6125-00-229-0347
MOTOR-GENERATOR
6125-00-229-0347 (6125002290347, 002290347)
Part Numbers (7 listings): PU143UANDPU143AU | MIL10761 | 200592 | PU143AU | PU143U | CS12F24 | DDB6743 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| PU143UANDPU143AU | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY SPECIFICATIONS | 81349 |  |
| MIL10761 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | |
| 200592 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AIR LOGISTICS CORPORATION | 01413 |  |
| PU143AU | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | US ARMY COMMUNICATIONS & | 80063 |  |
| PU143U | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | US ARMY COMMUNICATIONS & | 80063 | |
| CS12F24 | 5 - Replaced / Discontinued | 9 - No Longer Used | EASTERN AIR DEVICES INC | 19070 |  |
| DDB6743 | 5 - Replaced / Discontinued | 9 - No Longer Used | L-3 COMMUNICATIONS CORPORATION | 06141 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61 | 6125 | 002290347 | A271A0 | 00830 | X | 4 | 9 | A | N | A | A | 0 | 1 Jan 1963 |
61
Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)
Electric Wire, and Power and Distribution Equipment
A271A0
Federal Item Identification Guide (FIIG_4065)
00830
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
9
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Electrostatic Discharge Code (ESD_EMI_CD_2043)
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A502 | 0 | 0 | A | E | CL | TB | 1 Apr 1991 | |||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
0
Acquisition Method Code (AMC_2871)
Not Established
A
Nonconsumable Item Material Support Code (NIMSC_0076)
An activitiy within the Army is providing depot maintenance support.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
CL
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
TB DSOR
Depot Source of Repair Codes (DSOR_0903)
Tobyhanna Army Depot (TYAD), PA
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 6 | CL | D | 4 | PU143UANDPU143AU | 81349 | | |||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
CL
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
4
Reference Number Justification Code (RNJC_2750)
Data on the additional items of production is not available and acceptability of the additional items of production cannot be determined.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | CX | 0 | 2 Aug 1999 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
CX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Richmond, Richmond, VA 23297-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
2 Aug 1999
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Q | 593 | Z | 9 | A | H | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI | 1 |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
Q
Less Than Carload (LCL_CD_2760)
70
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
062120
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34760
Uniform Freight Classification (UFC_CD_MODF_3040)
GENERATORS-MOTORS-PARTS-NOI
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
B16
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
US Army Communications-Electronics, Command and Fort Monmout, Fort Monmouth, NJ 07703-5016
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
L
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: Disposal is not authorized below wholesale/specialized repair activity level; MARINE CORPS: Reparable item. Repair, condemnation, and disposal not authorized below depot/specialized repair activity level; NAVY: Local stock items or items pending national stock number assignment
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | A | 1 | 110.0 lbs | 20in x 14in x 18in | 2.916 cu ft | 0.1 lbs | 0.1in x 0.1in x 0.1in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | AD | X | F2 | 00 | A | 00 | F | F | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
110.0 lbs
Unit Pack Weight (UP_WT_5153)
20in x 14in x 18in
Unit Pack Size (UP_SZ_5154)
2.916 cu ft
Unit Pack Cube (UP_CU_5155)
0.1 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
0.1in x 0.1in x 0.1in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
AD
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Cushion, anchor, block or brace as required.
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
F2
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D6251, Type III, Class 2, overseas cleated plywood box or ASTM-D6880, Class 2, heavy duty nailed wood box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
A
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level A packing protection.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
F
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKPS | Duty Cycle | CONTINUOUS |
| CWGQ | Connection Type And Voltage Rating In Volts | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWGL | Current Rating In Amps | 27.000 SINGLE INPUT |
| ACDC | Current Type | DC INPUT |
| CBBL | Features Provided | HORIZONTAL MOUNTING POSITION |
| FREQ | Frequency In Hertz | 60.0 OUTPUT |
| AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
| AXGY | Mounting Method | FIXED BASE |
| CWDT | Nominal Center To Center Distance Between Mounting Facilities Parallel To Length | 9.062 INCHES |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 6.250 INCHES |
| AAJU | Overall Length | 13.812 INCHES |
| ANPZ | Inclosure Feature | DUSTPROOF |
| CWFX | Rotor Speed Rating In Rpm | 3600.0 SINGLE FULL LOAD |
| AAJT | Overall Height | 9.812 INCHES |
| AAJV | Overall Width | 7.375 INCHES |
| FAAZ | Phase | SINGLE OUTPUT |
| CWDY | Temp Rating | 40.0 AMBIENT DEG CELSIUS |
Back to TopBack to Top
