6625-00-305-1395
OSCILLOSCOPE
6625-00-305-1395 (6625003051395, 003051395)
Part Numbers (3 listings): 434 | 668419323005 | 426-6310 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 434 | 3 - Design Control Reference | 2 - Production Item | TEKTRONIX, INC. | 80009 |  |
| 668419323005 | 5 - Replaced / Discontinued | 9 - No Longer Used | NCB HUNGARY HONVEDSEGI EGYSEGES | 0000V |  |
| 426-6310 | 6 - Informative Reference | 9 - No Longer Used | PAEAEESIKUNTA | A486G | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6 - Informative Reference
Reference Number Category Code (DRN_2910)
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 66 | 6625 | 003051395 | T320-G | 00357 | X | M | 6 | B | P | U | 17 Oct 1973 |
6625
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Electrical and Electronic Properties Measuring and Testing Instruments
T320-G
Federal Item Identification Guide (FIIG_4065)
00357
Item Naming Code (INC_4080)
17 Oct 1973
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
M
Type of Item Identification (TYP_II_4820)
Partial Descriptive - Reference Item Identification (Type 1A Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZK01 | 1 Nov 1993 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| ZF01 | 1 Mar 1998 | |||||||||||||||||||||||||||||
| FGG4 | FEE4 | 3 | H | F | D | FK | 1 Feb 2001 | |||||||||||||||||||||||
| NSGS | NSES | 3 | H | 3 | E | FR | GG | 1 Feb 2001 | ||||||||||||||||||||||
| YA01 | 1 Jan 2002 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 2002 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| WH01 | 1 May 2006 | |||||||||||||||||||||||||||||
| ZX01 | 1 Mar 2008 | |||||||||||||||||||||||||||||
| ZU01 | 1 Mar 2008 | |||||||||||||||||||||||||||||
| WF01 | 1 Jul 2009 | |||||||||||||||||||||||||||||
| ZM01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
H
Acquisition Method Suffix Code (AMSC_2876)
The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
3
Nonconsumable Item Material Support Code (NIMSC_0076)
End Item Primary Inventory Control Activity. This code identifies SICA managed end items or equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority and depot maintenance, if required, to be provided by DMISA. Supply support requirements will be submitted by the SICA to the PICA on MIPRs unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions for SICA activities. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
FR DSOR
Depot Source of Repair Codes (DSOR_0903)
Warner-Robins Air Logistics Center (WR-ALC), Robins AFB, GA
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 4 | SB | D | 434 | 80009 | | ||||
| 4 | 5 | 9 | 9 | WH | B | 668419323005 | 0000V | | ||||
| 4 | 6 | 9 | 9 | WF | B | 426-6310 | A486G | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
9
Document Availability Code (DAC_2640)
The reference number is of the type for which an indication of document availability is not required.
WH
Reference Number Action Activity Code (RNAAC_2900)
Hungary
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
6
Reference Number Category Code (RNCC_2910)
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
WF
Reference Number Action Activity Code (RNAAC_2900)
Finland
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 98 | 0 | 1 Feb 1975 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
98
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Feb 1975
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SE | P | 738 | 3 | 9 | A | H | Q | J | 061700 | X | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
SE
Originating Activity Code (ORIG_ACTY_CD_4210)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
P
Less Than Carload (LCL_CD_2760)
77.5
738
Water Commodity Code (WRT_CMDTY_CD_9275)
Computing Equipment, Computer Components, and Circuit Cards
3
Type Cargo Code (TYPE_CGO_CD_9260)
Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Q
Air Special Handling Code (AIR_CMTY_HDLG_9215)
Extremely fragile items including delicate instruments.
J
Less Than Truckload (CLAS_RTNG_CD_2770)
100.2
061700
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34580
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-APPLIANCES-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
FLZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
S
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC ND2: AF Equipment Management System (AFEMS); NAVY: Slow Demand Velocity Items (Consumables)
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
H
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or uneconomically repairable, then dispose at intermediate level; COAST GUARD: Reparable item. Repair, condemnation, and disposal not authorized below intermediate (district) level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at fourth echelon level; NAVY: Depot Level Reparable
B16
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
US Army Communications-Electronics, Command and Fort Monmout, Fort Monmouth, NJ 07703-5016
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
D
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: When repair is beyond lower level maintenance capability, evacuate the item to depot. Disposal is not authorized below wholesale level; MARINE CORPS: Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level; NAVY: Field Level Reparables
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | S | 52 | 1 | 000 | 26.0 lbs | 2.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | GB | LK | 0 | FC | 00 | A | 03 | F | F | F | M |
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 51 | 1 | 000 | 51.7 lbs | 32.5in x 18.5in x 17in | 5.915 cu ft | 27.0 lbs | 19in x 7in x 13in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | X | NV | 00 | B | 17 |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
S
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Secondary Inventory Control Activity (SICA)
52
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
51
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
26.0 lbs
Unit Pack Weight (UP_WT_5153)
2.000 cu ft
Unit Pack Cube (UP_CU_5155)
51.7 lbs
Unit Pack Weight (UP_WT_5153)
32.5in x 18.5in x 17in
Unit Pack Size (UP_SZ_5154)
5.915 cu ft
Unit Pack Cube (UP_CU_5155)
27.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
19in x 7in x 13in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
GB
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, greaseproof, waterproof barrier
LK
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Wood blocking and bracing, fasteners, or steel strapping, for tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing.
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
FC
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D6880, Class 2, heavy duty wood box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
A
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level A packing protection.
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
F
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Packing is not required; the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
NV
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-1672, Type III, telescoping encapsulated cushioning in reusable box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
17
Special Marking Code (SP_MKG_CD_5169)
Reusable container
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKYD | Accessory Components And Quantity | PROBES 2,ACCESSORY POUCH 1 |
| BHDD | Amplifier Deflection Sensitivity Provision | NOT PROVIDED |
| BHDT | Amplifier Input Impedance Rating Provision | PROVIDED |
| ATES | Beam Quantity | 1 |
| BHFF | Calibrated Screen Scale | INCLUDED |
| BHFT | Camera Recording Device Accommodation | PROVIDED |
| ACDC | Current Type | AC |
| BHDP | Frequency Response Rating | PROVIDED |
| AWEC | Graduation Interval | GRADUATED IN V/CM BOTH AXIS |
| BGQM | Generator Driven Feature | INCLUDED |
| AXGY | Mounting Method | CARRYING CASE |
| BHDH | Input Intensity Modulation Feature | PROVIDED |
| BGQK | Screen Size | 5;000 IN. |
| ABKW | Overall Height | 5.750 INCHES NOMINAL |
| ABHP | Overall Length | 18.700 INCHES NOMINAL |
| ABMK | Overall Width | 13.000 INCHES NOMINAL |
| FAAZ | Phase | SINGLE |
| BHDJ | Visual Modulation Sensitivity Voltage Rating | 5.0 VOLTS NOMINAL |
| AMSE | Voltage Rating | 100.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM |
| BHFM | Writing Gun Accelerating Voltage | 4.0 KILOVOLTS |
| BHFL | Writing Gun Quantity | 1 |
| BHDW | X-Axis Input Impedance Rating | 1.0 MEGOHMS NOMINAL |
| BHDX | Y-Axis Input Impedance Rating | 1.0 MEGOHMS NOMINAL |
| BHDY | Z-Axis Input Impedance Rating | 0.0 OHMS MINIMUM AND 20.0 MEGOHMS MAXIMUM |
| BHFK | Storage Potential | CONTINUOUSLY ADJUSTABLE TO PROVIDE OPTIMUM |
| BGQN | Sweep Circuit Type | HORIZONTAL AND VERTICAL |
| BGQL | Sweep Circuits | INCLUDED |
| BHFR | Trace Erasing Provision | PROVIDED |
| BHFH | Trace Storage Tube | INCLUDED |
Back to TopBack to Top
