PS Magazine - TB 43-PS-503

PS, The Preventative Maintenance Monthly

ISSUE 503

OCTOBER 1994

PS Magazine - TB 43-PS-503 - Page 31 of 51
Dear EditoR
When the feeder on the AH-1 's 20±MM
machine gun won²t work, most units fIx the
problem by having suppo³ replace the
solenoid´ NSN 5495-00µ921±5129, which costs
more than $150.
We¶ve found that simply replacing the
solenoid·s connector receptacle oFen does the
trick. ¸t comes with NSN 5935¹01º150»8755 and
costs around $15¼
Bob Nelson
F
Bliss,
T
RecptaCle
We're receptive to your RECeptaCle Idea.
AH-1
Crews Can preVent feed±r
problems by not Setting the feeder down on ²ts ³oleno²d´
Dear WindY½
¾ar too o¿en´ when a mechanic rushes to change a landing light
Àn the Áeld´ one of the retaining ring screws Às dropped and lostÂ
Save that screw and the time Ãt takes to replace Ãt by puTting a
ÄÅ-Ln strip of shrink wrap´ NSN 5970µ00¹812-2968, around the base
of each of the three screws.
Put the wrap on while the screws are through the retaining ringÂ
hE
Æhen use a heat gun to shrIÇk Àt
s±rink
Àn place.
±y²³´µ¶·¸
s²ws
,
in pLa³
screws, but they won t fall out
from the retaining ring when you
replace a landing lÈght.
1 SGÆ Andy
´.
BoÉÊnger
OHAËNG
D±ar F²rSt µeRGeant Bol¶nge·
THank³ fo¸ t¹e t²p! µ¹rink wrap
m
not be t¹± only way
to go, t¹oUg¹º
µ
few wrap» of tap± mIg¹t do t¹e job¼ too½
A


Back to Top
Back to Top