PS Magazine - JUNE 1976

PS, The Preventative Maintenance Monthly

ISSUE 283

JUNE 1976

PS Magazine - JUNE 1976 - Page 26 of 35
Those grease wicks in the R0-313
may
need
reversing
to
distrIbute
grease evenly.
Sometimes ±he grease wicks get lazy
and let the grease settle along the
bottom edge of the wicK² To get the
grease
spread
around,
loosen
the
wick³hoLding screws and reverse the
wicks´ This wilL evenly distribute the
grease´
µf you need to add grease, use Mµ¶·
G¸¹545CºtyPe high temperature air»
craft grease on the wicKs² NSN 9¼5½-
½½¾223¸4½½3
for a 1¸Lb can of the
After draining the oiL oUt oF your
high¸speed card punch's pUnch head
and
fLUshing
it
cLean
with
freon
solvent, like it says in para 4¸9 of T¿
11¾744½À217¸15 (¿ay 7½)Á put in new
Soroban #9½Âtype oiÃÄ
ShaKe the can ofÅ oiL at least one
minute
jUst
before Æ refilling
each
reservoir´ µf you don't do thisÇimporÈ
tant additives sÉay in the Bottom of the
can² This'll lead to a pUnchy punch
head´
You know you'vE put in enoUgh oil
when you've measÊred oUt 9% ouncËs
Ì
of oiL or the oil LeveL has reached the
two-thirds
LeveL
windowÍ
Wait until yoÎ have replaced the
pUnch
head in the
R0Â312 Ïefore
eyeing thÐt oiL level, thoughÑ Òecause
of the head's angle of installation, the
oil level
an change´
l
\
i


Back to Top
Back to Top