Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
229 | 3 - Design Control Reference | 1 - Incomplete Part Number | WINTERS INSTRUMENTS | 35786 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
66 | 6685 | 008396404 | A27600 | 42787 | X | 4 | 9 | A | P | U | 1 Jan 1962 |
Pressure, Temperature, and Humidity Measuring and Controlling Instruments
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZR01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 1 | 5 | CX | 229 | 35786 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Richmond, Richmond, VA 23297-5000
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 98 | 0 | 1 Feb 1975 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
J | 653 | Z | 5 | A | M | Y | Z | 000000 | X | 00000 | NO-NMFC-FREIGHT-DESCRIPTION |
100.2
Musical Instruments
No special type of cargo code applicable
Protected (Pilferable)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Medical supplies, equipment, samples records, etc.
Protected cargo, other than above, including sensitive cargo requiring hand-to-hand receipt and/or security precautions.
No Rating
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
BKCM | Actuating Medium | MERCURY |
ABPM | Body Diameter | 0.656 INCHES NOMINAL |
ADAQ | Body Length | 6.000 INCHES NOMINAL |
BKBD | Bulb Tip Outside Diameter | 0.625 INCHES NOMINAL |
APGF | Design Type | FLUCTUATING |
BKCJ | Extension Neck Diameter | 0.750 INCHES NOMINAL |
AWMG | External Thread Size | 3/4 IN. NPT |
CBBL | Features Provided | LENS MAGNIFYING FRONT AND EXPANSION CHAMBER AND PROTECTIVE GLASS/PLASTIC |
MATT | Material | BRASS METER CASE |
AGQB | Neck Length | 2.500 INCHES NOMINAL |
BKBW | Immersion Length | 2.500 INCHES NOMINAL |
AWMH | Internal Thread Size | 1.1-4 IN. NPT |
BKCQ | Scale Adjustment Variation | 1 DIVISION |
BKCN | Scale Accuracy Rating | PORM 1 PCT FROM 90 TO 110 DEG RANGE |
BGKZ | Scale Inscription/Background Color | BLACK MARKING ON SILVER BACKGROUND |
CSYG | Scale Measurement Range | +30.000/+180.000 DEG FAHRENHEIT |
AWAG | Scale Smallest Increment | 1.0 DEG FAHRENHEIT |
ATEQ | Scale Type | METAL |
CSYR | Separable Socket Style | LAGGING STEM EXTENSION |
AGPM | Socket Overall Length | 12.375 INCHES NOMINAL |
ABHP | Overall Length | 12.000 INCHES NOMINAL |
STYL | Style Designator | 90 DEG BACK ANGLE |
SFTT | Surface Treatment | CHROMIUM METER CASE |
AEDN | Tip Length | 2.500 INCHES NOMINAL |