PS Magazine - TB 43-PS-579

PS, The Preventative Maintenance Monthly

ISSUE 579

FEBRUARY 2001
PS Magazine - TB 43-PS-579 - Page 15 of 33
PS 579
PS 579
FEB 01
26
E
very good operator knows it’s important to keep an eye on the sight gauges
behind the mixer’s cement bin.
Those gauges monitor cement flow and water-
to-cement ratios.
But, some paint shops spray right over the sight gauges.
Then your operation
is guesswork.
Save yourself all that guesswork by using masking tape to cover sight gauges
before your mixer goes to the paint booth.
Tape over the JOG, RAISE and LOWER switches on the winch control box,
too.
Those switches control the mixing trough during concrete placement.
M919 Concrete-Mixer . . .
579. 26-35 (C)
1/11/01
1:14 PM
Page 1
Back to Top
Back to Top