7025-01-043-1586

PRINTER,HIGH SPEED,AUTOMATIC DATAPROCESSING

7025-01-043-1586 (7025010431586, 010431586)
Part Numbers (2 listings): 101 | RO-510/G |
Summary

FSG 70 / FSC 7025

DEMIL: D

DEMIL INT:

HMIC: N

Date Created: 19 Jun 1977

Unit Weight: 9,999.9 lbs

Unit Size:

Unit Pack Cube: 1,503.000 cu ft

MSDS: None

Hazmat: None

Request a Quote


;


MASTER CROSS REFERENCE LIST (MCRL) | NSN 7025-01-043-1586 Submit RFQ
Manufacturer Part NumberRNCCRNVCManufacturer NameCAGE
1013 - Design Control Reference2 - Production ItemGENICOM CORP  50163      
RO-510/G5 - Replaced / Discontinued2 - Production ItemJOINT ELECTRONICS TYPE DESIGNATION  80058    CAGE 80058  
Code Definitions

3 - Design Control Reference

Reference Number Category Code (DRN_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

2 - Production Item

Reference Number Variation Code (DRN_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.


FLIS - SEG A - IDENTIFICATION | NSN 7025-01-043-1586 Submit RFQ
FSGFSCNIINFIIGINCCRITICALITYTYPE OF ITEMMRCDEMILHMICEDCPMICADPECDATE CREATED
707025010431586A2390077777XM1DNU19 Jun 1977
Code Definitions

70

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)


Automatic Data Processing Equipment (Including Firmware), Software, Supplies and Support Equipment

7025

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)


ADP Input/Output and Storage Devices

010431586

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)


NSN 7025-01-043-1586

A23900

Federal Item Identification Guide (FIIG_4065)

77777

Item Naming Code (INC_4080)

19 Jun 1977

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)


The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

M

Type of Item Identification (TYP_II_4820)


Partial Descriptive - Reference Item Identification (Type 1A Concept)

1

Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)


An approved item name does not exist.

D

Demilitarization Code (DEMIL_CD_0167)


MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)

N

Hazardous Material Indicator Code (HMIC_0865)


Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

U

Precious Metals Indicator Code (PMIC_0802)


Precious Metal Content is unknown.


Similar & Related NSN Parts

FLIS - SEG B - MOE RULE DATA | NSN 7025-01-043-1586 Submit RFQ
MOE RuleFormer MOEAMCAMSCNIMSCIMCIMC ActivityAACDSORCollaboratorsReceiversEffective Date
G51000C1 Apr 1991
Code Definitions

0

Acquisition Method Code (AMC_2871)


Not Established

C

Acquisition Advice Code (AAC_2507)


SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.


FLIS - SEG C - REFERENCE NUMBER | NSN 7025-01-043-1586 Submit RFQ
RNFCRNCCRNVCDACRNAACRNSCRNJCSADCMSDSHCCReference NumberCAGE
4326SJA101  50163  
526SJRO-510/G  80058   CAGE/80058
Code Definitions

4

Reference Number Format Code (RNFC_2920)


Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

3

Reference Number Category Code (RNCC_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

2

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

6

Document Availability Code (DAC_2640)


The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

SJ

Reference Number Action Activity Code (RNAAC_2900)


Air Force Cryptological Support Center, San Antonio, TX 78243-5000

A

Reference Number Status Code (RNSC_2923)


Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.

5

Reference Number Category Code (RNCC_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.


FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 7025-01-043-1586 Submit RFQ
ISCOriginatorNIIN StatusReplaced / Replacement ISCReplaced / Replacement OriginatorReplacement NIIN StatusReplacement DateReplaced / Replacement NSNDecision Date
6TU04 Jan 1984
Code Definitions

6

Item Standardization Code (ISC_2650)


An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.

TU

Originator of Standardization Decision (ORG_STDZN_DEC_9325)


AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094

0

NIIN Status Code (NIIN_STAT_CD_2670)


Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

4 Jan 1984

Standardization Decision Date (DT_STDZN_DEC_2300)


FLIS - SEG G - FREIGHT DATA | NSN 7025-01-043-1586 Submit RFQ
IntegrityOriginatingHMCLCLWCCTCCSHCADCACCASHLTLNMFCNMFC Sub ItemUFCFreight DescriptionRail Variance
SJ
Code Definitions

SJ

Originating Activity Code (ORIG_ACTY_CD_4210)


Air Force Cryptological Support Center, San Antonio, TX 78243-5000

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)


No Variation. NMFC and UFCC Match.


FLIS - SEG W - PACKAGING DATA | NSN 7025-01-043-1586 Submit RFQ
SourcePICA / SICAPackaging CategoryStoragePreservationClean/DryINT QtyUnit WeightUnit SizeUnit Pack CubeItem WeightItem Dims
APDW19,999.9 lbs1,503.000 cu ft
Preservation MaterialWrapping MaterialCushioning / DunnageCushioning ThicknessUnit ContainerIntermediate ContainerUnit Container LevelSpecial MarkingLevel A PackingLevel B PackingMinimal PackingOptional Procedure
00XFF0005O
Code Definitions

A

Packaging Data Source Code (PK_DTA_SRC_CD_5148)


Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats

P

Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)


Primary Inventory Control Activity (PICA)

DW

Method of Preservation Code (MTHD_PRSRV_CD_5160)


Preserve by Method 52 as follows: Item shall be cleaned, wrapped, blocked and braced in an interior carton fabricated in accordance with ASTM-D5118, Class domestic. MIL-PRF-131 barrier material, sealed as required, shall be utilized around the first container. The cushioning, to be specified under the cushioning code and in the thickness required to adequately protect the item, shall be placed between the barrier and the outer container.

1

Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)


Any suitable process that is not injurious to the item.

9,999.9 lbs

Unit Pack Weight (UP_WT_5153)

1,503.000 cu ft

Unit Pack Cube (UP_CU_5155)

00

Preservation Material Code (PRSRV_MAT_CD_5162)


No requirement

X

Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)


As required to protect the item or elements of the package

FF

Unit Container Code (UNIT_CTNR_CD_5166)


ASTM-D6251, Type III, Class 2, wood cleated plywood box, overseas

00

Intermediate Container Code (INTMD_CTNR_CD_5167)


No requirement.

05

Special Marking Code (SP_MKG_CD_5169)


Delicate instrument

O

Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)


Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.


FLIS - SEG M/V - CHARACTERISTICS DATA | NSN 7025-01-043-1586 Submit RFQ
MRCDecoded RequirementClear Text Reply
TEXTGeneral Characteristics Item DescriptionPHYSICAL CHARACTERISTICS: PRINT RATE- 165 CHARACTERS PER SEC,60 LINESPER MIN (132-CHARACTER LINE) 200 LINESPER MIN (20-30 CHARACTERS),TRANSMISSION RATE- 100 TO 9600 BAUD SERIAL,UP TO 75000 CHARACTERS PER SEC PARALLEL,DATA INPUT-PARALLEL,PAPER REQUIREMENTSTANDARD SPROCKETED PAPER,ORIGINAL AND UP TO 4 CARBON COPIES,CHARACTER STRUCTURE-5 X 7 DOT MATRIX 10 POINT TYPE EQUIV,INPUT LANGUAGE-USASII-64 CHARACTERS STD,PAPER FEED- PIN FEED,ADJUSTABLE FROM 4.000 IN. TO 14.875 IN. W,SWITCH CONTROLS- ON/OFF,SELECT,TOP OF FORMS,FORMS OVERRIDE,INDICATORS- ON/OFF,PAPER OUT,SELECT,MANUAL CON-TROLS- FORMS THICKNESS,PAPER ADVANCE KNOB,132 CHARACTER BUFFER (1 LINE),PRINTING STRUCTURE- 132 CHARACTERS PERLINE,6 LINES PER IN.,DIM- 27.750 IN.W,20.000 IN. D,11.500 IN. H,SPECIALINTERFACES TO POPULAR COMPUTERS,OPERATING TEMP P40.0 TO P100.0 DEG F,ELECTREQUIREMENTS- 115/230 VAC,50/60 HZ,SINGLE PHASE

Questions?


Want to know more about our Defense Services?


Contact Us. We are here to help.


Questions?


Have any questions regarding a Request For Quote?


Contact Us. We are here to help.


Questions?


Ask about our Supply Management Services.


Contact Us. We are here to help.


Back to Top
Back to Top