Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
GM805EP1 | 3 - Design Control Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
153C0-1DCMA | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PRIME TECHNOLOGY, LLC | 0BHF9 | |
C291548-3 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 06845 | |
291548-3 | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 06845 | |
0291548-003 | 5 - Replaced / Discontinued | 2 - Production Item | GOODRICH ACTUATION SYSTEMS BUCVERNON | F1688 | |
662715-001 | 5 - Replaced / Discontinued | 2 - Production Item | GOODRICH ACTUATION SYSTEMS BUCVERNON | F1688 | |
662715-1 | 5 - Replaced / Discontinued | 2 - Production Item | GOODRICH ACTUATION SYSTEMS BUCVERNON | F1688 | |
153C0-1DCMA | 5 - Replaced / Discontinued | 2 - Production Item | IV-ELECTRONIC KLAUS VESPERMANN KG | C7407 | |
153C0-1DCMA | 5 - Replaced / Discontinued | 9 - No Longer Used | PRIME TECHNOLOGY INC | 81030 | |
662715-001 | 5 - Replaced / Discontinued | 9 - No Longer Used | LUCAS FRANCE SA DIV AEROSPACE FRANCE | F6103 | |
662715-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | LUCAS FRANCE SA DIV AEROSPACE FRANCE | F6103 | |
0291548-003 | 5 - Replaced / Discontinued | 9 - No Longer Used | LUCAS FRANCE SA DIV AEROSPACE FRANCE | F6103 | |
153C001X2 | C - Advisory Reference | 1 - Incomplete Part Number | PRIME TECHNOLOGY, LLC | 0BHF9 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
66 | 6625 | 000278582 | A310A0 | 16450 | X | 1 | A | P | A | 0 | 1 Jan 1961 |
Electrical and Electronic Properties Measuring and Testing Instruments
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZW01 | 1 Dec 1995 | |||||||||||||||||||||||||||||
YA01 | 1 Aug 2000 | |||||||||||||||||||||||||||||
FGGX | FGTX | 1 | L | Z | TG | 1 Jul 2005 | ||||||||||||||||||||||||
N9BN | N9ND | 1 | L | Z | KE | KE | 1 Jul 2005 | |||||||||||||||||||||||
ZF01 | 1 May 2015 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
Naval ICP, Philadelphia, PA 19111
Naval ICP, Philadelphia, PA 19111
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 5 | TX | D | GM805EP1 | 26512 | |||||
5 | 1 | 5 | TX | 153C0-1DCMA | 0BHF9 | |||||||
3 | 5 | 2 | 5 | TX | D | 291548-3 | 06845 | |||||
3 | 5 | 2 | 5 | TX | D | C291548-3 | 06845 | |||||
4 | 5 | 2 | 5 | TX | A | 153C0-1DCMA | C7407 | |||||
5 | 2 | 5 | TX | D | 0291548-003 | F1688 | ||||||
5 | 2 | 5 | TX | D | 662715-001 | F1688 | ||||||
5 | 2 | 5 | TX | D | 662715-1 | F1688 | ||||||
4 | 5 | 9 | 5 | TX | D | 0291548-003 | F6103 | |||||
3 | 5 | 9 | 5 | TX | D | 662715-001 | F6103 | |||||
3 | 5 | 9 | 5 | TX | D | 662715-1 | F6103 | |||||
1 | 5 | 9 | 5 | TX | B | 153C0-1DCMA | 81030 | |||||
C | 1 | 5 | ZZ | AC | 153C001X2 | 0BHF9 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
USA
Navy
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | TX | 0 | 5 Nov 1972 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
657 | Z | 9 | A | H | Z | W | 136740 | Z | 68820 | METERS-ELEC-PARTS |
Instruments, Electric Meter
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Unclassified
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
SEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 51 | 1 | AAA | 0.001 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | JA | BG | X | D1 | 00 | Q | Q | U | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
A-A-3174, plastic sheet, polyolefin, 2 mil
A-A-1898, Grade II, water resistant cellulosic cushioning
As required to protect the item or elements of the package
PPP-B-566 or PPP-B-676, folding or setup box.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
APPN | Accuracy In Percent | -3.0/+3.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
AQFY | Background Color | WHITE SINGLE INDICATOR SINGLE RANGE |
ABKQ | Center To Center Distance Between Mounting Facilities Parallel To Length | 1.312 INCHES NOMINAL |
ABKR | Center To Center Distance Between Mounting Facilities Parallel To Width | 1.312 INCHES NOMINAL |
CTTD | Circuit Attachment Method And Quantity | 2 SOLDER LUG |
AACT | Circuit Current For Which Designed | DC |
APMM | Dial Scale Marking Color | BLACK SINGLE INDICATOR SINGLE RANGE |
CBBL | Features Provided | ZERO ADJUSTER |
ZZZV | Fsc Application Data | TEST SET,ELECT. EQUIP. |
BHMW | Measurement Range | +0.0 TO 1.0 MILLIAMPERES, DC SINGLE INDICATOR SINGLE RANGE |
APSW | Meter Body Diameter Behind Mounting Flange | 1.500 INCHES NOMINAL |
APST | Meter Depth Behind Mounting Flange | 1.084 INCHES MAXIMUM |
ANRL | Mounting Arrangement Style | FOUR HOLE/STUD RECTANGULAR/SQUARE |
ABTB | Mounting Hole Diameter | 0.125 INCHES NOMINAL |
AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
CTQL | Movement Suspension Method | JEWEL PIVOT BASE |
AQEC | Movement Type | MOVING COIL, PERMANENT MAGNET |
NHCF | Nuclear Hardness Critical Feature | NONHARDENED |
AMQY | Installation Design | PANEL |
AMKD | Indicator Type | DIAL W/POINTER |
ASSS | Pointer Color | BLACK SINGLE INDICATOR SINGLE RANGE |
AWZJ | Power Source | EXTERNAL |
BHDC | Scale Graduation Type | LINEAR SINGLE INDICATOR SINGLE RANGE |
ABWG | Scale Division Quantity | 25 SINGLE INDICATOR SINGLE RANGE |
ANTG | Sensitivity Rating | 17.0 MILLIVOLTS |
ABKW | Overall Height | 1.750 INCHES NOMINAL |
ABHP | Overall Length | 1.382 INCHES MAXIMUM |
ABMK | Overall Width | 1.750 INCHES NOMINAL |
APSN | Panel For Which Designed | NONMAGNETIC |
BHSX | Circuit Construction Type | UNABLE TO DECODE |
STYL | Style Designator | RECTANGULAR FLUSH MTG |