | G | Z | CD | CL | 1 Apr 2006 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
CD
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
CL
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | TX | 0300D0145 | 94117 | | ||||||
| 5 | 2 | 5 | TX | 10549172 | 55097 | | ||||||
| 5 | 2 | 5 | TX | FS4545-325 | 56662 | | ||||||
| 5 | 9 | 5 | TX | B | 0300D0145 | 87557 | | |||||
| 5 | 9 | 5 | TX | B | D1634 | 14948 | | |||||
| 3 | 7 | 2 | A | TX | D | 10549172 | 19200 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | BF | 0 | 17 Apr 1973 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
BF
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
17 Apr 1973
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BG | 658 | Z | 9 | A | H | Z | P | 061300 | X | 34410 | CIRCUIT-BREAKER-SWITCH-NOI |
BG
Originating Activity Code (ORIG_ACTY_CD_4210)
RDECOM-ECBC-RI Rock Island, IL 61299
658
Water Commodity Code (WRT_CMDTY_CD_9275)
Electical Appliances, Small
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
061300
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34410
Uniform Freight Classification (UFC_CD_MODF_3040)
CIRCUIT-BREAKER-SWITCH-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
7
Controlled Item Inventory Code (CIIC_2863)
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 41 | 1 | AAA | 0.6 lbs | 0.056 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | NA | X | D3 | DO | 00 | Q | Q | U | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
41
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.6 lbs
Unit Pack Weight (UP_WT_5153)
0.056 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BHTH | Attenuation In Decibels | 2.000 |
| ARBR | Body Depth | 0.926 INCHES NOMINAL |
| ADAQ | Body Length | 5.875 INCHES NOMINAL |
| AAQL | Body Style | RECTANGULAR, FRONT CONNECTION |
| ADAT | Body Width | 1.328 INCHES NOMINAL |
| CCDN | Delay Time Variation Method | TAPPED |
| AAUB | Hole Diameter | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AZGM | Mounting Facility | UNTHREADED HOLE |
| AKPV | Mounting Facility Quantity | 2 |
| BBBW | Mounting Provision Arrangement Style | 2 POSITION IN-LINE |
| AFGA | Operating Temp Range | -40.0 TO 175.0 DEG FAHRENHEIT |
| AFBH | Individual Section Quantity | 1 |
| ANSL | Input Impedance Rating | 100.000 OHMS |
| AFDS | Longest Horizontal Distance Between Mounting Centers | 5.318 INCHES MINIMUM AND 5.338 INCHES MAXIMUM |
| ANNQ | Material And Location | ANY ACCEPTABLE OVERALL |
| CCDX | Pulse Rise Time Rating | 100.0 NANOSECONDS |
| CCDQ | Section Delay Time | 1.620 MICROSECONDS MINIMUM SINGLE SECTION |
| CCDQ | Section Delay Time | 1.980 MICROSECONDS MAXIMUM SINGLE SECTION |
| CCDS | Segment Delay Time | 1.215 MICROSECONDS MINIMUM SINGLE SECTION 21ST SEGMENT |
| CCDS | Segment Delay Time | 1.305 MICROSECONDS MINIMUM SINGLE SECTION 25TH SEGMENT |
| CCDS | Segment Delay Time | 1.237 MICROSECONDS MINIMUM SINGLE SECTION 22ND SEGMENT |
| CCDS | Segment Delay Time | 1.260 MICROSECONDS MINIMUM SINGLE SECTION 23RD SEGMENT |
| CCDS | Segment Delay Time | 1.283 MICROSECONDS MINIMUM SINGLE SECTION 24TH SEGMENT |
| CCDS | Segment Delay Time | 1.485 MICROSECONDS MAXIMUM SINGLE SECTION 21ST SEGMENT |
| CCDS | Segment Delay Time | 1.595 MICROSECONDS MAXIMUM SINGLE SECTION 25TH SEGMENT |
| CCDS | Segment Delay Time | 1.620 MICROSECONDS MINIMUM SINGLE SECTION 26TH SEGMENT |
| CCDS | Segment Delay Time | 1.512 MICROSECONDS MAXIMUM SINGLE SECTION 22ND SEGMENT |
| CCDS | Segment Delay Time | 1.540 MICROSECONDS MAXIMUM SINGLE SECTION 23RD SEGMENT |
| CCDS | Segment Delay Time | 1.567 MICROSECONDS MAXIMUM SINGLE SECTION 24TH SEGMENT |
| CCDS | Segment Delay Time | 1.980 MICROSECONDS MAXIMUM SINGLE SECTION 26TH SEGMENT |
| CCDS | Segment Delay Time | 110.000 NANOSECONDS MAXIMUM SINGLE SECTION 2ND SEGMENT |
| CCDS | Segment Delay Time | 135.000 NANOSECONDS MINIMUM SINGLE SECTION 3RD SEGMENT |
| CCDS | Segment Delay Time | 165.000 NANOSECONDS MAXIMUM SINGLE SECTION 3RD SEGMENT |
| CCDS | Segment Delay Time | 180.000 NANOSECONDS MINIMUM SINGLE SECTION 4TH SEGMENT |
| CCDS | Segment Delay Time | 225.000 NANOSECONDS MINIMUM SINGLE SECTION 5TH SEGMENT |
| CCDS | Segment Delay Time | 220.000 NANOSECONDS MAXIMUM SINGLE SECTION 4TH SEGMENT |
| CCDS | Segment Delay Time | 270.000 NANOSECONDS MINIMUM SINGLE SECTION 6TH SEGMENT |
| CCDS | Segment Delay Time | 275.000 NANOSECONDS MAXIMUM SINGLE SECTION 5TH SEGMENT |
| CCDS | Segment Delay Time | 315.000 NANOSECONDS MINIMUM SINGLE SECTION 7TH SEGMENT |
| CCDS | Segment Delay Time | 330.000 NANOSECONDS MAXIMUM SINGLE SECTION 6TH SEGMENT |
| CCDS | Segment Delay Time | 360.000 NANOSECONDS MINIMUM SINGLE SECTION 8TH SEGMENT |
| CCDS | Segment Delay Time | 385.000 NANOSECONDS MAXIMUM SINGLE SECTION 7TH SEGMENT |
| CCDS | Segment Delay Time | 40.000 NANOSECONDS MINIMUM SINGLE SECTION 1ST SEGMENT |
| CCDS | Segment Delay Time | 405.000 NANOSECONDS MINIMUM SINGLE SECTION 9TH SEGMENT |
| CCDS | Segment Delay Time | 440.000 NANOSECONDS MAXIMUM SINGLE SECTION 8TH SEGMENT |
| CCDS | Segment Delay Time | 495.000 NANOSECONDS MINIMUM SINGLE SECTION 11TH SEGMENT |
| CCDS | Segment Delay Time | 450.000 NANOSECONDS MINIMUM SINGLE SECTION 10TH SEGMENT |
| CCDS | Segment Delay Time | 495.000 NANOSECONDS MAXIMUM SINGLE SECTION 9TH SEGMENT |
| CCDS | Segment Delay Time | 540.000 NANOSECONDS MINIMUM SINGLE SECTION 12TH SEGMENT |
| CCDS | Segment Delay Time | 550.000 NANOSECONDS MAXIMUM SINGLE SECTION 10TH SEGMENT |
| CCDS | Segment Delay Time | 585.000 NANOSECONDS MINIMUM SINGLE SECTION 13TH SEGMENT |
| CCDS | Segment Delay Time | 605.000 NANOSECONDS MAXIMUM SINGLE SECTION 11TH SEGMENT |
| CCDS | Segment Delay Time | 60.000 NANOSECONDS MAXIMUM SINGLE SECTION 1ST SEGMENT |
| CCDS | Segment Delay Time | 630.000 NANOSECONDS MINIMUM SINGLE SECTION 14TH SEGMENT |
| CCDS | Segment Delay Time | 675.000 NANOSECONDS MINIMUM SINGLE SECTION 15TH SEGMENT |
| CCDS | Segment Delay Time | 660.000 NANOSECONDS MAXIMUM SINGLE SECTION 12TH SEGMENT |
| CCDS | Segment Delay Time | 715.000 NANOSECONDS MAXIMUM SINGLE SECTION 13TH SEGMENT |
| CCDS | Segment Delay Time | 720.000 NANOSECONDS MINIMUM SINGLE SECTION 16TH SEGMENT |
| CCDS | Segment Delay Time | 742.500 NANOSECONDS MINIMUM SINGLE SECTION 17TH SEGMENT |
| CCDS | Segment Delay Time | 765.000 NANOSECONDS MINIMUM SINGLE SECTION 18TH SEGMENT |
| CCDS | Segment Delay Time | 770.000 NANOSECONDS MAXIMUM SINGLE SECTION 14TH SEGMENT |
| CCDS | Segment Delay Time | 787.500 NANOSECONDS MINIMUM SINGLE SECTION 19TH SEGMENT |
| CCDS | Segment Delay Time | 825.000 NANOSECONDS MAXIMUM SINGLE SECTION 15TH SEGMENT |
| CCDS | Segment Delay Time | 810.000 NANOSECONDS MINIMUM SINGLE SECTION 20TH SEGMENT |
| CCDS | Segment Delay Time | 880.000 NANOSECONDS MAXIMUM SINGLE SECTION 16TH SEGMENT |
| CCDS | Segment Delay Time | 90.000 NANOSECONDS MINIMUM SINGLE SECTION 2ND SEGMENT |
| CCDS | Segment Delay Time | 907.500 NANOSECONDS MAXIMUM SINGLE SECTION 17TH SEGMENT |
| CCDS | Segment Delay Time | 962.500 NANOSECONDS MAXIMUM SINGLE SECTION 19TH SEGMENT |
| CCDS | Segment Delay Time | 935.000 NANOSECONDS MAXIMUM SINGLE SECTION 18TH SEGMENT |
| CCDS | Segment Delay Time | 990.000 NANOSECONDS MAXIMUM SINGLE SECTION 20TH SEGMENT |
| CCDR | Segment Quantity Per Section | 26 SINGLE SECTION |
| BZWM | Signal Delay Method | ELECTROMECHANICAL |
| ABFY | Overall Depth | 1.114 INCHES NOMINAL |
| CCFF | Terminal Type And Quantity | 26 TAB SOLDER LUG |
| TEST | Test Data Document | 19200-10549172 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
Back to TopBack to Top
