TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 26 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 15 of 24)
9.
Install two fabricated final drive guide shields (Fig.
1, Appendix F) (one behind each final drive
universal joint).
10.
Using hoist with sling, lift powerplant over open
grille doors into position over engine compartment.
11.
Have persons station themselves to help guide
powerplant as it is lowered into tank.
12.
Lower powerplant slowly with frequent stops while
checking for clearance all around powerplant.
13.
Guide transmission rollers (C) to top of powerplant
guides (D).
14.
Make sure transmission rollers (C) fit into guides
(D) on both sides of tank.
15.
When powerplant is seated, remove both
fabricated final drive guide shields.
Go on to Sheet 16
TA147917
5-16
Back to Top
