Field Table .
..
Dear EditoR
When you move field table, NSN
swing free at any time. Anyone
carrying the table could be injured²
I've come up with an inexpensive
fIx
that holds the legs in place²
You³ll need a quick-release pin´
NSN 5315µ01-424-3850± and a self¶
tapping screw· NSN 5305¸00¹432º
4170»
Order the pin
on a DD Form
1348¸6 and put
"NSN not on
AMD¼½ in the
¾emarks block¿
The drill and bits come from the
Common shop sets.
HereÀs the
fIx:
1Á Lay the table on its top with
the legs in the stored positionÂ
Measure five inches in from where
the legs are joined to the table²
Mark the table frame»
2² Drill a Ã/Ä-in hole through both
the table frame and the leg»
3±
Measure five Inches From the table leg
onTo the leg cross baR.
njJ
PS 5²4
56
4Á DÅÆll a ÇÈɸin hole through
the cross barÊ Insert the self¶
tapping screw through the
ring on the quick release
pinËs lanyardÊ Screw the self¶
tapping screw into the Ì/ÍÎ-in
hole in the cross barÁ
³´
PUt The quICk-release p±n thrOUgh
the hole IN The ²³a´e aµd taBle Legs¶
¾epeat this procedure for
the other set of legs»
SGT ¾oberto ¾ivera
502d Med Co (DS)
µ
Hood± TX
FROM THE DESK OF THE
"f
You sAw A prOBLEm AnD cAm¶ up
W·th
a
solutiOn. GOOd jOb,
¸¶rg¶AN¹º
M»y97