TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 6 of 596
TM 9-2815-205-34
WARNING
Provide adequate support for heavy components to prevent injury to personnel
from component falling during removal.
I WARNING I
Hot metal components dissipate heat quickly and will cause burns to personnel.
Wear heat-resistant gloves when handling heated parts. If you receive burns,
immerse burn in cold water and seek medical aid.
I WARNING I
Use goggles, rubber gloves, and rubber apron when cleaning parts in carbon
removing compound. Provide adequate ventilation. Avoid inhailng fumes and
contact with skin. if compound is splashed on skin, flush with water and wash
with alcohoi. Alcohol containing 2 or 3 percent camphor is preferable. if contact
with eyes is made, flush eyes with water and get medical aid immediately.
I WARNING I
Do not grasp or graze sharp edges of oil control rings with bare hands. Rings are
extremely sharp and can cut personnel when mishandled.
WARNING
Wear safety glasses when working with a pressurized air system. Make certain
air pressure is fully vented before disassembly. Sudden release of air pressure
can throw liquid or debris resulting in serious personal injury. Injury to eyes and
inner ears can result from failure to properly vent system before disassembly.
WARNING
Springs under compression may release airborne parts. Wear eye protection
and use care when disassembling components. injury to personnel may result.
1,1,1 trichioroethane solution is toxic. Wear protective goggles and gloves and
use in a well-ventilated area to avoid personal injury. Avoid breathing the fumes
or direct contact with your skin.
Use recommended safety equipment as
required.
b
Back to Top
