PS Magazine - TB 43-PS-606

PS, The Preventative Maintenance Monthly

ISSUE 606

MAY 2003

PS Magazine - TB 43-PS-606 - Page 31 of 32
Dear Sergeant J.F.
SKO CLs are just beginning
to identify TMDE that requires
calibration. A better method
would be to order EM 0022,
TM 43-TMDE (IDN 344568),
through normal publications
channels. This CD contains all
TMDE regulations and
instructions for identifying
and calibrating
your equipment.
look at
all these
tools!
now I have to
figure out which
ones are going to
need calibrating
every year.
no problem.
just look in
em 0022.
Packaging Help to Deploying Units
On-site packaging assistance is available for deployable units. Assistance, available for all
classes of supply, includes item protection, load planning, marking, preparing HAZMAT for trans-
port, and more. Reduced deployment response times, equipment arriving in serviceable condi-
tion, and timely, accurate shipments are major assistance benefits. Response time can be within
48 hours. Direct requests to the LOGSA Emergency Operations Center, (256) 955-0883, (256) 313-
6083, DSN 645-0883 or DSN 897-6083.
PLGR Alert
Users of AN/PSN-11, NSN 5825-01-374-6643, precision lightweight GPS
receiver (PLGR), or AN/PSN-11(V)1, NSN 5825-01-395-3513, be aware of
CECOM Ground Precautionary Message, GPM 2003-008. This message
must be implemented by your unit. Check now to see if it has.
M113A2/A3 Hatch Locking Pin
Use NSN 5315-01-266-6508 to order a new locking pin for the hatches on your M113A2/A3
family of vehicles. The NSN listed in TM 9-2350-261-24P (Apr 98) (Item 26 in Fig 232, Item 10 in
Fig 238, Item 27 in Fig 241, and Item 19 in Fig 250) and TM 9-2350-277-24P (Sep 97) (Item 32 in
Fig 204, Item 26 in Fig 207, Item 27 in Fig 212, Item 3 in Fig 217, and Item 20 in Fig 253) is no
longer available.
Modernized Tool Info Online
TACOM-Rock Island has put lots of
info online on some of the newer
modernized tools. If you're looking
for general info, pictures, specifica-
tions, and warranty info on the gen-
eral mechanics tool kit (GMKT), new
aviation tool set-armament (NATS-A),
TK-105 electronic repairman tool kit,
or the small arms tool kit, go to
modsko.htm.
If you have questions about the tool
kits, contact TACOM-RI's Dan Stark at
(309) 782-0131/DSN 793-0131 or
e-mail
starkd@ria.army.mil
Ammo TB Now Available
The ammunition handling, transportation and storage
articles found in PS 600 (Nov 02), PS 601 (Dec 02) and
PS 602 (Jan 03) are now available as a complete set in
TB 43-0250,
Ammunition Handling, Storage and
Safety.
Order your copies now through the publica-
tions system using PIN 080612-000. You can also view
and download the TB from the LOGSA website at
The TB has a distribution restriction code of C (avail-
able to US government agencies and their contractors
only), so you’ll need a logon ID to access it. Click on
Request ETM Access and follow the instructions.
Once you have access, just enter the TB number or
PIN number in the appropriate blocks to search the
database.
PS 606
MAY 03
60
Tools…
What
Needs
Calibrating?
Dear Half-Mast,
Is there any way to look
at a sets, kits, and outfits
(SKO) component list (CL)
for a tool set and tell
which tools in it need to
be calibrated annually?
SFC J.F.
Water Purification Unit…
a
600-GPH reverse osmosis water purifica-
tion unit (ROWPU) that hasn’t run in a while
might shock you! That’s because the unit’s
ground may be corroded, not connected or
gone.
Any time your ROWPU has sat idle for a
while, look for broken wires or loose connec-
tions inside and outside the junction box.
Eyeball the connections on the ground
wire at the frame and the rod. Look for cor-
rosion or a loose connection. Also make sure
each pump has a ground.
If you find anything wrong with the
ground, fix what you can and report what you
can’t before you or anyone else uses it.
Eyeball connections on ground
wire at frame and rod
Look for
corrosion
or a loose
connection
a
jolt
from
head to toe!
Look inside for
broken wires
Look for
loose cables


Back to Top
Back to Top