6685-00-248-6975
GAGE,COMPOUND PRESSURE-VACUUM,DIAL INDICATING
6685-00-248-6975 (6685002486975, 002486975)
Part Numbers (9 listings): 046646A | C500 | 25100502L30IMV60PSI | 25-1000-02L30HG60 | 25-1000-02L60PSI30VAC | 1004 | 46646A | 46646-0 | 046646 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 046646A | 3 - Design Control Reference | 2 - Production Item | AMETEK, INC. | 61349 |  |
| C500 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AMETEK, INC. | 61349 | |
| 25100502L30IMV60PSI | 5 - Replaced / Discontinued | 2 - Production Item | ASHCROFT INC. | 38056 |  |
| 25-1000-02L30HG60 | 5 - Replaced / Discontinued | 9 - No Longer Used | ASHCROFT INC. | 38056 | |
| 25-1000-02L60PSI30VAC | 5 - Replaced / Discontinued | 9 - No Longer Used | ASHCROFT INC. | 38056 | |
| 1004 | 5 - Replaced / Discontinued | 9 - No Longer Used | ASHCROFT INC. | 38056 | |
| 46646A | 5 - Replaced / Discontinued | 9 - No Longer Used | ORLANDO HELICOPTER AIRWAYS INC | 61348 |  |
| 46646-0 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMETEK, INC. | 61349 | |
| 046646 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMETEK, INC. | 61349 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 66 | 6685 | 002486975 | T179-B | 07424 | X | 1 | A | P | A | 1 Jan 1963 |
6685
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Pressure, Temperature, and Humidity Measuring and Controlling Instruments
T179-B
Federal Item Identification Guide (FIIG_4065)
07424
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 Jul 2003 | |||||||||||||||||||||||||||||
| WP01 | 1 Jan 2005 | |||||||||||||||||||||||||||||
| ZW01 | 1 Dec 2005 | |||||||||||||||||||||||||||||
| N9BG | N9GD | 1 | Q | Z | HD | GT | HX | HD | 1 Sep 2006 | |||||||||||||||||||||
| FXGG | FXCX | 1 | Q | Z | SX | 1 Sep 2006 | ||||||||||||||||||||||||
| MC41 | 1 | Q | Z | PA | 1 May 2007 | |||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
Q
Acquisition Method Suffix Code (AMSC_2876)
The government does not have adequate data, lacks rights to data, or both, needed to purchase this part from additional sources. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
HX Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Navy ICP, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 046646A | 61349 | | ||||||
| 3 | 5 | 1 | 4 | SE | D | C500 | 61349 | | ||||
| 5 | 2 | 5 | ZZ | 25100502L30IMV60PSI | 38056 | | ||||||
| 5 | 9 | 5 | ZZ | B | 46646A | 61348 | | |||||
| 1 | 5 | 9 | 4 | CX | B | 046646 | 61349 | | ||||
| 3 | 5 | 9 | 5 | SE | B | 1004 | 38056 | | ||||
| 3 | 5 | 9 | 5 | SE | B | 25-1000-02L30HG60 | 38056 | | ||||
| 3 | 5 | 9 | 5 | SE | B | 25-1000-02L60PSI30VAC | 38056 | | ||||
| 1 | 5 | 9 | 5 | SE | B | 46646-0 | 61349 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
SE
Reference Number Action Activity Code (RNAAC_2900)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
CX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Richmond, Richmond, VA 23297-5000
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | CX | 0 | 9 Feb 1970 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
CX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Richmond, Richmond, VA 23297-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
9 Feb 1970
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 652 | Z | 9 | A | V | Q | J | 121570 | X | 61770 | GAGES-AIR-LIQUID-LEVEL-PRESSURE |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
652
Water Commodity Code (WRT_CMDTY_CD_9275)
Instruments, Scientific
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Q
Air Special Handling Code (AIR_CMTY_HDLG_9215)
Extremely fragile items including delicate instruments.
J
Less Than Truckload (CLAS_RTNG_CD_2770)
100.2
121570
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
61770
Uniform Freight Classification (UFC_CD_MODF_3040)
GAGES-AIR-LIQUID-LEVEL-PRESSURE
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DM | SMS | D | U | 1 | Z | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | N | EA | 0 | |
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DM | SMS | D | U | 1 | Z | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | N | EA | 0 |
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | XXX |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | ZZ | E | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BGKY | Actuating Element Material | PHOSPHOR BRONZE |
| APCM | Actuation Type | SINGLE BOURDON TUBE |
| APCS | Adjustability | NONADJUSTABLE |
| BHMD | Bezel Type | SLIPS-ON |
| ADTV | Case Material | STEEL, DRAWN |
| ADTY | Case Surface Treatment | ENAMEL, GRAY OR ENAMEL, BLACK |
| BGRY | Connection Location | BOTTOM |
| ASMM | Connection Quantity | 1 |
| BHMG | Connection Size | 0.250 IN. NPT DIA |
| BHMK | Connector Type Vent | NOT PROVIDED |
| AWLS | Connection Type | EXTERNAL |
| ARCH | Dial Size | 2-1/2 IN. DIA |
| ANBJ | Graduation Unit | 10.0 INCHES AND 10.0 POUNDS PER SQUARE INCH |
| MATT | Material | STEEL |
| AXGY | Mounting Method | RIGID STEM |
| ABFY | Overall Depth | 1.125 INCHES NOMINAL |
| ASST | Pointer Type | INDICATING |
| ASSS | Pointer Color | BLACK |
| BHMF | Protective Crystal Material | PLASTIC OR GLASS |
| BGKS | Scale Accuracy | 2 PERCENT RATING MIDDLE HALF OF RANGE,3 PERCENT REMAINDER; 3 PERCENT RATING ENTIRE RANGE |
| BGKZ | Scale Inscription/Background Color | BLACK FIGURES ON WHITE BACKGROUND |
| ASTW | Scale Marking | VACUUM-PRESSURE |
| BGLC | Scale Name For Which Pointer Is Designed | PRESSURE-VACUUM |
| AQFZ | Scale Name | PRESSURE AND VACUUM |
| AWAG | Scale Smallest Increment | 2.0 INCHES AND 2.0 POUNDS PER SQUARE INCH |
| ATEQ | Scale Type | MULTIPLE |
| APSK | Scale Range | +0.0 TO 30.0 INCHES OF MERCURY AND +0.0 TO 60.0 POUNDS PRESSURE PER SQUARE INCH |
| ADAV | Overall Diameter | 2.718 INCHES NOMINAL |
| SFTT | Surface Treatment | ENAMEL OR ENAMEL |
Back to TopBack to Top
