Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
1268867 | 3 - Design Control Reference | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 | |
125R | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SIMPSON ELECTRIC COMPANY | 55026 | |
221HRW/ZA | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | TRIPLETT BLUFFTON CORPORATION | 60741 | |
R230 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | IDEAL PRECISION METER CO | 11707 | |
628E | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PHAOSTRON INSTRUMENT AND ELECTRONIC | 77221 | |
628 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PHAOSTRON INSTRUMENT AND ELECTRONIC | 77221 | |
621V | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PHAOSTRON INSTRUMENT AND ELECTRONIC | 77221 | |
621 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PHAOSTRON INSTRUMENT AND ELECTRONIC | 77221 | |
210-10390 | 5 - Replaced / Discontinued | 2 - Production Item | PHAOSTRON INSTRUMENT AND ELECTRONIC | 77221 | |
265-989 | 5 - Replaced / Discontinued | 2 - Production Item | JEWELL INSTRUMENTS, LLC | 15309 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
66 | 6625 | 000345064 | A310A0 | 61955 | X | 1 | Q | P | A | 0 | 1 Jan 1963 |
Electrical and Electronic Properties Measuring and Testing Instruments
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
CCLI — Commerce Control List Item Demilitarization not required. CCLI are dual-use (military, commercial, and other strategic uses) items under the jurisdiction of the Bureau of Export Administration, U.S. Department of Commerce, through the Export Administration Regulations. The types of items under the Commerce Control List (CCL) are commodities (i.e., equipment, materials, electronics, propulsion systems, etc.), software, and technology. The CCL does not include those items exclusively controlled by another department or agency of the U.S. Government.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
ZU01 | 1 Aug 2005 | |||||||||||||||||||||||||||||
FGGX | FGTX | 1 | C | Z | TG | 1 Apr 2006 | ||||||||||||||||||||||||
N9BN | N9ND | 1 | C | Z | HD | HD | 1 Apr 2006 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | A | TX | D | 1268867 | 10001 | |||||
5 | 1 | E | TX | R230 | 11707 | |||||||
5 | 1 | E | TX | 125R | 55026 | |||||||
5 | 1 | E | TX | 221HRW/ZA | 60741 | |||||||
5 | 1 | E | TX | 621 | 77221 | |||||||
5 | 1 | E | TX | 621V | 77221 | |||||||
5 | 1 | E | TX | 628 | 77221 | |||||||
5 | 1 | E | TX | 628E | 77221 | |||||||
3 | 5 | 2 | E | TX | D | 210-10390 | 77221 | |||||
5 | 2 | E | TX | 265-989 | 15309 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | TX | 0 | 1 Jul 1966 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
657 | Z | 9 | A | H | Z | W | 136740 | Z | 68820 | METERS-ELEC-PARTS |
Instruments, Electric Meter
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Unclassified
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 42 | 1 | AAA | 0.5 lbs | 0.001 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | NA | X | DO | 00 | Q | Q | U | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Container, watervaporproof bag, sealed, container
Any suitable process that is not injurious to the item.
No requirement
No requirement
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
As required to protect the item or elements of the package
Any suitable fiber box included in this table may be used (see J.4.9.1).
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
APPN | Accuracy In Percent | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES |
AQFY | Background Color | WHITE SINGLE INDICATOR ALL RANGES |
CTTD | Circuit Attachment Method And Quantity | 2 SOLDER LUG AND 2 THREADED STUD |
AACT | Circuit Current For Which Designed | DC |
APMM | Dial Scale Marking Color | GREEN SINGLE INDICATOR ALL RANGES AND RED SINGLE INDICATOR ALL RANGES |
AAPB | Dielectric Withstanding Voltage In Volts | 3000.0 |
AKYN | Furnished Items And Quantity | NUT 7; LOCKWASHER 5; SEAL 1 |
ADZC | Environmental Protection | SHOCK RESISTANT AND VIBRATION RESISTANT |
CBBL | Features Provided | MAGNETIC SHIELD AND ZERO ADJUSTER |
MATT | Material | STEEL |
APSW | Meter Body Diameter Behind Mounting Flange | 2.210 INCHES MAXIMUM |
APST | Meter Depth Behind Mounting Flange | 1.600 INCHES MAXIMUM |
ANRL | Mounting Arrangement Style | THREE HOLE/STUD BOLT CIRCLE |
AFFL | Mounting Bolt Circle Diameter | 2.440 INCHES NOMINAL |
ABTB | Mounting Hole Diameter | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
AXHR | Mounting Facility Type And Quantity | 3 SCREW AND 3 UNTHREADED HOLE |
CTQL | Movement Suspension Method | JEWEL PIVOT BASE |
AQEC | Movement Type | MOVING COIL, PERMANENT MAGNET |
NHCF | Nuclear Hardness Critical Feature | NONHARDENED |
ZZZV | Fsc Application Data | TEST SETS,ELECTRONIC SYSTEMS,EXCEPT SPECIALLY DESIGNED |
AMQY | Installation Design | PANEL |
AMKD | Indicator Type | DIAL W/POINTER |
ASSS | Pointer Color | BLACK SINGLE INDICATOR ALL RANGES |
BHDC | Scale Graduation Type | NONLINEAR SINGLE INDICATOR ALL RANGES |
ASTW | Scale Marking | CIRCUIT SAFE; SAFE VOLTS; CK; CAL WITH EXTENDED LINE; TWO GREEN AND RED BANDS |
ANTG | Sensitivity Rating | 1.0 MILLIAMPERES |
ADAV | Overall Diameter | 2.695 INCHES MAXIMUM |
ABHP | Overall Length | 2.650 INCHES MAXIMUM |
APSN | Panel For Which Designed | MAGNETIC OR NONMAGNETIC |
MARK | Special Markings | CIRCUIT SAFE SCALE,RED BAR FROM L TO R 0.0 TO 0.50 GREEN BAR FROM L TO R 0.50 TO 1.0 MA DEFLECTION; SAFE VOLTS,GREEN BAR FROM 0.0 TO 0.10,RED BAR FROM 0.10 TO 1.0 MA DEFLECTION; CK AT 0.44 TO 0.56 MA DEFLECTION; EXTENDED LINE AT FULL SCALE MARKED CAL |
SPCL | Special Test Features | COMPLIES WITH MIL-M-10304 |
FEAT | Special Features | RUGGEDIZED |
STYL | Style Designator | ROUND FLUSH MTG |
SFTT | Surface Treatment | CHROMATE AND ENAMEL SEMIGLOSS |