PS Magazine - TB 43-PS-554

PS, The Preventative Maintenance Monthly

ISSUE 554

JANUARY 1999
PS Magazine - TB 43-PS-554 - Page 11 of 43
Brush Guard Drill ±n² Drain
T
hat hollow brush guard on
M915A2, M916A1, M916A2 and
M917A1 trucks is ripe for corrosion
and damage because it fills with
water±
The water causes rust in warm
weather and becomes ice in the cold±
Freezing water can split the tubing±
Take care of both problems by drill-
ing a
1
/
4
-in hole in the bottom of the
guard²s cross rail±
Use green CARC paint, NSN 8010-
01-229-7546, for touch-up±
Heater, blower motor,
ome of the parts for the hot water
heater on your 5-ton trucks were
left out of TM 9-2320-272-20P±
M939/M939A1-Series Trucks ± ± ±
Ventilator, NSN
Seal, NSN
Canister, NSN
Adhesive (for seal),
Here are the
ones you need.
..
Drill hole in brush guard
11
JAN 99
M915A2/M916A1/M916A2/M917A1 Trucks ± ± ±
Back to Top
Back to Top