LO-9-2350-238-12
RECOVERY VEHICLE, FULL TRACKED LIGHT, ARMORED, M578
LUBRICATION ORDER
APRIL 1992
LO-9-2350-238-12 - Page 26 of 45
SEMIANNUAL NOTES (CONTINUED)
Note 42
AUXILIARY DRIVE DRAIN AND FILL
A
B
C
D
E
WARNING
Oil will be hot after operation.
Not e
Drain only after operation.
Remove engine crankcase drain cover (1) from bottom of hull.
Remove auxiliary drive drain cap (2) and drain oil into a suitable
container.
WARNING
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
After draining, clean auxiliary drive drain cap (2) with solvent
SD2 and install drain cap and engine crankcase drain cover (1).
Open fill cap (3). Fill with oil (OE/HDO or OEA) until oil level is
within FULL and ADD marks on gage (4).
Clean and close fill cap (3).
Note 43
TOW WINCH BREATHER
I
WARNING
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
A Remove breather (1) and clean with solvent SD2.
B Dry, inspect, dip in oil (OE/HDO), and install.
I
Card 24 of 40
LO 9-2350-238-12
Back to Top
