TM 9-2350-261-20-4
REPLACE DRIVER’S WINDSHIELD AND BRACKETS — Continued
0624 00
INSTALLATION
NOTE
Install the heads of outside screws (toward hatch) down and the heads of inside screws (away
from hatch) up to prevent interference.
1.
If windshield (1) is to be installed, secure five brackets (2) and plates (7) to driver’s hatch periscope guards (5) with five
outside screws (4), five inside screws (6), and ten new locknuts (3).
2.
Install windshield (1) in five brackets (2).
END OF TASK
0624 00-2