6625-01-172-0130
TEST SET,RELAY
6625-01-172-0130 (6625011720130, 011720130)
Part Numbers (2 listings): 16U42545-3 | GR-16U42545-3 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 16U42545-3 | 3 - Design Control Reference | 2 - Production Item | BAE SYSTEMS INFORMATION AND | 94117 |  |
| GR-16U42545-3 | 5 - Replaced / Discontinued | 2 - Production Item | BOSA S.A. | G1645 |  |
| 16U42545-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | LOCKHEED MARTIN CORPORATION | 81755 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 66 | 6625 | 011720130 | T228-A | 03667 | X | 1 | B | P | A | 0 | 15 Feb 1984 |
6625
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Electrical and Electronic Properties Measuring and Testing Instruments
T228-A
Federal Item Identification Guide (FIIG_4065)
03667
Item Naming Code (INC_4080)
15 Feb 1984
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| FGG4 | FEE4 | 2 | G | F | D | FR | 1 Sep 2000 | |||||||||||||||||||||||
| NAGS | NMGS | 2 | G | 3 | D | FR | GG | 1 Aug 2003 | ||||||||||||||||||||||
| ZR01 | 1 Dec 2007 | |||||||||||||||||||||||||||||
| ZU01 | 1 Mar 2008 | |||||||||||||||||||||||||||||
| WP01 | 1 Jun 2012 | |||||||||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
3
Nonconsumable Item Material Support Code (NIMSC_0076)
End Item Primary Inventory Control Activity. This code identifies SICA managed end items or equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority and depot maintenance, if required, to be provided by DMISA. Supply support requirements will be submitted by the SICA to the PICA on MIPRs unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions for SICA activities. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
FR DSOR
Depot Source of Repair Codes (DSOR_0903)
Warner-Robins Air Logistics Center (WR-ALC), Robins AFB, GA
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 16U42545-3 | 94117 | | ||||||
| 4 | 5 | 2 | 3 | ZU | A | GR-16U42545-3 | G1645 | | ||||
| 5 | 9 | 5 | SB | B | 16U42545-3 | 81755 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZU
Reference Number Action Activity Code (RNAAC_2900)
Greece
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 15 Feb 1984 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
15 Feb 1984
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SE | D | 738 | 3 | 9 | A | H | Q | J | 061700 | X | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI | 1 |
SE
Originating Activity Code (ORIG_ACTY_CD_4210)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
D
Less Than Carload (LCL_CD_2760)
200
738
Water Commodity Code (WRT_CMDTY_CD_9275)
Computing Equipment, Computer Components, and Circuit Cards
3
Type Cargo Code (TYPE_CGO_CD_9260)
Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Q
Air Special Handling Code (AIR_CMTY_HDLG_9215)
Extremely fragile items including delicate instruments.
J
Less Than Truckload (CLAS_RTNG_CD_2770)
100.2
061700
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34580
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-APPLIANCES-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
FLZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
S
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC ND2: AF Equipment Management System (AFEMS); NAVY: Slow Demand Velocity Items (Consumables)
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
X
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
NAVY: Special Program Reparables
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | S | A | DW | 1 | 000 | 32in x 31in x 20in | 11.481 cu ft | 60.0 lbs |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | K3 | GH | M | DR | 00 | B | 03 | Q | F | F | M |
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | Z | 000 | 80.0 lbs | 27.4in x 26.4in x 21.8in | 9.125 cu ft | 60.0 lbs | 25.4in x 24.7in x 18in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | ZZ | ZZ | Z | ZZ | 00 | B | ZZ | A |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
S
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Secondary Inventory Control Activity (SICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
DW
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preserve by Method 52 as follows: Item shall be cleaned, wrapped, blocked and braced in an interior carton fabricated in accordance with ASTM-D5118, Class domestic. MIL-PRF-131 barrier material, sealed as required, shall be utilized around the first container. The cushioning, to be specified under the cushioning code and in the thickness required to adequately protect the item, shall be placed between the barrier and the outer container.
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
Z
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Special Requirements - See specific instructions or drawings provided.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
32in x 31in x 20in
Unit Pack Size (UP_SZ_5154)
11.481 cu ft
Unit Pack Cube (UP_CU_5155)
60.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
80.0 lbs
Unit Pack Weight (UP_WT_5153)
27.4in x 26.4in x 21.8in
Unit Pack Size (UP_SZ_5154)
9.125 cu ft
Unit Pack Cube (UP_CU_5155)
60.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
25.4in x 24.7in x 18in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
K3
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-81705, Type III, Class 1, transparent, electrostatic protective, static shielding, barrier material or MIL-DTL-117, Type II, Class H, Style 2 bag
GH
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
MIL-PRF-26514, Type I, Class 2, Grade C, flexible polyurethane foam, heavy load range
M
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
3 inches thick
DR
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5168, Class 2, weather resistant triple wall fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Packing is not required; the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
ZZ
Wrapping Material Code (WRAP_MAT_CD_5163)
Special requirements – see specific instructions or drawings provided
ZZ
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Special requirements. See specific instructions or drawings provided.
Z
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Special requirements-See specific instructions or drawings provided
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
A
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Packaging is in accordance with a procedural specification or a SPI. The appropriate specification number will be shown in-the-clear in the supplemental data area.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AQXY | Test Type For Which Designed | AIRCRAFT RELAYS |
| ANPZ | Inclosure Feature | MULTIPLE ITEM W/CARRYING CASE |
| HGTH | Height | 21.750 INCHES NOMINAL |
| ABRY | Length | 23.750 INCHES NOMINAL |
| ABGL | Width | 22.750 INCHES NOMINAL |
| FEAT | Special Features | CONSISTS OF A CHASSIS ASSEMBLY MOUNTED IN THE LOWER HALF OF THE TEST EQUIPMENT INSTRUMENT CASE AND INTERCONNECT CABLES STOWED IN THE LID HALF OF THE CASE; THE FRONT PANEL, WHICH CONTAINS TEST RECEPTACLES, SWITCHES, INDICATORS, TEST JACKS AND THE POWER CABLE RECEPTACLE, IS SECURED INTO THE CHASSIS BY SCREWS; CASE IS PORTABLE AND FITTED WITH CARRING HANDLES AND LOCKING FASTENERS; LID IS DETACHED BY OPENING 180 DEGREES AND REMOVING FROM THE CASE BACK HINGE |
| AGAV | End Item Identification | F-16A/B AIRCRAFT AGE |
| SUPP | Supplementary Features | MANUFACTURERS NAME: AIRCRAFT RELAY TEST SET; TECH ORDER 33D7-18-12-1 |
| RDAL | Reference Data And Literature | TO 33D7-18-12-1 |
Back to TopBack to Top
