PS Magazine - NOVEMBER 1980

PS, The Preventative Maintenance Monthly

ISSUE 336

NOVEMBER 1980
PS Magazine - NOVEMBER 1980 - Page 30 of 35
I
Ii
Keep a sharp PM eye on the molded
seals on your MW24B 2
Y-c
yd scoop
loadeR's
starter-or
accelerator±
cable.
These 2 seals-cable rod seal NSN
5330²00³168³5686
and
sleeve
seal
NSN 5330³00³168³5489-keep water
out of the cable housing.
56
But water rI´s past damaged, looseµ
fitting or missing seals and rusts the
cable sleeve. When you try to start up
the loader, the rUst³frozen accelerator
cable won¶t budge. Stomping on the
pedal or hitting it with a roc· won¶t
free the cable .
.. just Damage or break it
at tHe upper ball joint.
¸elp¶s here.
The
scoop
loader
headshed
has
O¹¶d using hose clamp NSN 4730³00³
230º2959 to hold the seals in place.
-
±².³´µ·¶¸¹º»»¼½¾¿ÀÁÂÃÄÅ Æ Æ½Å¸¸¶Ç´ÈÉÊËÌÍÎϸÐÑ
Other Cable
PM T±ps
AdjUst the tHrottle control assembly
li·e it says in Fig 4»5, and para 4³18,
TM 5²3805¼251³12 (Oct 72).
½emember, you have 2 seals at the
upper cable end and 2 at the lower
connection fuel injection pump con¾
trol arm.
These NSN¶s for the 2 seals and the
clamp will show up in a change to TM
5³3805¼251³20P ¿ul 74). The SM½
codes will be P AOZZ.
:
Back to Top
Back to Top