6130-01-183-3927
POWER SUPPLY
6130-01-183-3927 (6130011833927, 011833927)
Part Numbers (4 listings): G254084-1V1 | 452-700-3 | G254084-1 | PS101167 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| G254084-1V1 | 1 - Source of Control Reference | 3 - Reparable Item | RAYTHEON TECHNICAL SERVICES COMPANY | 3B150 |  |
| 452-700-3 | 3 - Design Control Reference | 3 - Reparable Item | ELDEC CORPORATION | 08748 |  |
| G254084-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | RAYTHEON COMPANY | 49956 |  |
| G254084-1V1 | 5 - Replaced / Discontinued | 9 - No Longer Used | RAYTHEON COMPANY | 49956 | |
| PS101167 | 5 - Replaced / Discontinued | 9 - No Longer Used | EDCO ENGINEERING CORP | 27206 |  |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
3 - Reparable Item
Reference Number Variation Code (DRN_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61 | 6130 | 011833927 | A39900 | 00740 | X | L | B | N | B | A | 0 | 6 Jul 1984 |
61
Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)
Electric Wire, and Power and Distribution Equipment
A39900
Federal Item Identification Guide (FIIG_4065)
00740
Item Naming Code (INC_4080)
6 Jul 1984
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
L
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference - Descriptive Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
B
Electrostatic Discharge Code (ESD_EMI_CD_2043)
Represents items with ESD sensitivity.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FGG4 | 2 | B | F | D | TG | FR | 1 Apr 1991 | |||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
TG
Item Management Coding Activity (IMC_ACTY_2748)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
FR DSOR
Depot Source of Repair Codes (DSOR_0903)
Warner-Robins Air Logistics Center (WR-ALC), Robins AFB, GA
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 2 | MG | G254084-1V1 | 3B150 | | ||||||
| 3 | 3 | 2 | MG | 452-700-3 | 08748 | | ||||||
| 5 | 9 | 2 | MG | B | PS101167 | 27206 | | |||||
| 5 | 9 | 2 | MG | B | G254084-1 | 49956 | | |||||
| 5 | 9 | 2 | MG | B | G254084-1V1 | 49956 | | |||||
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3
Reference Number Variation Code (RNVC_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
MG
Reference Number Action Activity Code (RNAAC_2900)
Engineering Data Support Center, Robbins AFB, GA 31098-5690
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 96 | 0 | 19 Sep 1997 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
96
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
19 Sep 1997
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TG | M | 72D | Z | 9 | A | H | Z | M | 062900 | X | 35110 | RECTIFIERS-NOI-BATTERY-ELIMINATORS |
TG
Originating Activity Code (ORIG_ACTY_CD_4210)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
M
Less Than Carload (LCL_CD_2760)
85
72D
Water Commodity Code (WRT_CMDTY_CD_9275)
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
062900
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
35110
Uniform Freight Classification (UFC_CD_MODF_3040)
RECTIFIERS-NOI-BATTERY-ELIMINATORS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
FLZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
T
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XD2: AF Recoverable Assembly Management System (AFRAMS); NAVY: Terminal Items
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | GX | 1 | 000 | 34.0 lbs | 25in x 15in x 14.5in | 3.146 cu ft | 25.0 lbs | 17in x 7in x 3.5in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | X | NV | 00 | B | 39 | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
GX
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preserve by Method 41 as follows: Items subject to damage by electromagnetic and electrostatic field forces shall be initially wrapped in material conforming to MIL-PRF-81705, Type III, or bags conforming to MIL-DTL-117, Type II, Class H, Style 2, or cushioned in material conforming to A-A-3129, Type I, Grade B or PPP-C-795, Class 2 or PPP-C-1797, Type II, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to MIL-DTL-117, Type I, Class F, Style 1. Reclosable cushioned pouches conforming to MIL-DTL-81997, Type I or II, may be used in lieu of initial wrap or cushioning. Lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. Materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. Electrostatic discharge (ESD) sensitive caution labels shall be applied in accordance with MIL-STD-129.
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
34.0 lbs
Unit Pack Weight (UP_WT_5153)
25in x 15in x 14.5in
Unit Pack Size (UP_SZ_5154)
3.146 cu ft
Unit Pack Cube (UP_CU_5155)
25.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
17in x 7in x 3.5in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
NV
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-1672, Type III, telescoping encapsulated cushioning in reusable box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
39
Special Marking Code (SP_MKG_CD_5169)
ESD sensitive electronic device requirements of MIL-STD-129 apply
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKWC | Electrical Power Source Relationship | OPERATING |
| AGAV | End Item Identification | ALQ184 |
| ADZC | Environmental Protection | SALT SPRAY PROOF |
| AKAE | Maximum Operating Altitude Rating | 50000.0 FEET |
| AYNH | Operating Ambient Temp Range | -54.0/+71.0 DEG CELSIUS |
| CWGH | Output Current Rating | 1.1 AC AMPERES NOMINAL 1ST POWER OUTPUT2.0 DC MILLIAMPERES MINIMUM 2ND POWER OUTPUT AND 3.0 DC MILLIAMPERES MAXIMUM 2ND POWER OUTPUT108.0 DC MILLIAMPERES MINIMUM 3RD POWER OUTPUT AND 109.0 DC MILLIAMPERES MAXIMUM 3RD POWER OUTPUT |
| CWHF | Output Connection Quantity | 8 1ST POWER OUTPUT8 2ND POWER OUTPUT8 3RD POWER OUTPUT |
| CWHJ | Output Connection Type | CONNECTOR, RECEPTACLE 1ST POWER OUTPUTCONNECTOR, RECEPTACLE 2ND POWER OUTPUTCONNECTOR, RECEPTACLE 3RD POWER OUTPUT |
| APTS | Output Frequency Rating | 55.0 KILOHERTZ NOMINAL 1ST POWER OUTPUT |
| CWGN | Output Phase | SINGLE 1ST POWER OUTPUTSINGLE 2ND POWER OUTPUTSINGLE 3RD POWER OUTPUT |
| APPA | Output Voltage Rating | 6.3 AC POUNDS PER HOUR DRY 1ST POWER OUTPUT AND 6.6 AC POUNDS PER HOUR WITH RETAINING CHAIN 1ST POWER OUTPUT-3.9 DC MINOR DRY 2ND POWER OUTPUT AND -3.896 DC MINOR WITH RETAINING CHAIN 2ND POWER OUTPUT1.69 DC MINOR DRY 3RD POWER OUTPUT AND 1.945 DC MINOR WITH RETAINING CHAIN 3RD POWER OUTPUT |
| CWHM | Input Current Rating | 15.0 AC AMPERES MINIMUM 1ST OPERATING POWER RQMT AND 22.0 AC AMPERES MAXIMUM 1ST OPERATING POWER RQMT1.2 DC AMPERES NOMINAL 2ND OPERATING POWER RQMT1.5 DC AMPERES NOMINAL 3RD OPERATING POWER RQMT0.25 DC AMPERES NOMINAL 4TH OPERATING POWER RQMT5.0 DC AMPERES NOMINAL 5TH OPERATING POWER RQMT0.1 DC AMPERES NOMINAL 6TH OPERATING POWER RQMT |
| APNX | Input Voltage Rating | 115.0 AC VOLTS MINIMUM 1ST OPERATING POWER RQMT AND 200.0 AC VOLTS MAXIMUM 1ST OPERATING POWER RQMT64.0 DC VOLTS NOMINAL 2ND OPERATING POWER RQMT28.0 DC VOLTS NOMINAL 3RD OPERATING POWER RQMT15.0 DC VOLTS NOMINAL 4TH OPERATING POWER RQMT5.0 DC VOLTS NOMINAL 5TH OPERATING POWER RQMT-15.0 DC VOLTS NOMINAL 6TH OPERATING POWER RQMT |
| APTQ | Input Frequency Rating | 400.0 HERTZ NOMINAL SINGLE OPERATING POWER RQMT |
| ANPM | Input Phase | THREE SINGLE OPERATING POWER RQMT |
| ZZZY | Reference Number Differentiating Characteristics | SOURCE CONTROLED |
| CWGZ | Ripple Voltage At Full Load | 0.2 VOLTS RMS 2ND POWER OUTPUT AND 1.6 VOLTS RMS 2ND POWER OUTPUT1.0 VOLTS RMS 3RD POWER OUTPUT AND 10.0 VOLTS RMS 3RD POWER OUTPUT |
| ABHP | Overall Length | 16.600 INCHES NOMINAL |
| ABMK | Overall Width | 7.000 INCHES NOMINAL |
| FEAT | Special Features | OUTPUT VOLTAGES AND CURRENT ARE GIVEN FOR OPERATING ONE TWT. THIS POWER SUPPLY OPERATES 8 DIFFERENTTWT'S. OVERCURRENT PROTECTION CIRCUIT,RELAY RESET WHEN POWER IS CYCLED ON AND OFF. |
| CWKG | Ventilation Design Type | CONVECTION |
Back to TopBack to Top
