6625-01-223-8356
GENERATOR,SIGNAL
6625-01-223-8356 (6625012238356, 012238356)
Part Number (1 listing): 3336B
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 3336B | 3 - Design Control Reference | 2 - Production Item | AGILENT TECHNOLOGIES, INC. | 1LQK8 |  |
| 3336B | 5 - Replaced / Discontinued | 2 - Production Item | HEWLETT-PACKARD LTD | K3464 |  |
| 3336B | 5 - Replaced / Discontinued | 9 - No Longer Used | HEWLETT PACKARD CO | 28480 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 66 | 6625 | 012238356 | T320-J | 03901 | X | 1 | A | P | A | A | 0 | 7 Jan 1986 |
6625
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Electrical and Electronic Properties Measuring and Testing Instruments
T320-J
Federal Item Identification Guide (FIIG_4065)
03901
Item Naming Code (INC_4080)
7 Jan 1986
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Electrostatic Discharge Code (ESD_EMI_CD_2043)
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| FGG4 | FEE4 | 2 | Z | F | D | FR | 1 Sep 2000 | |||||||||||||||||||||||
| NSGS | NSES | 2 | Z | 1 | D | 00 | GG | 1 Sep 2000 | ||||||||||||||||||||||
| BTG1 | 2 | Z | 5 | 88 | 1 May 2008 | |||||||||||||||||||||||||
| YA01 | 1 Jan 2011 | |||||||||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
Z
Acquisition Method Suffix Code (AMSC_2876)
This part is a commercial/non-developmental/off-the-shelf-item. Valid AMCs: 1, 2, 3, 4 and 5.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
1
Nonconsumable Item Material Support Code (NIMSC_0076)
Exception Item (End Item of Equipment). This code identifies SICA managed end items of equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority. Supply support requirements will be submitted by the SICA to the PICA on Military Interdepartmental Purchase Requests (MIPRs) unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions in support of SICA activities and has retained depot repair capability where applicable. Retention of depot maintenance capability for end items of equipment requires documented justification by the SICA to the PICA via JLC Form 19. If PICA and SICA cannot reach an agreement the documentation will be forwarded to the joint MISMOs for a decision. The SICA Catalog Management Data (CMD) will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the Defense Automatic Addressing System Integrated Materiel Manager (DAAS IMM) field.
5
Nonconsumable Item Material Support Code (NIMSC_0076)
Depot Reparable Component (Type II). This code identifies SICA managed depot reparable components assigned to another service which is responsible for the logistics functions of single submitter cataloger, acquisition and disposal authority, depot maintenance, and performs the wholesale stock, store, and issue functions and establishes, budgets, and funds the wholesale stock level requirement. Supply requirements will be submitted to the PICA on requisitions which are funded by a designated point within the SICA. Unserviceable SICA assets will normally be returned to the PICA for credit. The SICA will provide item/program data required by the PICA to meet the materiel support commitments. Normally, Military Interdepartmental Purchase Requests (MIPR) will not be requested by the PICA to support SICA NIMSC 5 requirements. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
FR DSOR
Depot Source of Repair Codes (DSOR_0903)
Warner-Robins Air Logistics Center (WR-ALC), Robins AFB, GA
00 DSOR
Depot Source of Repair Codes (DSOR_0903)
Consumable Item or Ammunition
88 DSOR
Depot Source of Repair Codes (DSOR_0903)
For agencies excluded from the DSOR program. Not for DoD Service's use.
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 4 | ZZ | 3336B | 1LQK8 | | ||||||
| 4 | 5 | 2 | 2 | ZK | D | 3336B | K3464 | | ||||
| 5 | 9 | 4 | SB | B | 3336B | 28480 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
ZK
Reference Number Action Activity Code (RNAAC_2900)
United Kingdom
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 7 Jan 1986 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
7 Jan 1986
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SE | J | 658 | Z | 9 | Z | V | Z | F | 061700 | D | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
SE
Originating Activity Code (ORIG_ACTY_CD_4210)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
J
Less Than Carload (LCL_CD_2760)
100.2
658
Water Commodity Code (WRT_CMDTY_CD_9275)
Electical Appliances, Small
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
Z
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation, but does exceed 72 inches in one or more dimensions.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
F
Less Than Truckload (CLAS_RTNG_CD_2770)
150
061700
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
D
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34580
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-APPLIANCES-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
FLZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
U
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC NF2: AF Equipment Management System (AFEMS); NAVY: Fast moving centrally managed 1I COG forms (locally procured at selected designated overseas activities)
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
H
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or uneconomically repairable, then dispose at intermediate level; COAST GUARD: Reparable item. Repair, condemnation, and disposal not authorized below intermediate (district) level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at fourth echelon level; NAVY: Depot Level Reparable
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | S | 51 | 1 | 000 | 28.0 lbs | 2.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | JA | LK | 0 | F2 | 00 | A | 03 | F | F | F | M |
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 51 | 1 | 29.0 lbs | 30.5in x 20.5in x 12.5in | 4.522 cu ft | 22.0 lbs | 19.7in x 16.8in x 5.3in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | JA | NA | X | ED | 00 | B | 19 | O |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
S
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Secondary Inventory Control Activity (SICA)
51
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
28.0 lbs
Unit Pack Weight (UP_WT_5153)
2.000 cu ft
Unit Pack Cube (UP_CU_5155)
29.0 lbs
Unit Pack Weight (UP_WT_5153)
30.5in x 20.5in x 12.5in
Unit Pack Size (UP_SZ_5154)
4.522 cu ft
Unit Pack Cube (UP_CU_5155)
22.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
19.7in x 16.8in x 5.3in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
JA
Wrapping Material Code (WRAP_MAT_CD_5163)
A-A-3174, plastic sheet, polyolefin, 2 mil
LK
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Wood blocking and bracing, fasteners, or steel strapping, for tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing.
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
F2
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D6251, Type III, Class 2, overseas cleated plywood box or ASTM-D6880, Class 2, heavy duty nailed wood box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
A
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level A packing protection.
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
F
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Packing is not required; the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
JA
Wrapping Material Code (WRAP_MAT_CD_5163)
A-A-3174, plastic sheet, polyolefin, 2 mil
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
ED
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
19
Special Marking Code (SP_MKG_CD_5169)
Method 50 reusable container
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BHFZ | Calibrated Signal Output Range | 75-600 OHMS OUTPUT W/AMPLITUDE OF72.9-78.2 DB |
| ACDC | Current Type | AC |
| AFGQ | Frequency Range Rating | +0.000/+20.099 MEGAHERTZ |
| ACZB | Frequency Rating | 48.0 HERTZ MINIMUM AND 66.0 HERTZ MAXIMUM |
| ABKW | Overall Height | 5.250 INCHES NOMINAL |
| ABHP | Overall Length | 19.625 INCHES NOMINAL |
| ABMK | Overall Width | 16.750 INCHES NOMINAL |
| AMSE | Voltage Rating | 100.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM |
Back to TopBack to Top
