6635-00-822-7296
TESTER,SPRING RESILIENCY
6635-00-822-7296 (6635008227296, 008227296)
Part Numbers (7 listings): DG500W/MT500HS2B2 | BTC-FR2.5TN.D09 | MST-500 | EL6-500 | PB5A500 | DG500W/MT500HS1B2 | 200135717 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| DG500 W/MT500HS2B2 | 3 - Design Control Reference | 2 - Production Item | WILLRICH PRECISION INSTRUMENT CO INC | 9S016 |  |
| BTC-FR2.5TN.D09 | 5 - Replaced / Discontinued | 2 - Production Item | ZWICK USA, LP | 3X4R5 | |
| MST-500 | 5 - Replaced / Discontinued | 2 - Production Item | AMETEK INC. | 11710 | |
| EL6-500 | 5 - Replaced / Discontinued | 2 - Production Item | LINK ENGINEERING CO | 36403 | |
| PB5A500 | 5 - Replaced / Discontinued | 9 - No Longer Used | LINK ENGINEERING CO | 36403 | |
| DG500 W/MT500HS1B2 | 5 - Replaced / Discontinued | 9 - No Longer Used | WILLRICH PRECISION INSTRUMENT CO INC | 9S016 | |
| 200135717 | 7 - Vendor Item Drawing Reference | 2 - Production Item | WARNER ROBINS AIR LOGISTICS CENTER | 98752 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 66 | 6635 | 008227296 | T398-H | 13502 | X | 1 | A | N | A | 1 Jan 1962 |
T398-H
Federal Item Identification Guide (FIIG_4065)
13502
Item Naming Code (INC_4080)
1 Jan 1962
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| FGG4 | FEE4 | 1 | G | X | D | 99 | 1 Sep 2000 | |||||||||||||||||||||||
| NAGS | NAES | 1 | G | 3 | E | FR | GG | 1 Sep 2000 | ||||||||||||||||||||||
| YA01 | 1 Oct 2000 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 2008 | |||||||||||||||||||||||||||||
| WP01 | 1 Jun 2011 | |||||||||||||||||||||||||||||
| ZX01 | 1 Jan 2014 | |||||||||||||||||||||||||||||
| YD01 | 1 Sep 2016 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
X
Nonconsumable Item Material Support Code (NIMSC_0076)
All other conditions.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
3
Nonconsumable Item Material Support Code (NIMSC_0076)
End Item Primary Inventory Control Activity. This code identifies SICA managed end items or equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority and depot maintenance, if required, to be provided by DMISA. Supply support requirements will be submitted by the SICA to the PICA on MIPRs unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions for SICA activities. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
99 DSOR
Depot Source of Repair Codes (DSOR_0903)
Depot source of repair has not been assigned. This is a temporary code that will be used only until a DSOR is assigned as specified in joint Service regulation AMC-R 750û10, OPNAVINST 4790.14A AFI 21û133(I), MCO P4790.10B, DLAD 4151.16, Joint Depot Maintenance Program, 31 March 1999.
FR DSOR
Depot Source of Repair Codes (DSOR_0903)
Warner-Robins Air Logistics Center (WR-ALC), Robins AFB, GA
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 4 | ZZ | DG500 W/MT500HS2B2 | 9S016 | | ||||||
| 4 | 5 | 2 | 4 | SB | D | MST-500 | 11710 | | ||||
| 5 | 2 | 4 | ZZ | EL6-500 | 36403 | | ||||||
| 5 | 2 | 4 | ZZ | BTC-FR2.5TN.D09 | 3X4R5 | | ||||||
| 4 | 5 | 9 | 4 | SB | D | PB5A500 | 36403 | | ||||
| 5 | 9 | 4 | ZZ | B | DG500 W/MT500HS1B2 | 9S016 | | |||||
| 7 | 2 | 2 | ZZ | 200135717 | 98752 | | ||||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | D2 | 0 | 23 Aug 1974 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
D2
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Natick Research, Development and Engineering, Center, Natick, MA 01760-5014
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
23 Aug 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | 72D | Z | 9 | A | V | Z | D | 058280 | X | 33190 | SCIENTIFIC-INSTRUMENTS-NOI | 1 |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
P
Less Than Carload (LCL_CD_2760)
77.5
72D
Water Commodity Code (WRT_CMDTY_CD_9275)
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
D
Less Than Truckload (CLAS_RTNG_CD_2770)
200
058280
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
33190
Uniform Freight Classification (UFC_CD_MODF_3040)
SCIENTIFIC-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
W
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
NAVY: Ground Support Equipment-End Items
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
FLZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860
U
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC NF2: AF Equipment Management System (AFEMS); NAVY: Fast moving centrally managed 1I COG forms (locally procured at selected designated overseas activities)
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | 41 | 1 | 9,999.9 lbs | 717.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 89 | GB | AD | X | FG | 00 | 00 | O |
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | S | A | 42 | 1 | 000 | 210.0 lbs | 29in x 22in x 35in | 13.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | FA | MA | M | F2 | 00 | O | 00 | E | Q | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
41
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
X
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Validated Correction
S
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Secondary Inventory Control Activity (SICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
42
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
9,999.9 lbs
Unit Pack Weight (UP_WT_5153)
717.000 cu ft
Unit Pack Cube (UP_CU_5155)
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
210.0 lbs
Unit Pack Weight (UP_WT_5153)
29in x 22in x 35in
Unit Pack Size (UP_SZ_5154)
13.000 cu ft
Unit Pack Cube (UP_CU_5155)
89
Preservation Material Code (PRSRV_MAT_CD_5162)
Preserve with normal operating lubricant
GB
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, greaseproof, waterproof barrier
AD
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Cushion, anchor, block or brace as required.
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
FG
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D6251, Type III, Class 1, wood cleated plywood box, domestic
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
FA
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-P-130, laminated and creped wrapping paper
MA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
MIL-PRF-83671, Class 2, Grade A, flexible foam-in-place polyurethane
M
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
3 inches thick
F2
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D6251, Type III, Class 2, overseas cleated plywood box or ASTM-D6880, Class 2, heavy duty nailed wood box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
O
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container is not an acceptable shipping container.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| NTRD | Entry Date | 74-09-01 |
| FCLS | Functional Classification | AA-8.8 |
| FTLD | Functional Description | PORTABLE,QUICK ACTION,HIGH READABILITY; USED FOR TESTING TENSILE OR COMPRESSION STR OF FABRIC,PAPER,STRING,PLASTIC,& RUBBER,UP TO BREAKING PT OR FOR PILL CRUSHING OR PIERCING APPL; CONSTR TO WITHSTAND CONSTANT USE AT FULL LOADS |
| ANSX | Measurement Unit | POUND |
| APHE | Operation Method | MANUAL |
| AXGY | Mounting Method | PORTABLE |
| ATHC | Load Receiver Type | PLATFORM |
| RDAL | Reference Data And Literature | NA 17-15BU-3 & 17-20MF-05 |
| BBHK | Scale Range | 0 T0 500 LB |
| BBHL | Scale Smallest Increment Graduation | 1.00 LB SMALLEST INCREMENT |
| FEAT | Special Features | EXTENSION SPRING MAX EXTENSION LG 10 IN.; ACCESSORIES- 12 IN.RULE GRADUATED BY 1/64 IN.W/POINTER & MAGNIFIER,TWO CLEVIS W/0.375 IN.PINS,0.250 IN.DIA CORE ROD,& BRKT |
| BNKY | Torque Indicating Wrench Usage Feature | NOT INCLUDED |
| APQB | Unit Type | WEIGHING SCALE |
| BNLC | Spring Maximum Outside Diameter Accommodated | 4.875 INCHES |
| BNLD | Spring Maximum Overall Free Length Accommodated | 12.000 INCHES |
| BNLB | Spring Travel Gage | NOT INCLUDED |
| BNKX | Spring Type For Which Designed | COMPRESSION AND TENSION |
Back to TopBack to Top
